catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-18 06:08:31 +03:00
Code Issues Packages Projects Releases Wiki Activity

Sniffer functionality and sniffer bus board config

Browse Source
This commit is contained in:
Christina Quast
2015-02-24 19:09:08 +01:00
parent a90eefa865
commit 27c643d297
3 changed files with 30 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
sam3s_example/include/board.h
View File

@@ -14,6 +14,9 @@
#include "cciddriver.h"
#include "USBD.h"
#include "USBD_Config.h"
#include "USBDDriver.h"
/** Highlevel */
#include "trace.h"
#include "stdio.h"
@@ -21,6 +24,8 @@
#include "string.h"
#include "inttypes.h"
#define MIN(a, b) ((a < b) ? a : b)
#ifdef __GNUC__
#undef __GNUC__
#endif
@@ -47,15 +52,24 @@
#define LED_NUM_RED 0
#define LED_NUM_GREEN 1
/** Phone */
/** Phone (SIM card emulator)/CCID Reader/MITM configuration **/
/* Normally the communication lines between phone and SIM card are disconnected */
// Disconnect SIM card I/O, VPP line from the phone lines
// FIXME: Per default pins are input, therefore high-impedance, therefore they don not activate the bus switch, right?
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Disconnect SIM card RST, CLK line from the phone lines
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_BUS
/** Sniffer configuration **/
// Connect VPP, CLK and RST lines from smartcard to the phone
//#define PIN_SC_SW {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
// Temporary fix: do not connect
#define PIN_SC_SW {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Connect SIM card I/O lines to the phone
//#define PIN_IO_SW {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
// FIXME: Temporary fix: do not connect
#define PIN_IO_SW {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
/** USART0 pin RX */
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
@@ -134,7 +148,8 @@
#define PIN_SPI_NPCS0 {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
//** USB **/
/// USB pull-up control pin definition (PA16).
// USB pull-up control pin definition (PA16).
// Default: 1 (USB Pullup deactivated)
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Board has UDP controller