The tests that check the establishment of a secure channel currently only test
security level 3. Also the get_data command after it only tests data reception
from the card.
Let's extend the test coverage and test the SCP establishment for security
level 1 as well. Let's also add a get_status command to make sure sending data
to the card also works (without exceptions).
Related: OS#6367
Change-Id: Idff40b414a249e532df1bdce2a8deb9b0cb9718f
When we configure the tests to display file content, we only display files that
we compare, let's also display log file contents from pySim-shell. This will
be useful in situations where we only have log output from the tests, but no
access to the file system of the test host.
Related: OS#6601
Change-Id: Ibf6f78d7e71c213c7ca1caaf21c4c890e892261e
When pySim-shell is called by a testcase, a logfile is createted. The logfile
filename contains the testcase name. However, a testcase may run pySim-shell
multiple times. In this case we overwrite the log from previous run. Let's use a
counter to generate unique file names for each run, so that we won't lose logs
from previous runs.
Related: OS#6601
Change-Id: Ib2195d9b2231f74d0a6c4fb28f4889b6c45efb1e
When we get rid of temporary files, we delete those using a wildcard,
but for the logs from pySim-shell we explicitly memorize the name
of the pySim-shell logfile and delete it later by this explicit
name. This is not necessary, let's just delete all log files present
using a wildcard.
Related: OS#6601
Change-Id: I09dc7e59d1a3dcb68f54e3a8dccb86a1bc6c9ee6
This adds a construct + pyosmocore.tlv based declarative encoder/decoder
for the EF.EARFCNList file used in the context of NB-IoT in later
release USIMs.
Change-Id: I16797ca58c3ad6ebaf588d04fec011a0cbcfcef3
The problems with test_list_and_rm_notif (see also change id
I7d0b6a998499d84f0eb4e24592ad43210ac54806) are now resolved, so
we can re-enable the testcase now.
Closes: SYS#7094
Change-Id: I95eb3b9c02a69653797851197e882ea9316805fc
Even though our tests are written in a way that they shouldn't interfere
with each other, it may happen that one testrun writes content to a file
that upsets a different testrun. The resulting problems are often
difficult to diagnose.
To minimize the problem, let's add code that can reset the cards to a
defined state. This can be done using pySim-shell's export
feature. We can generate a backup from a known good state and then play
back the backup to reset files that have been changed. Files that didn't
change will not be written thanks to the conserve_write feature of
pySim-shell.
Related: OS#4384
Change-Id: I42eaf61280968518164f2280245136fd30a603ce
We now have a construct based encoder/decoder for the record content
of EF.MSISDN. This means that we do not need the functions enc_msisdn
and dec_msisdn in the non-legacy code anymore. We can now move both
to legacy/utils.py.
Related: OS#5714
Change-Id: I19ec8ba14551ec282fc0cc12ae2f6d528bdfc527
The encoding of EF.MSISDN is currently done with enc_msisdn and
dec_msisdn from utils.py. Let's replace this with a construct
based model, similar to the one we already use with EF.ADN
Related: OS#5714
Change-Id: I647f5c63f7f87902a86c0c5d8e92fdc7f4350a5a
In our construct models we frequently use a context parameter "total_len",
we also pass this parameter to construct when we decode files, but we
do not pass it when we generate files. This is a problem, because when
total_len is used in the construct model, this parameter must be known
also when decoding the file.
Let's make sure that the total_len is properly determined and and passed
to construct (via pyosmocom).
Related: OS#5714
Change-Id: I1b7a51594fbc5d9fe01132c39354a2fa88d53f9b
The testcase euicc.test_list_and_rm_notif fails due to a problem
with the eUICC. The eUICC reports the following error when a
delete notification attempt is made:
"delete_notification_status": "undefinedError"
Let's temporarily disable this testcase until the problem is resolved.
Change-Id: I7d0b6a998499d84f0eb4e24592ad43210ac54806
This patch adds a comprehensive testsuite for pySim-shell. The testsuite
is based on python's unittest framework in combination with pySim-shell
scripts.
Related: OS#6531
Change-Id: Ieae1330767a6e55e62437f5f988a0d33b727b5de
Our test cards need to stay recognizable, so it is important that
each card has a unique ICCID. This means we must write an individual
ICCID, when we test writing the ICCID.
Related: OS#4384
Change-Id: I858a35e526e7b4868e901222d587258412779f41
The sysmoISIM-SJA2 does not support changing of the ICCID.
pySim-prog will also reject this, so let's remove the ICCID
from the parameter list.
Related: OS#4384
Change-Id: I89571f2bf7c4cec4d621c322a58687b7781b0ed2
We're creating a 'pyosmocom' pypi module which contains a number of core
Osmocom libraries / interfaces that are not specific to SIM card stuff
contained here.
The main modules moved in this initial step are pySim.tlv, pySim.utils
and pySim.construct. utils is split, not all of the contents is
unrelated to SIM Cards. The other two are moved completely.
Change-Id: I4b63e45bcb0c9ba2424dacf85e0222aee735f411
When probing for cards, the probing might fail in case the terminal
is empty. This results into lengthy error log output that is not
of interest.
Related: OS#6532
Change-Id: I1d44f9458a05992d79b0152d3affcfeb783cccff
When the test detects a card, but does not find the .data faile for
it, then it fails. This can be a problem in case we want to intentionally
exclude a specific card model.
Related: OS#6532
Change-Id: Iba196ada0076385de7bffcb157a85fda0a6c1852
The test currently expects all reader slots to be populated. This means
the cards may plugged into a random order, but there may not be any empty
slots in the system at all. This requirement is easy to meet when each
card has its own single-slot USB PCSC-reader, but as soon as multislot
readers are used there may be some empty slots.
Related: OS#6532
Change-Id: I7ba1d1350b6998d65e90408184accdb212556a7c
We currently have the shell script that performs the test in the
tests directory and the related data in pysim-testdata directory.
This is confusing, let's have evrything in a dedicated sub directory
Change-Id: Ic995a7f600d164fc0be3c2eb8255dbe043429bea
Related: OS#6531
We currently have the test data for pySim-trace in pysim-testdata.
This means we mix the test data with the data from our original
pySim integration tests. This is very confusing. Let's put the
test data and the testcase for pySim-trace into a dedicated
sub directory.
Change-Id: I565b4268a05c1a1334b5e7d3fbcd9ef2ef0f0c4c
Related: OS#6531
We currently mix the unit-tests with the shell script based integration
tests. Let's put them into a dedicated sub directory.
Related: OS#6531
Change-Id: I0978c5353d0d479a050bbb6e7ae5a63db5e08d24
In the past, we always wrapped a HexAdapter around bytes-like data in
order to make sure it's printed as hex-digits. However, now that we are
doing JSON output it's much easier to let the pySim.utils.JsonEncoder
take care of this in a generic way.
We should do a similar migration all over pySim (pySim-shell,
filesystem, etc.) - but for now only do it in the low-hanging fruit of
pySim-trace aka pySim.apdu
Change-Id: I0cde40b2db08b4db9c10c1ece9ca6fdd42aa9154
This implements the first parts of the "GlobalPlatform Remote
Application Management over HTTP Card Specification v2.3 - Amendment B,
Versoin 1.2". Specifically, this patch covers the TLV definitions for
the OTA message used for HTTPS session triggering.
This also adds some more unit test coverage to pySim.cat, based on
real-world data that was captured nested inside the HTTPS Administration
session triggering parameters.
Change-Id: Ia7d7bd6df41bdf1249011bad9a9a38b7669edc54
the COMPACT-TLV variant is a TLV variant that ISO7816 uses for encoding
tag and length into a single octet. This is used (for example) in ATR
historical bytes.
Let's add support for this to our pySim TLV encoder/decoder.
Change-Id: I9e98d150b97317ae0c6be2366bdaaeaeddf8031c
Let's make sure the constructor of ProfileElement subclasses set
meaningful defaults to the self.decoded member, so that the to_der()
method can actually encode it. This is required when constructing
a profile from scratch, as opposed to loading an existing one from DER.
Also, add a test to verify that the encoder passes without exception;
doesn't test the generated binary data.
Change-Id: I401bca16e58461333733877ec79102a5ae7fe410
So far we only implemented command encoding and response decoding.
Let's also add command decoding, which is useful for example when
decoding protocol traces.
Change-Id: Id666cea8a91a854209f3c19c1f09b512bb493c85
pySim/sms.py:23:0: W0404: Reimport 'Flag' (imported line 23) (reimported)
pySim/sms.py:54:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:60:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:120:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:132:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:137:4: C0103: Method name "toSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:141:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:188:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:192:8: W0612: Unused variable 'flags' (unused-variable)
pySim/sms.py:209:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:228:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:236:4: C0103: Method name "fromSmppSubmit" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:279:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:306:12: W0107: Unnecessary pass statement (unnecessary-pass)
pySim/sms.py:311:12: W0107: Unnecessary pass statement (unnecessary-pass)
pySim/sms.py:319:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:339:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:347:4: C0103: Method name "fromSmppSubmit" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:373:4: C0103: Method name "toSmpp" doesn't conform to snake_case naming style (invalid-nam
Change-Id: I8082a01443ef568eebda696239572f0af7b56f1b
In smart cards, we every so often encounter data types that contain a
bit-mask whose length depends on whether or not there are any of the
least-significant bits are set. So far we worked around this with
some kind of Struct('byte1', 'byte2'/COptional, 'byte3'/COptional)
approach.
Let's do thisin a generic way using the new StripTrailerAdapter.
Change-Id: I659aa7247c57c680895b0bf8412f9e477fc3587d
GlobalPlatform requires the use of the KCV for DES + AES keys. Let's
implement that.
(11.8.2.3.3: "For all key types described in section B.6, the Key Check
Value shall be present.")
Change-Id: Ief168a66dee58b56f4126db12829b3a98906c8db
This adds an implementation of the GlobalPlatform SCP03 protocol. It has
been tested in S8 mode for C-MAC, C-ENC, R-MAC and R-ENC with AES using
128, 192 and 256 bit key lengh. Test vectors generated while talking to
a sysmoEUICC1-C2T are included as unit tests.
Change-Id: Ibc35af5474923aed2e3bcb29c8d713b4127a160d
This implementation of GlobalPlatform SCP02 currently only supports
C-MAC and C-ENC, but no R-MAC or R-ENC yet.
The patch also introduces the notion of having a SCP instance associated
with a SimCardCommands instance. It also adds the establish_scp0w and
release_scp shell commands to all GlobalPlatform Security Domains.
Change-Id: I56020382b9dfe8ba0f7c1c9f71eb1a9746bc5a27
Let's simply use the matchingId for filesystem lookup of the UPP file.
This way we can have any number of profiles by simply creating the
respeective files.
Change-Id: I0bc3a14b9fdfcc6322917dd0c69d8295de486950
The DGI encoding is specified in Annex B of the
"GlobalPlatform Systems Scripting Language Specification v1.1.0"
which is an "archived" specification that is no longer published
by GlobalPlatform, despite it being referenced from the GlobalPlatform
Card Specification v2.3, which is the basis of the GSMA eSIM
specifications.
For some reason it was the belief of the specification authors that
yet another format of TLV encoding is needed, in addition to the BER-TLV
and COMPREHENSION-TLV used by the very same specifications.
The encoding of the tag is not really specified anywhere, but I've only
seen 16-bit examples. The encoding of the length is specified and
implemented here accordingly.
Change-Id: Ie29ab7eb39f3165f3d695fcc1f02051338095697
This commit introduces the capability to parse and encode
SimAlliance/TCA "Interoperable Profiles" and apply personalization
operations on them.
Change-Id: I71c252a214a634e1bd6f73472107efe2688ee6d2
This commit introduces
* the osmo-smdpp.py program implementing the main procedures and the
HTTP/REST based ES9+
* python modules for ES8+ and non-volatile RSP Session State storage
* the ASN.1 source files required to parse/encode RSP
* 3GPP test certificates from SGP.26
* an unsigned profile package (UPP) of a SAIP v2.3 TS48 test profile
As I couldn't get the 'Klein' tls support to work, the SM-DP+ code
currently does not support HTTPS/TLS but plan HTTP, so you either have
to modify your LPA to use HTTP instead of HTTPS, or put a TLS proxy in
front.
I have successfully installed an eSIM profile on a test eUICC that
contains certificate/key data within the test CI defined in GSMA SGP.26
Change-Id: I6232847432dc6920cd2bd08c84d7099c29ca1c11
