diff --git a/AGENTS.md b/AGENTS.md
index 7f6548d..29534dd 100644
--- a/AGENTS.md
+++ b/AGENTS.md
@@ -367,7 +367,7 @@ The PPS exchange was previously emitted as a single packet under sub_type
 concatenated — a deviation from libosmocore's gsmtap.h.  It is now split
 into the two standard subtypes: 0x02 (`PPS_REQ`, raw request bytes, span
 `ss..es_req`) and 0x03 (`PPS_RSP`, raw response bytes, span
-`es_req..end`).  Wireshark now dissects both halves, and simtrace2-pysniff
+`es_req..end`).  Wireshark now dissects both halves, and SIMtrace Analyser
 needs no change: its pcap importer already maps 0x03 to `pps` and
 `_decode_pps()` parses any 0xFF-leading frame (the response frame also
 starts with 0xFF).  The PPS annotation and stderr log lines are unchanged.
diff --git a/README.md b/README.md
index 3acbf28..ad9337d 100644
--- a/README.md
+++ b/README.md
@@ -8,10 +8,10 @@ behave like a SIMtrace2 sniffer:
 SIM card ⇄ reader (passive tap on the contacts)
     → FX2 logic analyzer (fx2lafw, 8ch, 24MHz max)
     → sigrok-cli + iso7816 decoder
-    → GSMTAP UDP :4729  →  [simtrace2-pysniff](https://github.com/anttro/simtrace2-pysniff) / Wireshark
+    → GSMTAP UDP :4729  →  [SIMtrace Analyser](https://github.com/anttro/simtrace-analyser) / Wireshark
 ```
 
-[simtrace2-pysniff](https://github.com/anttro/simtrace2-pysniff) is the
+[SIMtrace Analyser](https://github.com/anttro/simtrace-analyser) is the
 recommended tool for visualising live traces and viewing saved captures —
 it can also import/export GSMTAP pcap files (including the PCAP written by
 this decoder's `pcap_file=<path>` option).
@@ -398,7 +398,7 @@ Verified against the upstream example captures:
 # ATR+PPS+54 APDUs from the test_8 reader capture (~19s decode)
 # GSMTAP stream verified with tshark (ATR/APDU dissected natively),
 # custom 0x10/0x11 events verified with a UDP listener, and end-to-end
-# into simtrace2-pysniff server (POST /api/capture/start → decode → stop).
+# into the SIMtrace Analyser server (POST /api/capture/start → decode → stop).
 ```
 
 A synthetic VCD generator covering RST/VCC edge cases lives in the project
diff --git a/README_RUS.md b/README_RUS.md
index 26383ff..b74a485 100644
--- a/README_RUS.md
+++ b/README_RUS.md
@@ -10,10 +10,10 @@ Saleae) ведёт себя как сниффер SIMtrace2:
 SIM-карта ⇄ ридер (пассивный съём с контактов)
     → логический анализатор FX2 (fx2lafw, 8 каналов, до 24 МГц)
     → sigrok-cli + декодер iso7816
-    → GSMTAP UDP :4729  →  [simtrace2-pysniff](https://github.com/anttro/simtrace2-pysniff) / Wireshark
+    → GSMTAP UDP :4729  →  [SIMtrace Analyser](https://github.com/anttro/simtrace-analyser) / Wireshark
 ```
 
-[simtrace2-pysniff](https://github.com/anttro/simtrace2-pysniff) —
+[SIMtrace Analyser](https://github.com/anttro/simtrace-analyser) —
 рекомендуемый инструмент для визуализации живых трасс и просмотра
 сохранённых записей; он также умеет импортировать и экспортировать
 GSMTAP pcap-файлы (включая PCAP, который этот декодер пишет через опцию
@@ -418,7 +418,7 @@ start.bat                   rem запись + поток GSMTAP
 # ATR+PPS+54 APDU из записи ридера test_8 (~19 с декодирования)
 # Поток GSMTAP проверен через tshark (ATR/APDU разбираются нативно),
 # кастомные события 0x10/0x11 — через UDP-слушатель, и сквозным путём
-# в сервер simtrace2-pysniff (POST /api/capture/start → decode → stop).
+# в сервер SIMtrace Analyser (POST /api/capture/start → decode → stop).
 ```
 
 Синтетический генератор VCD, покрывающий краевые случаи RST/VCC, живёт в
diff --git a/gsmtap_stream.py b/gsmtap_stream.py
index 32fd034..4a7dacd 100644
--- a/gsmtap_stream.py
+++ b/gsmtap_stream.py
@@ -2,7 +2,7 @@
 ## GSMTAP live streaming for the ISO 7816 decoder.
 ##
 ## Sends decoded events as GSMTAP-SIM UDP packets, compatible with
-## simtrace2-sniff, simtrace2-pysniff and the GSMTAP dissector in
+## simtrace2-sniff, SIMtrace Analyser and the GSMTAP dissector in
 ## Wireshark.
 ##
 ## This program is free software; you can redistribute it and/or modify
diff --git a/start.sh b/start.sh
index 4a3cd16..419f642 100755
--- a/start.sh
+++ b/start.sh
@@ -80,7 +80,7 @@ Options:
   --restart-delay=S Seconds to wait between restarts (default: 2).
   -h, --help        Show this help
 
-GSMTAP stream defaults to 127.0.0.1:4729 (simtrace2-pysniff compatible).
+GSMTAP stream defaults to 127.0.0.1:4729 (SIMtrace Analyser compatible).
 
 Capture runs continuously until Ctrl+C.  stdin is detached from sigrok-cli
 so pressing keys/Enter in the terminal does NOT stop the capture (sigrok's