v1.9.2: PPS CLK upshift + exact CLK-edge projection (new reader fixture)

- handle_pps(): flag the first post-PPS character; _read_byte_clk() re-measures
  the CLK period there and accounts the measurement's 16 edges.  The Alcor
  reader upclocks 4.0 -> 4.8 MHz at PPS (FI/DI still 512/32), so the ATR
  measurement was stale: 64 vs 53.33 samples/ETU, no post-PPS APDU framed.
- _wait_clk_rising(): project to the n-th edge (skip to target - half a
  period, take one edge) instead of "skip n-2 cycles + 2 edges", which lost
  ~1 edge per call on fractional periods and slid the samples ~0.5 ETU early
  by the parity bit.  xiaomi 7698 -> 2, 4gmodem 7218 -> 0, S21p_sim2 394 -> 0
  CHKSUM lines (previously misread as dirty-wire noise).
- CONCAT gate: EMBEDDED_CLA excludes the structural 0x4x/0x5x classes (payload
  false hit on the Alcor secured packet); mirrored in tools/vs_reader.py and
  covered by a new vector in tests/test_gsmtap.py.
- tools/capture_baseline.sh: add the alcor_reader_sample fixture; baseline
  regenerated (APDU counts and RESULT: OK unchanged everywhere, 0 CONCAT).
- 75/75 unit tests.  README/AGENTS updated.

tools/capture_baseline.sh

@@ -79,6 +79,13 @@ run_test "xiaomi_mi_a1_coldboot" timeout 300 sigrok-cli -i examples/xiaomi_mi_a1
 # 4gmodem_coldboot_sample — same pre-power-up capture shape, modem SIM.
 run_test "4gmodem_coldboot" timeout 300 sigrok-cli -i examples/4gmodem_coldboot_sample.sr -P iso7816:clk=CLK:data=DATA:rst=RST:vcc=VCC:clock_option=native:protocol=T=0:rst_detect=true:vcc_detect=true:gsmtap_enable=false:pcap_file=/tmp/out.pcap -A iso7816
 
+# alcor_reader_sample — PC/SC reader (Alcor).  Regression fixture for the PPS
+# clock upshift: CLK is 4.0 MHz at the ATR but 4.8 MHz after PPS (FI/DI
+# 512/32 -> 16 CLK/bit = 3.333 samples/CLK at 16 MHz), so the samples-per-clock
+# measured at the ATR goes stale; the first post-PPS character must re-measure
+# it or no post-PPS APDU frames.
+run_test "alcor_reader_sample" timeout 300 sigrok-cli -i examples/alcor_reader_sample.sr -P iso7816:clk=CLK:data=DATA:rst=RST:vcc=VCC:clock_option=native:rst_detect=true:gsmtap_enable=false:pcap_file=/tmp/out.pcap -A iso7816
+
 # samsung_A55_coldboot_new_cable — Samsung A55 with the new short cable
 # (30 mm wires, external pull resistors GND->VCC and VCC->DATA), named
 # channels DATA/VCC/RST/CLK on bits 0/2/4/5.