mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-19 14:58:35 +03:00
Change directory structure to align with Atmel softpack
This way we can easily check with 'diff' for differences in our code and Atmel softpack. Also, this layout is more suitable for building various different firmware images (e.g. factory-test, dfu-loader, main application) for a variety of different boards (simtrace, owhw, qmod).
This commit is contained in:
Harald Welte
@@ -1,121 +0,0 @@
|
||||
#ifndef _BOARD_
|
||||
#define _BOARD_
|
||||
|
||||
/** Headers */
|
||||
#include "chip.h"
|
||||
/* We need this for a nop instruction in USB_HAL.c */
|
||||
#define __CC_ARM
|
||||
|
||||
/** Board */
|
||||
#include "board_lowlevel.h"
|
||||
#include "uart_console.h"
|
||||
#include "iso7816_4.h"
|
||||
#include "led.h"
|
||||
#include "cciddriver.h"
|
||||
#include "usart.h"
|
||||
#include "USBD.h"
|
||||
|
||||
#include "USBD_Config.h"
|
||||
#include "USBDDriver.h"
|
||||
|
||||
/** Highlevel */
|
||||
#include "trace.h"
|
||||
#include "stdio.h"
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
#include "inttypes.h"
|
||||
#include "syscalls.h"
|
||||
|
||||
#define MIN(a, b) ((a < b) ? a : b)
|
||||
|
||||
#ifdef __GNUC__
|
||||
#undef __GNUC__
|
||||
#endif
|
||||
|
||||
/** Family definition (already defined) */
|
||||
#define sam3s
|
||||
/** Core definition */
|
||||
#define cortexm3
|
||||
|
||||
#define BOARD_MCK 48000000
|
||||
|
||||
#define LED_RED PIO_PA17
|
||||
#define LED_GREEN PIO_PA18
|
||||
|
||||
#define PIN_LED_RED {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PIN_LED_GREEN {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
||||
|
||||
#define LED_NUM_RED 0
|
||||
#define LED_NUM_GREEN 1
|
||||
|
||||
/** USART0 pin RX */
|
||||
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** USART0 pin TX */
|
||||
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
|
||||
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
|
||||
|
||||
#define BOARD_ID_USART ID_USART0
|
||||
#define BOARD_USART_BASE USART0
|
||||
|
||||
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/** UART0 */
|
||||
/** Console baudrate always using 115200. */
|
||||
#define CONSOLE_BAUDRATE 115200
|
||||
/** Usart Hw interface used by the console (UART0). */
|
||||
#define CONSOLE_USART UART0
|
||||
/** Usart Hw ID used by the console (UART0). */
|
||||
#define CONSOLE_ID ID_UART0
|
||||
/** Pins description corresponding to Rxd,Txd, (UART pins) */
|
||||
#define CONSOLE_PINS {PINS_UART}
|
||||
|
||||
/// Smartcard detection pin
|
||||
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
|
||||
#define BOARD_ISO7816_BASE_USART USART0
|
||||
#define BOARD_ISO7816_ID_USART ID_USART0
|
||||
|
||||
#define USART_SIM USART0
|
||||
#define ID_USART_SIM ID_USART0
|
||||
#define USART_PHONE USART1
|
||||
#define ID_USART_PHONE ID_USART1
|
||||
|
||||
#define SIM_PWEN PIO_PA5
|
||||
#define VCC_FWD PIO_PA26
|
||||
|
||||
|
||||
//** USB **/
|
||||
// USB pull-up control pin definition (PA16).
|
||||
// Default: 1 (USB Pullup deactivated)
|
||||
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
// Board has UDP controller
|
||||
#define BOARD_USB_UDP
|
||||
// D+ has external pull-up
|
||||
#define BOARD_USB_PULLUP_EXTERNAL
|
||||
|
||||
#define BOARD_USB_NUMENDPOINTS 8
|
||||
|
||||
// FIXME: in all other cases return 0?
|
||||
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
|
||||
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
|
||||
|
||||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
|
||||
|
||||
#define BOARD_USB_VENDOR SIMTRACE_VENDOR_ID
|
||||
#define BOARD_USB_PRODUCT SIMTRACE_PRODUCT_ID
|
||||
#define BOARD_USB_RELEASE 0
|
||||
|
||||
#define BOARD_USB_DFU
|
||||
#define BOARD_DFU_BOOT_SIZE (16 * 1024)
|
||||
#define BOARD_DFU_PAGE_SIZE 512
|
||||
#define BOARD_DFU_NUM_IF 2
|
||||
|
||||
extern void board_exec_dbg_cmd(int ch);
|
||||
extern void board_main_top(void);
|
||||
#endif
|
||||
@@ -1,46 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2009, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
* Interface for the low-level initialization function.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef BOARD_LOWLEVEL_H
|
||||
#define BOARD_LOWLEVEL_H
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Exported functions
|
||||
*----------------------------------------------------------------------------*/
|
||||
extern void LowLevelInit( void ) ;
|
||||
|
||||
#endif /* BOARD_LOWLEVEL_H */
|
||||
|
||||
@@ -1,3 +0,0 @@
|
||||
#pragma once
|
||||
|
||||
int get_board_version_adc(void);
|
||||
@@ -1,72 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2008, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
* \section Purpose
|
||||
*
|
||||
* Small set of functions for simple and portable LED usage.
|
||||
*
|
||||
* \section Usage
|
||||
*
|
||||
* -# Configure one or more LEDs using LED_Configure and
|
||||
* LED_ConfigureAll.
|
||||
* -# Set, clear and toggle LEDs using LED_Set, LED_Clear and
|
||||
* LED_Toggle.
|
||||
*
|
||||
* LEDs are numbered starting from 0; the number of LEDs depend on the
|
||||
* board being used. All the functions defined here will compile properly
|
||||
* regardless of whether the LED is defined or not; they will simply
|
||||
* return 0 when a LED which does not exist is given as an argument.
|
||||
* Also, these functions take into account how each LED is connected on to
|
||||
* board; thus, \ref LED_Set might change the level on the corresponding pin
|
||||
* to 0 or 1, but it will always light the LED on; same thing for the other
|
||||
* methods.
|
||||
*/
|
||||
|
||||
#ifndef _LED_
|
||||
#define _LED_
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Global Functions
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
extern uint32_t LED_Configure( uint32_t dwLed ) ;
|
||||
|
||||
extern uint32_t LED_Set( uint32_t dwLed ) ;
|
||||
|
||||
extern uint32_t LED_Clear( uint32_t dwLed ) ;
|
||||
|
||||
extern uint32_t LED_Toggle( uint32_t dwLed ) ;
|
||||
|
||||
#endif /* #ifndef LED_H */
|
||||
|
||||
@@ -1,53 +0,0 @@
|
||||
#pragma once
|
||||
#include "board_common.h"
|
||||
|
||||
/** Name of the board */
|
||||
#define BOARD_NAME "OWHW"
|
||||
/** Board definition */
|
||||
#define owhw
|
||||
|
||||
#define BOARD_MAINOSC 18432000
|
||||
|
||||
/* USIM 2 interface (USART) */
|
||||
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
||||
|
||||
/* USIM 2 interface (TC) */
|
||||
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
||||
|
||||
/* USIM 1 interface (USART) */
|
||||
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
||||
|
||||
/* USIM 1 interface (TC) */
|
||||
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
||||
|
||||
#define PIN_SET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
#define PIN_SET_USIM2_PRES {PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
|
||||
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
|
||||
|
||||
#define PINS_CARDSIM { PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
|
||||
|
||||
#define SIMTRACE_VENDOR_ID 0x1d50
|
||||
#define SIMTRACE_PRODUCT_ID 0x60e3 /* FIXME */
|
||||
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
||||
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
||||
|
||||
#define CARDEMU_SECOND_UART
|
||||
/* Disable VCC/ADC detection, as OWHWv2 has no ADCVREF */
|
||||
//#define DETECT_VCC_BY_ADC
|
||||
|
||||
#define HAVE_CARDEM
|
||||
@@ -1,66 +0,0 @@
|
||||
#pragma once
|
||||
#include "board_common.h"
|
||||
|
||||
/** Name of the board */
|
||||
#define BOARD_NAME "QMOD"
|
||||
/** Board definition */
|
||||
#define qmod
|
||||
|
||||
#define BOARD_MAINOSC 12000000
|
||||
|
||||
/* USIM 2 interface (USART) */
|
||||
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
||||
|
||||
/* USIM 2 interface (TC) */
|
||||
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
||||
|
||||
/* USIM 1 interface (USART) */
|
||||
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
||||
|
||||
/* USIM 1 interface (TC) */
|
||||
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
||||
|
||||
#define PIN_SET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
#define PIN_SET_USIM2_PRES {PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
|
||||
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
|
||||
|
||||
#define PINS_CARDSIM { PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
|
||||
|
||||
#define PIN_PRTPWR_OVERRIDE {PIO_PA8, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
/* inputs reading the WWAN LED level */
|
||||
#define PIN_WWAN1 {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
||||
#define PIN_WWAN2 {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
||||
#define PINS_WWAN_IN { PIN_WWAN1, PIN_WWAN2 }
|
||||
|
||||
/* outputs controlling RESET input of modems */
|
||||
#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
|
||||
#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
|
||||
#define PINS_PERST { PIN_PERST1, PIN_PERST2 }
|
||||
|
||||
#define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
|
||||
|
||||
#define SIMTRACE_VENDOR_ID 0x1d50
|
||||
#define SIMTRACE_PRODUCT_ID 0x60e3 /* FIXME */
|
||||
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
||||
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
||||
|
||||
#define CARDEMU_SECOND_UART
|
||||
#define DETECT_VCC_BY_ADC
|
||||
|
||||
#define HAVE_CARDEM
|
||||
@@ -1,85 +0,0 @@
|
||||
#pragma once
|
||||
#include "board_common.h"
|
||||
|
||||
/** Name of the board */
|
||||
#define BOARD_NAME "SAM3S-SIMTRACE"
|
||||
/** Board definition */
|
||||
#define simtrace
|
||||
|
||||
#define BOARD_MAINOSC 18432000
|
||||
|
||||
/** Phone (SIM card emulator)/CCID Reader/MITM configuration **/
|
||||
/* Normally the communication lines between phone and SIM card are disconnected */
|
||||
// Disconnect SIM card I/O, VPP line from the phone lines
|
||||
// FIXME: Per default pins are input, therefore high-impedance, therefore they don not activate the bus switch, right?
|
||||
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
// Disconnect SIM card RST, CLK line from the phone lines
|
||||
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PINS_BUS_DEFAULT PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
|
||||
|
||||
/** Sniffer configuration **/
|
||||
// Connect VPP, CLK and RST lines from smartcard to the phone
|
||||
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
|
||||
|
||||
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
|
||||
|
||||
#define SIM_PWEN_PIN {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
#define PWR_PINS \
|
||||
/* Enable power converter 4.5-6V to 3.3V; low: off */ \
|
||||
{SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}, \
|
||||
/* Enable second power converter: VCC_PHONE to VCC_SIM; high: on */ \
|
||||
{VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
#define SW_SIM PIO_PA8
|
||||
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
|
||||
//#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE}
|
||||
|
||||
/// PIN used for resetting the smartcard
|
||||
// FIXME: Card is resetted with pin set to 0 --> PIO_OUTPUT_1 as default is right?
|
||||
#define PIN_ISO7816_RSTMC {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
|
||||
/// Pins used for connect the smartcard
|
||||
#define PIN_SIM_IO_INPUT {PIO_PA1, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_SIM_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_SIM_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_SIM_CLK_INPUT {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
//#define PINS_ISO7816 PIN_USART1_TXD, PIN_USART1_SCK, PIN_ISO7816_RSTMC
|
||||
#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
|
||||
|
||||
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
|
||||
|
||||
#define VCC_PHONE {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_ISO7816_RST_PHONE {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE | PIO_DEGLITCH }
|
||||
#define PIN_PHONE_IO_INPUT {PIO_PA21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PIN_PHONE_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_PHONE_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} // External Clock Input on PA28
|
||||
//#define PIN_PHONE_CLK {PIO_PA23A_SCK1, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} // External Clock Input on PA28
|
||||
#define PIN_PHONE_CLK_INPUT {PIO_PA29, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
#define PINS_ISO7816_PHONE PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, VCC_PHONE, PIN_PHONE_IO_INPUT, PIN_ISO7816_RST_PHONE
|
||||
//, VCC_PHONE
|
||||
|
||||
|
||||
//** SPI interface **/
|
||||
/// SPI MISO pin definition (PA12).
|
||||
#define PIN_SPI_MISO {1 << 12, PIOA, PIOA, PIO_PERIPH_A, PIO_PULLUP}
|
||||
/// SPI MOSI pin definition (PA13).
|
||||
#define PIN_SPI_MOSI {1 << 13, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/// SPI SPCK pin definition (PA14).
|
||||
#define PIN_SPI_SPCK {1 << 14, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/// SPI pins definition. Contains MISO, MOSI & SPCK (PA12, PA13 & PA14).
|
||||
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
|
||||
/// SPI chip select 0 pin definition (PA11).
|
||||
#define PIN_SPI_NPCS0 {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
#define SIMTRACE_VENDOR_ID 0x1d50
|
||||
#define SIMTRACE_PRODUCT_ID 0x60e3
|
||||
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
||||
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
||||
|
||||
#define HAVE_SNIFFER
|
||||
#define HAVE_CCID
|
||||
#define HAVE_CARDEM
|
||||
#define HAVE_MITM
|
||||
@@ -1,65 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2009, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file syscalls.h
|
||||
*
|
||||
* Implementation of newlib syscall.
|
||||
*
|
||||
*/
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdarg.h>
|
||||
#include <sys/types.h>
|
||||
#include <sys/stat.h>
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Exported functions
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
extern caddr_t _sbrk ( int incr ) ;
|
||||
|
||||
extern int _close( int file ) ;
|
||||
|
||||
extern int _fstat( int file, struct stat *st ) ;
|
||||
|
||||
extern int _isatty( int file ) ;
|
||||
|
||||
extern int _lseek( int file, int ptr, int dir ) ;
|
||||
|
||||
extern int _read(int file, char *ptr, int len) ;
|
||||
|
||||
extern int _write( int file, char *ptr, int len ) ;
|
||||
|
||||
extern void mdelay(unsigned int msecs);
|
||||
@@ -1,48 +0,0 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2009, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _UART_CONSOLE_
|
||||
#define _UART_CONSOLE_
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
extern void UART_Configure( uint32_t dwBaudrate, uint32_t dwMasterClock ) ;
|
||||
extern void UART_PutChar( uint8_t uc ) ;
|
||||
extern uint32_t UART_GetChar( void ) ;
|
||||
extern uint32_t UART_IsRxReady( void ) ;
|
||||
|
||||
|
||||
extern void UART_DumpFrame( uint8_t* pucFrame, uint32_t dwSize ) ;
|
||||
extern void UART_DumpMemory( uint8_t* pucBuffer, uint32_t dwSize, uint32_t dwAddress ) ;
|
||||
extern uint32_t UART_GetInteger( uint32_t* pdwValue ) ;
|
||||
extern uint32_t UART_GetIntegerMinMax( uint32_t* pdwValue, uint32_t dwMin, uint32_t dwMax ) ;
|
||||
extern uint32_t UART_GetHexa32( uint32_t* pdwValue ) ;
|
||||
|
||||
#endif /* _UART_CONSOLE_ */
|
||||
Reference in New Issue
Block a user