catarrh/pysim
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/pysim.git synced 2026-03-16 18:38:32 +03:00
Code Issues Packages Projects Releases Wiki Activity

pySim/transport: fix GET RESPONSE behaviour

Browse Source 
The current behavior we implement in the method __send_apdu_T0 is
incomplete. Some details discussed in ETSI TS 102 221,
section 7.3.1.1.4, clause 4 seem to be not fully implemented. We
may also end up sending a GET RESPONSE in other APDU cases than
case 4 (the only case that uses the GET RESPONSE command).

Related: OS#6970
Change-Id: I26f0566af0cdd61dcc97f5f502479dc76adc37cc
This commit is contained in:
Philipp Maier
2026-03-09 16:18:12 +01:00
parent c3edcf7294
commit e5f56dd35f
1 changed files with 41 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

53
pySim/transport/__init__.py
View File

@@ -301,24 +301,53 @@ class LinkBaseTpdu(LinkBase):
prev_tpdu = tpdu
data, sw = self.send_tpdu(tpdu)
log.debug("T0: case #%u TPDU: %s => %s %s", case, tpdu, data or "(no data)", sw or "(no status word)")
# When we have sent the first APDU, the SW may indicate that there are response bytes
# available. There are two SWs commonly used for this 9fxx (sim) and 61xx (usim), where
# xx is the number of response bytes available.
# See also:
# After sending the APDU/TPDU the UICC/eUICC or SIM may response with a status word that indicates that further
# TPDUs have to be sent in order to complete the task.
if sw is not None:
while (sw[0:2] in ['9f', '61', '62', '63']):
# SW1=9F: 3GPP TS 51.011 9.4.1, Responses to commands which are correctly executed
# SW1=61: ISO/IEC 7816-4, Table 5 — General meaning of the interindustry values of SW1-SW2
# SW1=62: ETSI TS 102 221 7.3.1.1.4 Clause 4b): 62xx, 63xx, 9xxx != 9000
tpdu_gr = tpdu[0:2] + 'c00000' + sw[2:4]
prev_tpdu = tpdu_gr
d, sw = self.send_tpdu(tpdu_gr)
data += d
if case == 4 or self.apdu_strict == False:
# In case the APDU is a case #4 APDU, the UICC/eUICC/SIM may indicate that there is response data
# available which has to be retrieved using a GET RESPONSE command TPDU.
#
# ETSI TS 102 221, section 7.3.1.1.4 is very cleare about the fact that the GET RESPONSE mechanism
# shall only apply on case #4 APDUs but unfortunately it is impossible to distinguish between case #3
# and case #4 when the APDU format is not strictly followed. In order to be able to detect case #4
# correctly the Le byte (usually 0x00) must be present, is often forgotten. To avoid problems with
# legacy scripts that use raw APDU strings, we will still loosely apply GET RESPONSE based on what
# the status word indicates. Unless the user explicitly enables the strict mode (set apdu_strict true)
while True:
if sw in ['9000', '9100']:
# A status word of 9000 (or 9100 in case there is pending data from a proactive SIM command)
# indicates that either no response data was returnd or all response data has been retrieved
# successfully. We may discontinue the processing at this point.
break;
if sw[0:2] in ['61', '9f']:
# A status word of 61xx or 9fxx indicates that there is (still) response data available. We
# send a GET RESPONSE command with the length value indicated in the second byte of the status
# word. (see also ETSI TS 102 221, section 7.3.1.1.4, clause 4a and 3GPP TS 51.011 9.4.1 and
# ISO/IEC 7816-4, Table 5)
le_gr = sw[2:4]
elif sw[0:2] in ['62', '63']:
# There are corner cases (status word is 62xx or 63xx) where the UICC/eUICC/SIM asks us
# to send a dummy GET RESPONSE command. We send a GET RESPONSE command with a length of 0.
# (see also ETSI TS 102 221, section 7.3.1.1.4, clause 4b and ETSI TS 151 011, section 9.4.1)
le_gr = '00'
else:
# A status word other then the ones covered by the above logic may indicate an error. In this
# case we will discontinue the processing as well.
# (see also ETSI TS 102 221, section 7.3.1.1.4, clause 4c)
break
tpdu_gr = tpdu[0:2] + 'c00000' + le_gr
prev_tpdu = tpdu_gr
data_gr, sw = self.send_tpdu(tpdu_gr)
log.debug("T0: GET RESPONSE TPDU: %s => %s %s", tpdu_gr, data_gr or "(no data)", sw or "(no status word)")
data += data_gr
if sw[0:2] == '6c':
# SW1=6C: ETSI TS 102 221 Table 7.1: Procedure byte coding
tpdu_gr = prev_tpdu[0:8] + sw[2:4]
data, sw = self.send_tpdu(tpdu_gr)
log.debug("T0: repated case #%u TPDU: %s => %s %s", case, tpdu_gr, data or "(no data)", sw or "(no status word)")
return data, sw