catarrh/simtrace
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace.git synced 2026-03-16 21:28:36 +03:00
Code Issues Packages Projects Releases Wiki Activity

usermanual: Obey the docbook schema for xmlto

Browse Source 
dblatex was more forgiving, add missing tags to make xmlto happy
This commit is contained in:
Holger Hans Peter Freyther
2012-04-07 11:37:50 +02:00
parent 7e2c289d2e
commit adf48db1b3
3 changed files with 9 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/chapters/firmware.xml
View File

@@ -58,7 +58,8 @@ $ cd ../..
<para>In case the NOR Flash of the SAM7 Microcontroller is either blank or has
become corrupted the Microcontrollers support entering a mode called SAM-BA which
then allows flashing the device using the <filename>sam</filename> application. The
SAM-BA mode can be easily entered by following the below procedure.
SAM-BA mode can be easily entered by following the below procedure.</para>
<procedure>
<title>Entering SAM-BA Mode</title>
<step><para>Unplug the SIMtrace Hardware from USB.</para></step>
@@ -71,9 +72,9 @@ $ cd ../..
<figure>
<title>TEST Jumper</title>
<imageobject>
<mediaobject><imageobject>
<imagedata fileref="images/shortTEST.jpg" width="12cm"/>
</imageobject>
</imageobject></mediaobject>
</figure>
<note><title>v1.0p/v1.1p Hardware Owners</title>
@@ -81,14 +82,13 @@ $ cd ../..
two LEDs are on when powering up the SIMtrace Hardware with the Jumper set.
The reason for this is unknown but there are several workarounds:
<itemizedlist>
<listitem>Press the RESET button while powering up.</listitem>
<listitem>In addition, remove the jumper and put it back.</listitem>
<listitem><para>Press the RESET button while powering up.</para></listitem>
<listitem><para>In addition, remove the jumper and put it back.</para></listitem>
</itemizedlist>
As soon as the two LEDs go off, the SAM-BA mode is properly entered.
</para>
</note>
</para>
<para>The <command>sam</command> application can be compiled to either use libusb or
normal files to program the device, depending on the drivers used you will
need to configure the application one way or another. The programming can then