release: v3.9.1 - the counter probe sends a fixed read-only APDU

- The probe no longer takes a caller-supplied `apdu`: it always sends the
  read-only SELECT MF (the counter advances on the packet's security
  acceptance whatever the applet answers - 6A86/6D00 are normal there), so
  no caller can turn the sync probe into a write.
- Version 3.9.1: server VERSION, pyproject.toml and the PWA header; sw cache
  simple-v357; docs/api.md and the repo AGENTS.md updated, and the workspace
  AGENTS.md gains the v3.9.1 history entry (its "Currently" line was stale at
  v3.7.1).

docs/api.md

@@ -252,7 +252,7 @@ import also accepts presets exported by the older localStorage-based builds.
 Sync a preset's SCP80 counter with the card.  The card accepts only a counter
 *above* its own (TS 102 225 §5.1.1, SPI1 b5b4 = `10`) and updates it only when
 the packet is accepted, so rejected attempts change nothing; the probe walks a
-doubling ladder (`start+1`, `+2`, `+4`, …) with a read-only command until one
+doubling ladder (`start+1`, `+2`, `+4`, …) with a fixed read-only command until one
 is accepted, then persists `accepted+1` (monotonic) into the keyset.  The
 search stops at a ceiling and after a bounded number of packets, so it can
 never run towards the 40-bit maximum, where the card blocks the counter.  The
@@ -261,15 +261,15 @@ the packet's, TS 102 225 §5.2 Table 3), which is why this probe exists.
 
 ```json
 {"preset_id": "…", "kvn": 2, "tar": "000000", "spi1": "16", "spi2": "21",
- "cntr": "0001000000", "ceiling": "FFFFFFFF", "max_attempts": 40,
- "apdu": "00A40000023F00"}
+ "cntr": "0001000000", "ceiling": "FFFFFFFF", "max_attempts": 40}
 ```
 
 All fields except `preset_id` are optional: `kvn` picks a keyset (the first
 otherwise), `tar`/`spi1`/`spi2` default to the preset's values, `cntr` to the
-keyset's counter, `ceiling` to `FFFFFFFF` (must stay below `FFFFFFFFFF`),
-`max_attempts` to 40 (clamped to 1–64), and `apdu` to a read-only `SELECT MF`
-(the probe command should never modify anything).  A SPI1 without a counter
+keyset's counter, `ceiling` to `FFFFFFFF` (must stay below `FFFFFFFFFF`) and
+`max_attempts` to 40 (clamped to 1–64).  The probe always sends the read-only
+`SELECT MF` - the counter advances on the packet's security acceptance whatever
+the applet answers (`6A86`/`6D00` are normal there).  A SPI1 without a counter
 check is refused (400).
 
 **Response:** `{"success": true, "accepted_cntr": "0001000000",

frontend/index.html

@@ -1801,7 +1801,7 @@
 // ===== Version =====
 // Single source of truth for the PWA version: shown in the header and used
 // by the server version check in pysimConnect().
-const SIMPLE_VERSION = '3.9.0';
+const SIMPLE_VERSION = '3.9.1';
 document.getElementById('app-version').textContent = 'v' + SIMPLE_VERSION;
 
 // ===== Tab switching =====

frontend/sw.js

@@ -1,4 +1,4 @@
-const CACHE = 'simple-v356';
+const CACHE = 'simple-v357';
 const URLS = [
   'index.html',
   'help.html',

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "pysim-simple-server"
-version = "3.9.0"
+version = "3.9.1"
 description = "HTTP REST server wrapping pysim for the SIMple PWA"
 requires-python = ">=3.8"
 # pysim is a git-only dependency installed explicitly by setup.bat/setup.sh.

pysim_simple_server/server.py

@@ -32,7 +32,7 @@ from osmocom.tlv import BER_TLV_IE
 from osmocom.utils import rpad
 
 
-VERSION = '3.9.0'
+VERSION = '3.9.1'
 
 MAX_ENVELOPE_SEGMENTS = 5  # max SMS segments for outgoing C-APDU in ENVELOPE
 
@@ -1668,7 +1668,10 @@ def _counter_probe_params(preset, body):
         'spi1': spi1,
         'spi2': str(body.get('spi2') or preset.get('spi2') or '21').strip().upper(),
         'tar': str(body.get('tar') or preset.get('tar') or '000000').strip().upper(),
-        'apdu': str(body.get('apdu') or COUNTER_PROBE_DEFAULT_APDU).replace(' ', '').upper(),
+        # the probe command is fixed: read-only SELECT MF, which every applet
+        # answers (an error SW is fine - the counter advances on the packet's
+        # security acceptance, not on the command's own result)
+        'apdu': COUNTER_PROBE_DEFAULT_APDU,
     }