catarrh
a387cdc1b6
Streams every APDU the server sends or receives as GSMTAP-SIM UDP packets, so a live capture can be followed in Wireshark or the SIMtrace Analyser without a hardware sniffer. CLI-only: --gsmtap [HOST[:PORT]], default target 127.0.0.1:4729; no UI or API. - pysim_simple_server/gsmtap.py: 16-byte big-endian GSMTAP-SIM header (type 0x04, sub_type 0x00 = APDU / 0x01 = ATR) + raw APDU bytes, a fire-and-forget non-blocking sender that never raises into card I/O, an ApduTracer (a response is sent as data + SW1SW2, the wire form) and a fan-out tracer. The packet layout is byte-identical to sigrok-iso7816-stream / simtrace2-sniff (verified against the sigrok module) and is what the analyser's GSMTAP receiver expects. - __main__.py: --gsmtap option, tracer installed on the shared transport before the first APDU, combined with --apdu-trace via the fan-out and re-attached across equips (pySim nulls the tracer on every equip); one ATR packet per equip from _apply_equipped_card/_send_gsmtap_atr. - start.sh/start.bat: forward their extra arguments to the server, so ./start.sh --gsmtap works. - tests: packet layout, loopback UDP delivery, tracer mapping, target parsing, fan-out; docs (READMEs, help EN/RU, AGENTS); version 3.1.0, sw.js simple-v235.
33 lines
1.0 KiB
Batchfile
33 lines
1.0 KiB
Batchfile
@echo off
|
|
REM pysim-simple-server start script for Windows
|
|
REM Starts the server, preferring the venv if it exists.
|
|
REM PC/SC is built into Windows, so defaults to reader 0.
|
|
|
|
set VENV_DIR=%~dp0.venv
|
|
|
|
if exist "%VENV_DIR%\Scripts\pysim-simple-server.exe" (
|
|
echo Starting pysim-simple-server from venv on http://127.0.0.1:8080
|
|
echo Press Ctrl+C to stop.
|
|
"%VENV_DIR%\Scripts\pysim-simple-server.exe" --http-port 8080 -p 0 %*
|
|
goto :eof
|
|
)
|
|
|
|
if exist "%~dp0pysim_simple_server\__main__.py" (
|
|
echo Starting pysim-simple-server from source on http://127.0.0.1:8080
|
|
echo Press Ctrl+C to stop.
|
|
python -m pysim_simple_server --http-port 8080 -p 0 %*
|
|
goto :eof
|
|
)
|
|
|
|
where pysim-simple-server >nul 2>&1
|
|
if %errorlevel% equ 0 (
|
|
echo Starting pysim-simple-server on http://127.0.0.1:8080
|
|
echo Press Ctrl+C to stop.
|
|
pysim-simple-server --http-port 8080 -p 0 %*
|
|
goto :eof
|
|
)
|
|
|
|
echo Error: pysim-simple-server not installed.
|
|
echo Run setup.bat first or install manually:
|
|
echo pip install pysim-simple-server
|
|
pause |