v3.23.5: the TERMINAL RESPONSE result list and its spec corrections
The step editor's result select (the expect's respond, the proactive-drain's respond/first) offered five symbolic values with no hex. It now offers the full TS 102 223 v18.3.0 8.12.0 list (00-3F), labelled '<hex> - <alias>' (or '<hex> - <spec name>'), plus a manual hex entry, and an optional additional-information byte for the general result (83 02 <result> <info>, default 00; the 8.12.2 terminal-problem values are suggested through a datalist). The script aliases were corrected to the spec: refused 03->22, not_understood 04->32, modified 06->07, no_response 22->12 - a stored script using one of them now answers with the corrected value; no_response stays accepted for compatibility but is no longer offered by the editor. The server's TR decode tables (_RESULT_NAMES_BASIC/_GENERAL, a GSM 11.14 mix displayed in the proactive log) are replaced by the spec table plus the 8.12.2 additional-information names; the dcs field parses as hex (0A used to be refused and 10 read as decimal 10); the drain summary's 22 label is fixed. The result labels are not translated (spec text); the unused RU keys were removed. Shared fixture frontend/tests/tr_results.json, drift-guarded by both suites. 855 frontend + 838 Python; sw cache simple-v418.
This commit is contained in:
+1
-1
@@ -564,7 +564,7 @@
|
||||
<p class="text-sm mb-2">The pill has <strong>four views</strong>: the <strong>suite list</strong> (default; <em>Add suite</em> / <em>Edit</em> / <em>Run</em> / <em>Export</em> / <em>Delete</em>), the <strong>suite editor</strong> (the suite's scripts in run order — the optional <em>setup</em> first and the <em>teardown</em> last, marked with role badges; per script <em>Run</em>/<em>Edit</em>/<em>Move</em>/<em>Copy</em>/<em>Delete</em>, the per-member <em>on failure</em> policy <em>stop</em> (default) / <em>continue</em>, and <em>ADM required</em>), the <strong>script editor</strong> (the step list; its <em>Start</em> runs that single script and shows the result under the steps — not preserved) and the <strong>suite report</strong> (after a suite run: every script's status, its step table with expected/actual, the failing note and a run-log excerpt; the summary with passed/warnings/failed/skipped, wall time, the SCP80 counters before → after per keyset, the preset and a card-session-changed warning; export as <em>JSON</em> or <em>Markdown</em>). A <strong>suite run</strong> executes its scripts in order in <strong>one card session, without resets and without resume</strong>; <em>on failure</em> decides whether the suite stops at that script or runs the next one, the <strong>teardown always runs</strong> on a stop or a failure (while the card is in the reader) so the next test starts clean, and a card reset stops the suite and is flagged in the report. <strong>Start with card reset</strong> resets the card and runs the full re-initialization before the suite starts (the scripts then run against a freshly initialized card); the preset must still match the card's ICCID afterwards and a required ADM is verified again for the new card session. The initialization consumes the card's initial proactive commands, so a script cannot catch the first command after the reset (they stay in the proactive log). <strong>ADM required</strong> (on the suite or a script) verifies the matched preset's ADM key <strong>once</strong> before the start — a failure refuses the run (verify manually with the ADM badge; nothing is retried automatically). Scripts live in the suite's store (<code class="font-mono text-sm">~/.pysim-simple-server/test_suites.json</code>, <code class="font-mono text-sm">--test-suites</code>); every script belongs to exactly one suite, and a script can be moved or copied to another suite (a bundle export carries the suite plus its scripts; the old script-only export imports into an auto-created “Imported scripts” suite).</p>
|
||||
<ul class="list-disc list-inside text-sm space-y-1 mb-3">
|
||||
<li><strong>Actions</strong> — <em>Envelope</em> (Event Download: raw event type + data, with an optional source override — 82 terminal / 83 network) or <em>Event</em> (the semantic forms: the <strong>same form the Phone tab's send dialog uses</strong>, for every modelled event — the four events the server builds (Location status, Access technology change, Network rejection, Data connection status change) travel as fields it validates and builds at run time, every other event carries the form's built event-data hex (shown live under the form, with the one-ENVELOPE check); the device-identities source comes from the event (e.g. MT call → network) or its source field), <em>Menu Selection</em> (item id 1–255, or the item's text with an exact/contains match, case-insensitive by default — the step editor's <em>Match case</em> choice switches to an exact-case match; the text is resolved against the card's menu, which follows the applet's install parameters), <em>UPDATE/READ file</em> (path + mode; reads verify the file data), <em>raw APDU</em> (no auto-handler), <em>SCP80</em> (C-APDU or a pre-built secured packet, optional keyset number (kvn) / TAR / SPI1 / SPI2 overrides and a command format — compact, or the TS 102 226 §5.2.1 Command Scripting template <em>expanded</em> (AA) / <em>expanded AE 80</em> around the C-APDU; the keys and the counter come from the card preset matched by the equipped card's ICCID — the run names the stored preset, so it always uses its keysets, TARs and counter — the server persists the consumed counter into it as the run proceeds), <em>STATUS</em> (with <em>attempts</em> > 1 it polls until the card announces a command) and <em>Proactive drain</em> (poll STATUS and consume every announced command — the TERMINAL RESPONSE result for each, optionally a different result for the first; the attempt/interval bound; an optional <em>require</em> assertion over what was drained. An empty poll passes, the final STATUS must be idle, and a still-pending command is handed to the next step — use it at the start, in the middle or at the end of a script to make sure the card has stopped sending; it also consumes a command a previous step left pending (a step that answered <code class="font-mono text-sm">91XX</code>). Every action has a response check: expected SW and data (exact, or a mask with <code class="font-mono text-sm">?</code> nibble wildcards — <code class="font-mono text-sm">91??</code>) plus a PoR check for SCP80 (<em>any / no PoR / por_ok</em>, or a custom assertion of the decoded PoR — status / SW / data; the SEND SHORT MESSAGE transport works the same).</li>
|
||||
<li><strong>Expectations</strong> — the card must have announced a proactive command in the previous step (SW <code class="font-mono text-sm">91XX</code>, TS 102 221 §7.4.2.1 / TS 102 223 §6.3); a <code class="font-mono text-sm">9000</code> means “no command”: the step fails at its fail level — Error stops the script, Warning continues (the tolerant “consume a command if there is one” form) — and a STATUS action with <em>attempts</em> > 1 polls when the applet delivers on poll. The command type, qualifier and contents are verified: text / item / raw checks, an <em>Alpha</em> check (the command's Alpha identifier, tag <code class="font-mono text-sm">05</code>/<code class="font-mono text-sm">85</code> — distinct from the <code class="font-mono text-sm">8D</code> text string), an <em>SMS TPDU</em> check (the submit TPDU of a SEND SHORT MESSAGE: destination / PID / DCS / UDL / user data — for an applet's own SMS), a <em>PoR</em> check (a SEND SHORT MESSAGE carries the PoR when the packet requested PoR-in-submit, SPI2 bit <code class="font-mono text-sm">20</code>: the response status, the R-APDU SW and the response data; make sure an SCP80 step ran first — the R-APDU SW lives <em>inside</em> the response payload: an applet's own TAR returns application data, so check its data and leave the SW empty; a refused ENVELOPE (<code class="font-mono text-sm">62XX</code>/<code class="font-mono text-sm">63XX</code>) may carry no response packet at all — leave the PoR check at <em>any</em> or expect <em>no PoR</em> for such a step) and a <em>Files</em> check (the File List of a REFRESH, e.g. qualifier <code class="font-mono text-sm">00</code> = NAA initialization with full file change notification). The scripted <strong>TERMINAL RESPONSE</strong> (result, item identifier, text, extra TLVs) is part of the instruction.</li>
|
||||
<li><strong>Expectations</strong> — the card must have announced a proactive command in the previous step (SW <code class="font-mono text-sm">91XX</code>, TS 102 221 §7.4.2.1 / TS 102 223 §6.3); a <code class="font-mono text-sm">9000</code> means “no command”: the step fails at its fail level — Error stops the script, Warning continues (the tolerant “consume a command if there is one” form) — and a STATUS action with <em>attempts</em> > 1 polls when the applet delivers on poll. The command type, qualifier and contents are verified: text / item / raw checks, an <em>Alpha</em> check (the command's Alpha identifier, tag <code class="font-mono text-sm">05</code>/<code class="font-mono text-sm">85</code> — distinct from the <code class="font-mono text-sm">8D</code> text string), an <em>SMS TPDU</em> check (the submit TPDU of a SEND SHORT MESSAGE: destination / PID / DCS / UDL / user data — for an applet's own SMS), a <em>PoR</em> check (a SEND SHORT MESSAGE carries the PoR when the packet requested PoR-in-submit, SPI2 bit <code class="font-mono text-sm">20</code>: the response status, the R-APDU SW and the response data; make sure an SCP80 step ran first — the R-APDU SW lives <em>inside</em> the response payload: an applet's own TAR returns application data, so check its data and leave the SW empty; a refused ENVELOPE (<code class="font-mono text-sm">62XX</code>/<code class="font-mono text-sm">63XX</code>) may carry no response packet at all — leave the PoR check at <em>any</em> or expect <em>no PoR</em> for such a step) and a <em>Files</em> check (the File List of a REFRESH, e.g. qualifier <code class="font-mono text-sm">00</code> = NAA initialization with full file change notification). The scripted <strong>TERMINAL RESPONSE</strong> is part of the instruction: the <strong>result</strong> offers the full TS 102 223 §8.12.0 list (each entry labelled <code class="font-mono text-sm"><hex> - <alias or name></code>, plus a manual hex entry; the aliases follow the spec — <code class="font-mono text-sm">ok</code> 00, <code class="font-mono text-sm">modified</code> 07, <code class="font-mono text-sm">cancel</code> 10, <code class="font-mono text-sm">timeout</code> 12, <code class="font-mono text-sm">refused</code> 22, <code class="font-mono text-sm">not_understood</code> 32, …), the <strong>additional information</strong> byte of the general result (default <code class="font-mono text-sm">00</code>; the §8.12.2 terminal-problem values are suggested), the item identifier, the text (+DCS) and extra TLVs.</li>
|
||||
<li><strong>Fail levels</strong> — a mismatch flags the step as <em>Error</em> (terminates the script) or <em>Warning</em> (continues); every step failure honours it, including an expectation that finds no pending command and a card error raised during the step (an absent optional file's <code class="font-mono text-sm">6A82</code>); each check is reported with expected vs actual values.</li>
|
||||
<li><strong>Templates</strong> — Empty, <em>STK menu browsing</em>, <em>Applet via SCP80</em>; the step editor is form-based (the event action renders the Simulator's event form), and a suite exports/imports as a JSON bundle (the suite plus its scripts).</li>
|
||||
</ul>
|
||||
|
||||
Reference in New Issue
Block a user