- pd.py/AGENTS: the rejected '8X' range now reads 0x81-0x83/0x85-0x8F
(0x84 stays accepted); the 0x40-0x4F vs 0x50-0x5F citations are split
(chaining is ISO-only, TS 102 221 keeps b5=0); the bit-dense CLA list
gains 0xE7 (exact set verified).
- README_RUS.md: the invalid-INS note mirrored (the removed odd-LSB rule,
citation corrected to 5.1.2).
- tests: test_vs_reader_mirror (pd.py <-> tools/vs_reader.py drift guard),
test_odd_ins_set_pinned, the 0xE7 noise vector, and the 'EX' vector now
uses STATUS (e2 f2) as TS 102 221 Table 10.5 defines.
- tests/baseline.txt regenerated (test listing only); compare_baseline:
IDENTICAL.
- handle_pps(): flag the first post-PPS character; _read_byte_clk() re-measures
the CLK period there and accounts the measurement's 16 edges. The Alcor
reader upclocks 4.0 -> 4.8 MHz at PPS (FI/DI still 512/32), so the ATR
measurement was stale: 64 vs 53.33 samples/ETU, no post-PPS APDU framed.
- _wait_clk_rising(): project to the n-th edge (skip to target - half a
period, take one edge) instead of "skip n-2 cycles + 2 edges", which lost
~1 edge per call on fractional periods and slid the samples ~0.5 ETU early
by the parity bit. xiaomi 7698 -> 2, 4gmodem 7218 -> 0, S21p_sim2 394 -> 0
CHKSUM lines (previously misread as dirty-wire noise).
- CONCAT gate: EMBEDDED_CLA excludes the structural 0x4x/0x5x classes (payload
false hit on the Alcor secured packet); mirrored in tools/vs_reader.py and
covered by a new vector in tests/test_gsmtap.py.
- tools/capture_baseline.sh: add the alcor_reader_sample fixture; baseline
regenerated (APDU counts and RESULT: OK unchanged everywhere, 0 CONCAT).
- 75/75 unit tests. README/AGENTS updated.
v1.9.0 -- CLK frequency in RST events:
- RST events (sub_type 0x10) append the measured CLK frequency when known:
[direction, level, flags, clk_hz_be32], flags bit 0 = rate present; the
3-byte form is kept when the rate is not yet measured. Value is
samplerate / _samples_per_clock from the existing 16-edge measurement (PPS
changes F/D, not the CLK rate). VCC events unchanged. Backward
compatible (old consumers read the first two bytes only); consumers can
compute data_rate = clk_hz x D / F from the ATR/PPS Fi/Di.
- Unit tests for the payload codec; README/README_RUS/AGENTS updated.
v1.9.1 -- T=0 NULL is not an SW1:
- The 'scan for SW1' loops accepted any 0x6X byte, including the NULL
procedure byte 0x60 (card busy), so 'NULL + real SW1' was mis-framed as
the status word: the phone traces' SELECT MF came out as ...3f00 6061 —
real SW1 0x61 eaten as SW2, real SW2 0x29 left on the wire and discarded
as a suspicious CLA (desync cascade).
- plausible_sw() now accepts 0x61-0x6F and 0x90-0x9F only, per
ISO 7816-3:2006 10.3.3 Table 11 ('6X' or '9X', EXCEPT '60'; ISO 7816-4
enforces '60' as an invalid SW1) and UICC_SPECS.md 1.8. All seven
SW1-detection sites use plausible_sw(); NULLs met while scanning are
logged as rate-limited wait extensions (_note_pre_sw) instead of
suspicious bytes.
- tools/vs_reader.py::_plausible_sw() mirrors the fix; regression vector
for the 00a40004023f006061 artifact.
Validation: 74/74 unit tests; baseline regenerated and IDENTICAL (the SW
fix is count-neutral -- only the SW bytes change); all 9 example pcaps
regenerated -- vs_reader OK, zero APDUs ending in 60 61, SELECT MF now
61 29 / 61 25.
- pd.py ts_from_samplenum: drop c_uint32 truncation + dead sampleOverflowCount
(pcap timestamps wrapped backwards past ~4.5 min at 16 MHz).
- pd.py handle_atr: guard None reads at EOF (was TypeError (None & 0x80) on a
capture truncated mid-ATR-hunt).
- start.bat: add --protocol (+ :protocol=T=0 default) to match start.sh's
mid-session decode; correct the 'flag-for-flag' header comment.
- start.sh: reject --rst/--vcc assigned to the same pin (was unchecked).
- setup.bat: set DEVICE_MSG on blocked/skipped probe so the trailing
'unknown' message is suppressed.
- vs_reader.py: RESULT now fails on CONCAT / payload mismatch / suspicious
CLA, not just GARBAGE (OK text unchanged; clean traces stay identical).
Residual CONCAT mis-frames (4gmodem/A55_sim2/S21p_sim2) traced to a silent
5-byte drop at an invalid-INS T=0 header (0x0f 00 a4 08 04). Drop only the
stray leading byte and re-frame the remaining four via _replay so the real
command (00 a4 08 04 02 2f 00 -> 61 1c) is recovered.
- _note_discard()/_consume_first(): every consumed-but-unemitted byte is
now logged; idle 0x00/0xFF discards are rate-limited, real data always
gets an ANN_WARN annotation.
- All read-until-SW loops log skipped non-SW bytes.
- All traces: CONCAT 0; BAD_FCS/GARBAGE 0; test_8/test_7 RESULT OK;
47/47 unit tests; baseline byte-identical.
History rewritten to a single root commit so no example trace is stored
in the repo (fixtures are local-only, gitignored). README keeps only
generic <trace>.sr placeholders; AGENTS.md retains the fixture names.
catarrh