v1.9.5: T=0 framing — immediate SW, short responses, Le=256

- Decode the first post-header byte as SW1 before the ACK/data decision:
  a case-2 rejection (6A82/6CXX) carries no ACK and used to be read as
  command data, silently consuming the exchange and the next one.
- Short responses (Lr < Le): after the P3-byte read, split the buffer at
  the first plausible SW1 followed by a plausible CLA, replay the tail and
  flag BAD_FCS; previously the SW scan discarded the real SW, merged the
  following exchanges and lost the exchange at EOF.
- P3=0 is Le=256 for an outgoing command: keep the response data (read
  until SW) instead of discarding it, including data bytes equal to INS.
- ~INS ACK: one data byte per ACK via the new helpers; case-4 inline data
  is appended (permissive; ISO 7816-3 §12.2 maps case 4 to GET RESPONSE).
- tests: four TestDecodeStep vectors (immediate SW, short read + split +
  replay, Le=256 data incl. an INS-valued byte); 99/99.
- AGENTS v1.9.5 + T=0 section, README/README_RUS bullets; baseline
  regenerated (xiaomi_mi_a1_coldboot 473 -> 475 APDUs, all else identical);
  compare_baseline: IDENTICAL.

AGENTS.md

@@ -333,6 +333,37 @@ Known limitation: no on-disk fixture reproduces the exact live failure (all
 real captures contain a 372 ATR), so end-to-end proof needs a re-captured
 `.sr` from the failing phone; the unit tests cover the loop-escape logic.
 
+### v1.9.5: T=0 framing — immediate SW, short responses, Le=256
+
+The audit's P0 framing fixes, each pinned by a `TestDecodeStep` vector:
+
+- **Immediate SW.**  The first post-header byte is classified as a status
+  word before the ACK/data decision.  ISO 7816-3 §10.3.3 lets the card
+  finish at the first procedure byte; a case-2 rejection (`6A82`, `6CXX`,
+  ...) carries no ACK and used to be read as command data (the exchange
+  and the following one were silently consumed).
+- **Short responses (Lr < Le).**  The ACK path still reads the P3 bytes,
+  but if the next byte is not SW1 the buffer is split at the first
+  plausible SW1 followed by a plausible CLA, the tail is replayed into
+  `_replay`, and the packet is emitted with `BAD_FCS`.  Previously the SW
+  scan discarded the real SW, merged the following exchanges into a
+  clean-looking packet, and at EOF lost the exchange silently.  A short
+  read with no plausible split is emitted flagged and resynced.
+- **P3=0 = Le=256.**  For an outgoing command P3=0 requests 256 bytes
+  (§10.3.2).  The response data used to be discarded; it is now read until
+  SW and kept.  The read-until-SW ambiguity on data bytes that look like
+  SW1 remains (inherent to T=0 sniffing).
+- **~INS ACK.**  One data byte per ACK (Table 11) via the new
+  `_t0_read_response_data()` helper, instead of "all remaining".
+- **Case 4.**  ISO 7816-3 §12.2/Table 14 map case 4 to a separate GET
+  RESPONSE; the ACK path now appends any inline data instead of dropping
+  it (permissive extension; conforming cards send SW/61XY there).
+
+Validation: 99/99 unit tests; the 10-trace suite is unchanged except
+`xiaomi_mi_a1_coldboot` 473 -> 475 APDUs (two previously lost exchanges
+recovered), 0 CHKSUM/CONCAT/BAD_FCS/GARBAGE, `RESULT: OK`; all other traces
+identical; `compare_baseline.sh` reports IDENTICAL.  VERSION -> 1.9.5.
+
 ### v1.9.4: decode_step/hunt unit coverage + hunt EOF guard
 
 The v1.9.3 review's residual risk -- the new acceptance classes were only
@@ -883,7 +914,7 @@ append the measured CLK frequency when known
 
 ### Versioning
 
-The decoder version is defined in `pd.py` as `VERSION = '1.9.4'`.
+The decoder version is defined in `pd.py` as `VERSION = '1.9.5'`.
 The version is printed to the log on decoder startup.
 
 ### Testing after decoder changes
@@ -1064,23 +1095,34 @@ no `0xff`/`0xfc` garbage.
 
 Commands that carry command-data (e.g. `80 12 … d0`, P3=208) send those
 P3 bytes on the wire **before** the card's first procedure byte.  The
-framing now distinguishes the cases by the card's first procedure byte:
+framing classifies the first post-header byte in this order (v1.9.5):
 
-- If the first post-header byte **is the ACK (== INS)** → case 2/4: the
-  terminal sent no command data; read `P3` response bytes (+SW).
-- Otherwise the byte is terminal command data → case 3/4: read `P3`
+- **SW1** (`0x61-0x6F`/`0x90-0x9F`) → the card finished with SW1 SW2 at the
+  first procedure byte (ISO 7816-3 §10.3.3; a case-2 rejection such as
+  `6A82`/`6CXX` carries no ACK).
+- **ACK (== INS)** → case 2/4: the terminal sent no command data.  Read the
+  `P3` response bytes, then the SW.  `P3=0` is Le=256 (§10.3.2): read the
+  response data until the SW.  If the card returns **fewer** bytes than Le
+  (`6282` end of file), the buffer is split at the first plausible SW1
+  followed by a plausible CLA, the tail is replayed and the packet is
+  flagged BAD_FCS (v1.9.5; previously the SW scan discarded the real SW and
+  the following exchanges could be merged silently).
+- **~INS** → byte-by-byte transfer: one data byte per ACK, read until SW.
+- Otherwise → case 3/4: the byte is terminal command data; read `P3`
   command-data bytes, then the card's procedure byte (ACK/SW/`9E`/`9F`).
-  On ACK (case 4) the response is read `P3` response bytes (+SW).
+  On ACK, append any inline response data until SW (ISO 7816-3 §12.2 maps
+  case 4 to a separate GET RESPONSE, so conforming cards send SW/61XY
+  here; the append is a permissive extension).
 
 This consolidates case-3/4 exchanges (e.g. the `80 12`/`80 14` STK envelope
 commands) into one C-APDU = header + command data, R-APDU = response + SW
-APDU, instead of fragmenting them across frames.  It is gated to
-`_edge_read` (mid-session / gated-CLK captures) so ATR-based captures
-(`test_8` / `test_7`) keep the original framing unchanged and stay at
-0 garbage.
+APDU, instead of fragmenting them across frames.
 
-All paths use P3-bounded reads (v1.1.1 reverted the read-until-SW
-experiment from v1.1.0 which mis-identified FCP `0x62` as SW1).
+P3-bounded reads are kept for case 2 (`Lr == Le`): the read-until-SW
+experiment from v1.1.0 mis-identified FCP `0x62` as SW1 and was reverted.
+Where the length is unknown (P3=0, case-4 inline data) the read-until-SW
+ambiguity remains — a data byte that looks like SW1 is indistinguishable
+on the wire.
 
 ## Decoder methods tried — reliability registry
 
@@ -1137,11 +1179,12 @@ discarded ideas.  "Proven" = kept in `pd.py`; "Rejected" = do not re-add.
   ATR/PPS/DATA + mid-session.  Reliable; current architecture.
 - **`hasT0`/`hasT1` guards + init.** Prevents `AttributeError` and skips byte
   reading until a protocol is known.  Reliable.
-- **T=0 case-3/4 ACK==INS discriminator.** First post-header byte == INS ⇒
-  case 2/4 (response bounded by `P3`); else command data (read `P3`, then
-  the procedure byte).  Reliable for consolidating STK envelope commands.
-  Gated to `_edge_read`.  P3-bounded reads avoid FCP tag misidentification
-  (v1.1.1 reverted read-until-SW from v1.1.0).
+- **T=0 procedure-byte classification (v1.9.5).** The first post-header
+  byte is SW1 ⇒ immediate status word; ACK (== INS) ⇒ case 2/4 (P3
+  response bytes, short-read split + BAD_FCS); ~INS ⇒ one byte per ACK;
+  else command data (case 3/4).  Reliable for consolidating STK envelope
+  commands.  P3-bounded reads avoid FCP tag misidentification (v1.1.1
+  reverted read-until-SW from v1.1.0).
 - **1.5-ETU start-bit guard in `wait_data_falling`.** `min_high = 1.5 *
   bit_samples` distinguishes genuine inter-byte idle gaps (≥2 ETU per ISO
   7816-3) from intra-byte HIGH periods (≤1 ETU).  Prevents byte misalignment

README.md

@@ -230,6 +230,12 @@ filtered from stderr.
   recovering the real command.  Every consumed-but-unemitted byte is
   explicitly logged (`discarded byte 0x…: reason`); idle 0x00/0xFF discards
   are rate-limited, non-idle discards always produce a decoder annotation.
+- A card may finish a command with SW1 SW2 at the first procedure byte
+  (ISO 7816-3 §10.3.3), including a case-2 command with P3 > 0: the SW is
+  framed as the status word, not read as command data.  A response
+  **shorter than Le** is split at the status word and the packet is
+  flagged `BAD_FCS` (the following exchanges stay intact), and `P3=0`
+  (Le=256) response data is kept.
 
 Performance: in native CLK mode the decoder calibrates samples per CLK
 edge once from the ATR's first frame, then advances bit timing with

README_RUS.md

@@ -243,6 +243,12 @@ USB у FX2 при длительной высокой частоте дискр
   (`discarded byte 0x…: reason`); отбрасывания холостых 0x00/0xFF
   ограничены по частоте, отбрасывания не-холостых байтов всегда дают
   аннотацию декодера.
+- Карта может завершить команду словами SW1 SW2 на первом процедурном
+  байте (ISO 7816-3 §10.3.3), в том числе для case-2 команды с P3 > 0:
+  SW оформляется как статусное слово, а не читается как данные.  Ответ
+  **короче Le** разделяется по статусному слову и пакет помечается
+  `BAD_FCS` (следующие обмены сохраняются); данные ответа при `P3=0`
+  (Le=256) сохраняются.
 
 Производительность: в режиме native CLK декодер один раз калибрует число
 отсчётов на фронт CLK по первому кадру ATR, а затем продвигает битовую

pd.py

@@ -28,7 +28,7 @@ from .gsmtap_stream import (GsmtapStreamSender,
     GSMTAP_SIM_RST_EVENT, GSMTAP_SIM_VCC_EVENT,
     GSMTAP_FLAG_BAD_FCS)
 
-VERSION = '1.9.4'
+VERSION = '1.9.5'
 
 
 
@@ -2177,6 +2177,69 @@ class Decoder(srd.Decoder):
             return False
         return True
 
+    def _t0_read_data_until_sw(self, packet):
+        '''Append every card byte until SW1 SW2, keeping the data.
+
+        Used after an INS ACK ("all remaining data follows", ISO 7816-3
+        Table 11) and for P3=0 / case-4 response data: from this point on
+        the card sends data bytes, then the status word.  A plausible SW1
+        ends the response; data bytes are appended verbatim.  Returns True
+        when the status word was read.'''
+        for _ in range(MAX_TPDU_LEN):
+            pb = self.read_byte()
+            if pb is None:
+                return False
+            if plausible_sw(pb):
+                sw2 = self.read_byte()
+                if sw2 is None:
+                    return False
+                packet.extend((pb, sw2))
+                return True
+            packet.append(pb)
+        return False
+
+
+    def _t0_read_response_data(self, packet, ins):
+        '''Append the card's T=0 response data bytes until SW1 SW2.
+
+        Used for the per-byte (~INS) ACK form, where every data byte is
+        followed by another procedure byte.  Procedure bytes are consumed
+        and never stored: NULL 0x60 / turnaround 0xFF are skipped, ~INS
+        means "the next data byte only", and the deprecated INS^0x01 forms
+        consume one data byte.  An INS ACK ("all remaining data follows")
+        switches to _t0_read_data_until_sw().  Any other byte is response
+        data.  Returns True when the status word was read.'''
+        for _ in range(MAX_TPDU_LEN):
+            pb = self.read_byte()
+            if pb is None:
+                return False
+            if pb in (0x60, 0xFF):
+                self._note_pre_sw(pb, 'NULL/turnaround before response data')
+                continue
+            if pb == ins:
+                return self._t0_read_data_until_sw(packet)
+            if pb == (ins ^ 0xFF):
+                d = self.read_byte()
+                if d is None:
+                    return False
+                packet.append(d)
+                continue
+            if pb == (ins ^ 0x01) or pb == ((ins ^ 0xFF) ^ 0x01):
+                d = self.read_byte()
+                if d is None:
+                    return False
+                packet.append(d)
+                continue
+            if plausible_sw(pb):
+                sw2 = self.read_byte()
+                if sw2 is None:
+                    return False
+                packet.extend((pb, sw2))
+                return True
+            packet.append(pb)
+        return False
+
+
     def decode_step(self):
         '''Run one state-machine step. Returns False when decoding ends.'''
         if self._at_eof():
@@ -2238,6 +2301,7 @@ class Decoder(srd.Decoder):
             self.handle_atr(self.wait({'skip': 0}))
         elif self.state == 'DATA':
             packet = [];
+            forced_bad = False
 
             # Mid-session capture with an explicit protocol: there is no ATR to
             # derive the bit period from, so recover it once from the live line
@@ -2432,66 +2496,100 @@ class Decoder(srd.Decoder):
                         pb0 = self.read_byte()
                         if pb0 is None:
                             return True
-                    if (pb0 == bIns or pb0 == (bIns ^ 0xFF)):
-                        # ACK (full match or ~INS): case 2/4 (response data
-                        # follows).  Read exactly P3 response bytes, then
-                        # scan for SW1 SW2, skipping any turnaround idle
-                        # bytes (e.g. 0xFF) between data and SW.
+                    if plausible_sw(pb0):
+                        # Immediate status word: ISO 7816-3 §10.3.3 lets the
+                        # card finish the command at the first procedure
+                        # byte; a case-2 rejection ('6A82', '6CXX', ...)
+                        # carries no ACK and must not be read as data.
+                        sw2 = self.read_byte()
+                        if sw2 is None:
+                            return True
+                        packet.append(pb0)
+                        packet.append(sw2)
+                        got_sw = True
+                    elif pb0 == bIns:
+                        if (p3 == 0):
+                            # P3=0 in an outgoing command is Le=256
+                            # (ISO 7816-3 §10.3.2): the card ACKs and sends
+                            # response data until the status word.
+                            if self._t0_read_data_until_sw(packet):
+                                got_sw = True
+                        else:
+                            # ACK: read the P3 response bytes, then the SW.
+                            # The card may return FEWER bytes than Le
+                            # (6282 end-of-file; Lr <= Le, TS 102 221
+                            # §10.1.6): if the byte after the read is not
+                            # SW1, split the buffer at the first plausible
+                            # SW1 followed by a plausible CLA and replay the
+                            # tail (flagged BAD_FCS).
+                            resp = []
+                            eof = False
                             for _ in range(p3):
                                 b = self.read_byte()
                                 if b is None:
-                                return True
-                            packet.append(b)
-                        sw1 = None
-                        for _ in range(MAX_TPDU_LEN):
-                            sw1 = self.read_byte()
-                            if sw1 is None:
-                                return True
-                            if plausible_sw(sw1):
+                                    eof = True
                                     break
-                            self._note_pre_sw(
-                                sw1, 'non-SW byte before status word '
-                                     '(P3-bounded response)')
-                        if sw1 is None:
-                            return True
+                                resp.append(b)
+                            s1 = None if eof else self.read_byte()
+                            if s1 is None:
+                                eof = True
+                            while s1 in (0x60, 0xFF):
+                                s1 = self.read_byte()
+                                if s1 is None:
+                                    eof = True
+                                    break
+                            if s1 is not None and plausible_sw(s1):
                                 sw2 = self.read_byte()
                                 if sw2 is None:
                                     return True
-                        packet.append(sw1)  # SW1
-                        packet.append(sw2)  # SW2
+                                packet.extend(resp)
+                                packet.extend((s1, sw2))
                                 got_sw = True
                             else:
-                        # Case 2/3/4: determine data direction from P3 and
-                        # the first post-header byte.
+                                buf = resp + ([s1] if s1 is not None else [])
+                                split = None
+                                for j in range(len(buf) - 1):
+                                    if not plausible_sw(buf[j]):
+                                        continue
+                                    k = j + 2
+                                    if k >= len(buf) or plausible_cla(buf[k]):
+                                        split = j
+                                        break
+                                if split is not None:
+                                    packet.extend(buf[:split])
+                                    packet.extend(buf[split:split + 2])
+                                    for t in reversed(buf[split + 2:]):
+                                        self._replay.appendleft(t)
+                                    got_sw = True
+                                    forced_bad = True
+                                    self.log(
+                                        "SHORT RESPONSE: split %d data byte(s) "
+                                        "before SW1 0x%02x (Le %d)"
+                                        % (split, buf[split], p3))
+                                else:
+                                    packet.extend(buf)
+                                    forced_bad = True
+                                    self._resync = True
+                                    self.log(
+                                        "SHORT RESPONSE: no status word in "
+                                        "%d byte(s) read for Le %d"
+                                        % (len(buf), p3))
+                    elif pb0 == (bIns ^ 0xFF):
+                        # ~INS ACK: one data byte at a time.  Read data
+                        # until the SW, consuming the procedure bytes in
+                        # between (ISO 7816-3 Table 11).
+                        if self._t0_read_response_data(packet, bIns):
+                            got_sw = True
+                    else:
+                        # Case 3/4: the first post-header byte is command
+                        # data (P3 = Lc).
                         packet.append(pb0)
                         if (p3 == 0):
-                            # P3=0 (Le=0): no command data.  Card sends
-                            # response data + SW, or SW directly (no ACK).
-                            if plausible_sw(pb0):
-                                # pb0 is SW1: card sent SW directly.
-                                sw2 = self.read_byte()
-                                if sw2 is None:
-                                    return True
-                                packet.append(sw2)
+                            # P3=0 and no procedure byte: treat the byte as
+                            # response data (Le=256, permissive) and read
+                            # until the status word.
+                            if self._t0_read_data_until_sw(packet):
                                 got_sw = True
-                            else:
-                                # pb0 is response data: read until SW,
-                                # skipping turnaround idle bytes.
-                                for _ in range(MAX_TPDU_LEN):
-                                    b = self.read_byte()
-                                    if b is None:
-                                        return True
-                                    if plausible_sw(b):
-                                        sw2 = self.read_byte()
-                                        if sw2 is None:
-                                            return True
-                                        packet.append(b)
-                                        packet.append(sw2)
-                                        got_sw = True
-                                        break
-                                    self._note_pre_sw(b,
-                                                      'non-SW byte in P3=0 '
-                                                      'response')
                         else:
                             # Case 3/4: P3 command-data bytes, then
                             # procedure byte.
@@ -2505,23 +2603,15 @@ class Decoder(srd.Decoder):
                                 if pb is None:
                                     return True
                                 if (pb == bIns or pb == (bIns ^ 0xFF)):
-                                    # ACK (full match / ~INS): case 4 -> read response until SW,
-                                    # skipping turnaround idle bytes.
-                                    for _ in range(MAX_TPDU_LEN):
-                                        b = self.read_byte()
-                                        if b is None:
-                                            return True
-                                        if plausible_sw(b):
-                                            sw2 = self.read_byte()
-                                            if sw2 is None:
-                                                return True
-                                            packet.append(b)
-                                            packet.append(sw2)
+                                    # ACK: case-4 response data follows.
+                                    # Append it until the status word (it
+                                    # used to be discarded).  INS means all
+                                    # remaining data; ~INS is per byte.
+                                    if pb == bIns:
+                                        if self._t0_read_data_until_sw(packet):
+                                            got_sw = True
+                                    elif self._t0_read_response_data(packet, bIns):
                                         got_sw = True
-                                            break
-                                        self._note_pre_sw(b,
-                                                          'non-SW byte in case-4 '
-                                                          'response')
                                     break
                                 elif (pb == (bIns ^ 0x01)
                                         or pb == ((bIns ^ 0xFF) ^ 0x01)):
@@ -2697,7 +2787,8 @@ class Decoder(srd.Decoder):
                     else:
                         self._idle_low = 0
                         self.emit_packet(GSMTAP_SIM_APDU, bytes(packet),
-                                         es, self.samplenum)
+                                         es, self.samplenum,
+                                         flags=GSMTAP_FLAG_BAD_FCS if forced_bad else 0)
 
             self.log("PACKETEND", codecs.encode(bytes(packet), 'hex'))
         else:

tests/baseline.txt

@@ -1,7 +1,7 @@
-=== Baseline captured 2026-10-18T02:13:20+03:00 ===
+=== Baseline captured 2026-10-20T16:56:58+03:00 ===
 
 === test_8 ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('etu recovered (samples):', 1237)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -36,7 +36,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === test_7 ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('etu recovered (samples):', 1236)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -77,7 +77,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === xiaomi_phone_sample ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('etu recovered (samples):', 53)
 (11674007, 'CHKSUM ERROR: ', 0, 'bits: ', [0, 0, 0, 1, 0, 0, 1, 1, 1, 1])
 iso7816-1: CHKSUM ERROR bits=[0, 0, 0, 1, 0, 0, 1, 1, 1, 1]
@@ -102,7 +102,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === xiaomi_mi_a1_coldboot ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -112,12 +112,12 @@ CHKSUM ERROR count: 0
 CONCAT APDU count: 0
 reader exchanges         : 0
 capture ATRs             : 1
-capture APDUs            : 473
+capture APDUs            : 475
 byte-exact matches (LCS) : 0
 reader exchanges not in capture (pre-capture / dropped): 0
 capture APDUs not in reader log:
   - proactive/CAT (unlogged by reader SDK): 10
-  - valid exchanges (reader retries/dupes): 463
+  - valid exchanges (reader retries/dupes): 465
   - GARBAGE (mis-framed/desync): 0
 
 Degradation metrics:
@@ -129,7 +129,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === 4gmodem_coldboot ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -156,7 +156,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === alcor_reader_sample ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -189,7 +189,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === samsung_A55_coldboot_new_cable ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -216,7 +216,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === samsung_A55_coldboot_new_cable_sim2 ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -243,7 +243,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === samsung_S21p_coldboot_new_cable ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -270,7 +270,7 @@ Degradation metrics:
 RESULT: OK - capture fully explained (reader + CAT + valid retries)
 
 === samsung_S21p_coldboot_new_cable_sim2 ===
-('=== iso7816 decoder v1.9.4 ===',)
+('=== iso7816 decoder v1.9.5 ===',)
 ('RST low at start: expecting cold-boot ATR',)
 iso7816-1: RST deasserted
 ('RST deasserted',)
@@ -359,7 +359,11 @@ test_bit_dense_valid_cla_is_not_idle_noise (__main__.TestDecodeStep.test_bit_den
 test_ex_class_exchange_frames (__main__.TestDecodeStep.test_ex_class_exchange_frames) ... ok
 test_extended_channel_exchange_frames (__main__.TestDecodeStep.test_extended_channel_exchange_frames) ... ok
 test_idle_noise_still_discarded (__main__.TestDecodeStep.test_idle_noise_still_discarded) ... ok
+test_immediate_sw_rejection_frames (__main__.TestDecodeStep.test_immediate_sw_rejection_frames) ... ok
 test_invalid_ins_re_frame_recovers_command (__main__.TestDecodeStep.test_invalid_ins_re_frame_recovers_command) ... ok
+test_le_256_response_data_is_kept (__main__.TestDecodeStep.test_le_256_response_data_is_kept) ... ok
+test_short_response_is_split_and_flagged (__main__.TestDecodeStep.test_short_response_is_split_and_flagged) ... ok
+test_short_response_replays_following_exchange (__main__.TestDecodeStep.test_short_response_replays_following_exchange) ... ok
 test_text_byte_boundary_is_discarded_not_framed (__main__.TestDecodeStep.test_text_byte_boundary_is_discarded_not_framed) ... ok
 test_glitch_low_pulse_removed (__main__.TestDeglitchEdges.test_glitch_low_pulse_removed) ... ok
 test_no_edges (__main__.TestDeglitchEdges.test_no_edges) ... ok
@@ -435,6 +439,6 @@ test_valid_ins_odd_variants (__main__.TestValidateT0Apdu.test_valid_ins_odd_vari
 test_vs_reader_mirror (__main__.TestValidateT0Apdu.test_vs_reader_mirror) ... ok
 
 ----------------------------------------------------------------------
-Ran 95 tests in 0.028s
+Ran 99 tests in 0.032s
 
 OK

tests/test_gsmtap.py

@@ -880,6 +880,52 @@ class TestDecodeStep(unittest.TestCase):
         self.assertEqual(inst.discarded[0][0], 0xfe)
         self.assertIn('idle-line noise', inst.discarded[0][1])
 
+    def test_immediate_sw_rejection_frames(self):
+        # A command rejected with SW1 SW2 instead of an ACK (ISO 7816-3
+        # §10.3.3) must not be read as command data; the exchange and the
+        # following one must frame separately.
+        inst = self._make(bytes.fromhex('00b00000106a82' +
+                                        '00a40004009000'))
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted,
+                         [(bytes.fromhex('00b00000106a82'), 0)])
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted[1],
+                         (bytes.fromhex('00a40004009000'), 0))
+
+    def test_short_response_is_split_and_flagged(self):
+        # Lr < Le (6282 end-of-file): the SW inside the P3-byte read ends
+        # the response, and the packet is flagged BAD_FCS (it used to be a
+        # silent total loss).
+        inst = self._make(bytes.fromhex('00b0000010b012349000'))
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted,
+                         [(bytes.fromhex('00b000001012349000'),
+                           self.gs.GSMTAP_FLAG_BAD_FCS)])
+
+    def test_short_response_replays_following_exchange(self):
+        # A short response followed by another command: the split must
+        # replay the tail so the next exchange is framed intact.
+        inst = self._make(bytes.fromhex('00b0000010b012349000' +
+                                        '00a40004009000'))
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted[0],
+                         (bytes.fromhex('00b000001012349000'),
+                          self.gs.GSMTAP_FLAG_BAD_FCS))
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted[1],
+                         (bytes.fromhex('00a40004009000'), 0))
+
+    def test_le_256_response_data_is_kept(self):
+        # P3=0 in an outgoing command is Le=256 (ISO 7816-3 §10.3.2): the
+        # data after the ACK must be appended, not discarded — including a
+        # data byte that happens to equal INS.
+        payload = 'a5' * 8 + 'b0' + 'a5' * 7
+        inst = self._make(bytes.fromhex('00b0000000b0' + payload + '9000'))
+        self.assertTrue(inst.decode_step())
+        self.assertEqual(inst.emitted,
+                         [(bytes.fromhex('00b0000000' + payload + '9000'), 0)])
+
 
 class TestAtrHuntDetect(unittest.TestCase):
     """The ATR-hunt command-detect handoff in handle_atr(), driven by a