43 Commits

Author	SHA1	Message	Date
Kevin Redon	6dcf692dfa	RST_PHONE pulldown added on PCB	2012-05-18 19:30:06 +02:00
Kevin Redon	1c82a64101	v1.2p fabrication exported	2012-05-16 19:52:14 +02:00
Kevin Redon	f0bf11b541	C14 change to 4.7uF 0805, silkscreen improved, more space for JTAG	2012-05-16 13:09:38 +02:00
Kevin Redon	436872bb86	DRC rules violations corrected	2012-05-15 20:30:52 +02:00
Harald Welte	2ebce55aa4	SIMtrace: Improve PCB routing of GND, 3V3 and VCC traces ... We have to make sure the impedance of the supply lanes is not too high. Particularly bad was passing GND in 0.2mm under several resistors before even reaching the LDO from the USB socket. This attempts to address the major issues. Also, the input capacitor is moved closer to the LDO once again	2012-05-15 11:20:41 +02:00
Kevin Redon	88a018b3e2	hw: sysmocom added to copper, gerber rendered	2011-11-05 21:30:26 +01:00
Kevin Redon	e2ae9ddbde	hw: solder mask between at91sam7s added	2011-11-05 19:06:28 +01:00
Kevin Redon	e3e4d3a783	VPP connected through bus switch	2011-11-05 18:47:04 +01:00
Kevin Redon	776b703b7e	+1.8V line enlarged on C12, C15, C16. not possible on C19	2011-11-03 20:53:43 +01:00
Kevin Redon	2188a0bccb	footprint refreched, cap near LDO	2011-11-03 20:38:04 +01:00
Kevin Redon	3fc51e7fc5	v1.0p corrected and rendered. BOM updated	2011-07-02 21:01:21 +02:00
Kevin Redon	ba3363e1c0	D2 and D3 now also use STPS340U instead of 1N5819	2011-07-02 19:59:11 +02:00
Kevin Redon	34eaeb1684	PS/gerber rendered for production	2011-07-02 13:37:01 +02:00
Kevin Redon	dcf3d0aaed	board adapted to new footprints	2011-07-02 13:07:58 +02:00
Kevin Redon	b35578b117	BOM updated	2011-06-23 13:22:37 +02:00
Kevin Redon	ff03d7e879	ps/gerber rerendered for the thermal footprints	2011-06-23 00:20:49 +02:00
Kevin Redon	8de684c7ab	thermal pads were missing on the bottom layer on the PCB in kicad	2011-06-23 00:16:44 +02:00
Kevin Redon	5359f93f07	v1.0 released. board version added, output (schema,gerber) rendered	2011-06-21 15:48:25 +02:00
Kevin Redon	581450de31	VCC track increased, name added	2011-06-21 02:09:36 +02:00
Kevin Redon	6a148c762a	diode indicator added	2011-06-21 00:10:11 +02:00
Kevin Redon	60466b8af2	routing redone	2011-06-20 23:42:26 +02:00
Kevin Redon	bcd3695c1a	LDO, and power switch added. not verified yet	2011-06-20 22:50:22 +02:00
Kevin Redon	94b8deaee3	test/erase pins moved	2011-06-20 20:37:41 +02:00
Kevin Redon	7be4d0f4b4	VCC bigger tracks	2011-06-20 18:21:42 +02:00
Kevin Redon	13b6eff33a	bus switch CB3q3244 used instead of QS3244	2011-06-20 17:26:04 +02:00
Kevin Redon	a260964aca	serial moved	2011-06-20 15:49:01 +02:00
Kevin Redon	44acd46f35	USB changed, BOM updated	2011-06-20 13:14:30 +02:00
Kevin Redon	20a0b18b87	tps footprint improved	2011-06-20 11:44:49 +02:00
Kevin Redon	337ebf2a3f	VCC_PHONE connected to GPIO	2011-06-19 15:10:41 +02:00
Kevin Redon	98ca812b0a	SIM_SW connected to GND, components moved	2011-06-19 14:17:52 +02:00
Kevin Redon	65d8f38010	battery name changed	2011-06-18 18:30:48 +02:00
Kevin Redon	5e151c8604	component name moved, pin 1 marked	2011-06-17 11:05:44 +02:00
Kevin Redon	3a2c9c35e5	better routing	2011-06-15 19:22:24 +02:00
Kevin Redon	df7c1e8562	second gnd added for TPS73633	2011-06-15 17:11:43 +02:00
Kevin Redon	72056e86b3	better route for sw2	2011-06-15 16:14:38 +02:00
Kevin Redon	9f07144a2d	UDP_PUP now connected to PA16 (pin 19) on schema	2011-06-15 13:58:50 +02:00
Kevin Redon	0cc4571d58	switch routing corrected	2011-06-15 13:51:48 +02:00
Kevin Redon	b8ab2b69ea	BC847 footprint corrected	2011-06-15 12:47:25 +02:00
Kevin Redon	3914ee6b2b	debug port changed	2011-05-22 15:54:51 +02:00
Kevin Redon	6684648591	board rerouted	2011-05-17 13:25:49 +02:00
Kevin Redon	d3484d64d9	kevin local new versin enforced	2011-05-15 19:36:52 +02:00
Kevin Redon	4a17d44940	update kicad project to v0.9+	2011-05-13 12:08:27 +02:00
Kevin Redon	0c591b5b3a	rename from SIMtrace to SIMtrace	2011-05-13 11:59:25 +02:00