We currently have the test data for pySim-trace in pysim-testdata.
This means we mix the test data with the data from our original
pySim integration tests. This is very confusing. Let's put the
test data and the testcase for pySim-trace into a dedicated
sub directory.
Change-Id: I565b4268a05c1a1334b5e7d3fbcd9ef2ef0f0c4c
Related: OS#6531
We currently mix the unit-tests with the shell script based integration
tests. Let's put them into a dedicated sub directory.
Related: OS#6531
Change-Id: I0978c5353d0d479a050bbb6e7ae5a63db5e08d24
In the past, we always wrapped a HexAdapter around bytes-like data in
order to make sure it's printed as hex-digits. However, now that we are
doing JSON output it's much easier to let the pySim.utils.JsonEncoder
take care of this in a generic way.
We should do a similar migration all over pySim (pySim-shell,
filesystem, etc.) - but for now only do it in the low-hanging fruit of
pySim-trace aka pySim.apdu
Change-Id: I0cde40b2db08b4db9c10c1ece9ca6fdd42aa9154
This implements the first parts of the "GlobalPlatform Remote
Application Management over HTTP Card Specification v2.3 - Amendment B,
Versoin 1.2". Specifically, this patch covers the TLV definitions for
the OTA message used for HTTPS session triggering.
This also adds some more unit test coverage to pySim.cat, based on
real-world data that was captured nested inside the HTTPS Administration
session triggering parameters.
Change-Id: Ia7d7bd6df41bdf1249011bad9a9a38b7669edc54
the COMPACT-TLV variant is a TLV variant that ISO7816 uses for encoding
tag and length into a single octet. This is used (for example) in ATR
historical bytes.
Let's add support for this to our pySim TLV encoder/decoder.
Change-Id: I9e98d150b97317ae0c6be2366bdaaeaeddf8031c
Let's make sure the constructor of ProfileElement subclasses set
meaningful defaults to the self.decoded member, so that the to_der()
method can actually encode it. This is required when constructing
a profile from scratch, as opposed to loading an existing one from DER.
Also, add a test to verify that the encoder passes without exception;
doesn't test the generated binary data.
Change-Id: I401bca16e58461333733877ec79102a5ae7fe410
So far we only implemented command encoding and response decoding.
Let's also add command decoding, which is useful for example when
decoding protocol traces.
Change-Id: Id666cea8a91a854209f3c19c1f09b512bb493c85
pySim/sms.py:23:0: W0404: Reimport 'Flag' (imported line 23) (reimported)
pySim/sms.py:54:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:60:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:120:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:132:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:137:4: C0103: Method name "toSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:141:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:188:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:192:8: W0612: Unused variable 'flags' (unused-variable)
pySim/sms.py:209:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:228:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:236:4: C0103: Method name "fromSmppSubmit" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:279:4: C0103: Method name "fromBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:306:12: W0107: Unnecessary pass statement (unnecessary-pass)
pySim/sms.py:311:12: W0107: Unnecessary pass statement (unnecessary-pass)
pySim/sms.py:319:4: C0103: Method name "toBytes" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:339:4: C0103: Method name "fromSmpp" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:347:4: C0103: Method name "fromSmppSubmit" doesn't conform to snake_case naming style (invalid-name)
pySim/sms.py:373:4: C0103: Method name "toSmpp" doesn't conform to snake_case naming style (invalid-nam
Change-Id: I8082a01443ef568eebda696239572f0af7b56f1b
In smart cards, we every so often encounter data types that contain a
bit-mask whose length depends on whether or not there are any of the
least-significant bits are set. So far we worked around this with
some kind of Struct('byte1', 'byte2'/COptional, 'byte3'/COptional)
approach.
Let's do thisin a generic way using the new StripTrailerAdapter.
Change-Id: I659aa7247c57c680895b0bf8412f9e477fc3587d
GlobalPlatform requires the use of the KCV for DES + AES keys. Let's
implement that.
(11.8.2.3.3: "For all key types described in section B.6, the Key Check
Value shall be present.")
Change-Id: Ief168a66dee58b56f4126db12829b3a98906c8db
This adds an implementation of the GlobalPlatform SCP03 protocol. It has
been tested in S8 mode for C-MAC, C-ENC, R-MAC and R-ENC with AES using
128, 192 and 256 bit key lengh. Test vectors generated while talking to
a sysmoEUICC1-C2T are included as unit tests.
Change-Id: Ibc35af5474923aed2e3bcb29c8d713b4127a160d
This implementation of GlobalPlatform SCP02 currently only supports
C-MAC and C-ENC, but no R-MAC or R-ENC yet.
The patch also introduces the notion of having a SCP instance associated
with a SimCardCommands instance. It also adds the establish_scp0w and
release_scp shell commands to all GlobalPlatform Security Domains.
Change-Id: I56020382b9dfe8ba0f7c1c9f71eb1a9746bc5a27
Let's simply use the matchingId for filesystem lookup of the UPP file.
This way we can have any number of profiles by simply creating the
respeective files.
Change-Id: I0bc3a14b9fdfcc6322917dd0c69d8295de486950
The DGI encoding is specified in Annex B of the
"GlobalPlatform Systems Scripting Language Specification v1.1.0"
which is an "archived" specification that is no longer published
by GlobalPlatform, despite it being referenced from the GlobalPlatform
Card Specification v2.3, which is the basis of the GSMA eSIM
specifications.
For some reason it was the belief of the specification authors that
yet another format of TLV encoding is needed, in addition to the BER-TLV
and COMPREHENSION-TLV used by the very same specifications.
The encoding of the tag is not really specified anywhere, but I've only
seen 16-bit examples. The encoding of the length is specified and
implemented here accordingly.
Change-Id: Ie29ab7eb39f3165f3d695fcc1f02051338095697
This commit introduces the capability to parse and encode
SimAlliance/TCA "Interoperable Profiles" and apply personalization
operations on them.
Change-Id: I71c252a214a634e1bd6f73472107efe2688ee6d2
This commit introduces
* the osmo-smdpp.py program implementing the main procedures and the
HTTP/REST based ES9+
* python modules for ES8+ and non-volatile RSP Session State storage
* the ASN.1 source files required to parse/encode RSP
* 3GPP test certificates from SGP.26
* an unsigned profile package (UPP) of a SAIP v2.3 TS48 test profile
As I couldn't get the 'Klein' tls support to work, the SM-DP+ code
currently does not support HTTPS/TLS but plan HTTP, so you either have
to modify your LPA to use HTTP instead of HTTPS, or put a TLS proxy in
front.
I have successfully installed an eSIM profile on a test eUICC that
contains certificate/key data within the test CI defined in GSMA SGP.26
Change-Id: I6232847432dc6920cd2bd08c84d7099c29ca1c11
This is the protocol used for the ES8+ interface between SM-DP+ and the
eUICC in the GSMA eSIM system.
Change-Id: Ic461936f2e68e1e6f7faab33d06acf3063e261e7
We cannot fully switch to construct for all of it easily due to
the priority value and the ordering/sorting by priority implemented
in the hand-coded version. But we can at least migrate the
encode/decode of the hnet_pubkey_list via construct.
Change-Id: I4ad5ea57bab37c2dc218e7752d538aa4cdc36ee3
It's customary in the SIM card universe to right-pad data with ff bytes.
So far we only test decoders without such padding, which is unrealistic.
Let's also tests the decoders with extra 'ff' padding present.
For some files this doesn't make sense, so we add a _test_no_pad class
attribute that can be spcified to prevent this new "test with ff-padding"
from being executed for the test data of the class.
Change-Id: I7f5cbb4a6f91040fe9adef9da0a1f30f9f156dae
TS 102 221 Annex A defines three variants of encoding UCS-2 characters
into byte streams in files on UICC cards: One rather simplistic one, and
two variants for optimizing memory utilization on the card.
Let's impelement a construct "Ucs2Adapter" class for this.
Change-Id: Ic8bc8f71079faec1bf0e538dc0dfa21403869c6d
While we do have the _test_de_encode data driven tests for file
definitions, we don't yet have something similar for derived classes of
BER_TLV_IE. This means that TLVs used outside of the filesystem context
(for example, decoding the SELECT/STATUS response, but also eUICC and
other stuff) do not yet have test coverage.
This commit just adds the related test code, but no test data yet.
Related: OS#6317
Change-Id: Ied85f292bb57fde11dc188be84e3384dc3ff1601
on some systems, the output would otherwise contain colored status
words, which in turn mean the test otuput no longer matches the expected
output.
Change-Id: Icb700f6e85a285748e00367a398975aa5e75dec5
There are some pretty intricate rules about how GSM and E-UTRAN are
encoded, let's make sure we fully support both as per 3GPP TS 31.102
Release 17. As part of this, switch to a sorted list of access technologies,
in order to have a defined order. This makes comparing in unit tests
much easier. However, it also means that we need to sort the set
when printing the list of AcT in pySim-read to generate deterministic
output.
Change-Id: I398ac2a2527bd11e9c652e49fa46d6ca8d334b88
Without this the diff between expected and actual output is truncated
and one instead reads the following output:
Diff is 844 characters long. Set self.maxDiff to None to see it.
We actually want to see the full diff to see what's not matching.
Change-Id: I6e89705061454191b6db1255de7fe549ad720800
When we initialize the reader, we currently tell only which type of
interface we are using, but we do not print the reader number or the
device path.
Let's extend the messages so that the path is printed. To prevent
problems with integration-tests, let's also add an environment variable
that we can use to detect when pySim runs inside a integration-test.
Related: OS#6210
Change-Id: Ibe296d51885b1ef5f9c9ecaf1d28da52014dcc4b
At the moment we only verify that no exceptions occurred but the output
is not yet verfied.
Related: OS#6094
Change-Id: I3aaa779b5bd8f30936c284a80dbdcb2b0e06985c
We now have pySim-shell and pySim-trace. Let's give pysim-test.sh a more
distinctive name so that it is clear to which program it refers.
Related: OS#6094
Change-Id: I438f63f9580ebd3c7cc78cc5dab13c9937ac6e3a
pySim-trace has no test coverage yet. Let's use a script to run a
GSAMTAP pcacp through it and check that no exceptions are raised.
Related: OS#6094
Change-Id: Icfabfa7c59968021eef0399991bd05b92467d8d2
As pySim.cdma_ruim was not imported by test_files.py, the unit tests
were apparently never executed and hence didn't pass. Let's fix both
of those problems.
Change-Id: Icdf4621eb68d05a4948ae9efeb81a007d48e1bb7
There are some functions / classes which are only needed by the legacy
tools pySim-{read,prog}, bypassing our modern per-file transcoder
classes. Let's move this code to the pySim/legacy sub-directory,
rendering pySim.legacy.* module names.
The long-term goal is to get rid of those and have all code use the
modern pySim/filesystem classes for reading/decoding/encoding/writing
any kind of data on cards.
Change-Id: Ia8cf831929730c48f90679a83d69049475cc5077
Rather than writing one test class with associated method for each
OTA algorithm / test, let's do this in a data-driven way, where new
test cases just have to provide test data, while the code iterates over
it.
Change-Id: I8789a21fa5a4793bdabd468adc9fee3b6e633c25
