make LED definitions board specific

the LEDs (2 of them) were connected to the same pins on all
boards, up to the octsim-tester.
to be able to have board specific LEDs the definitions have moved
from common to the each board.
at the same time I added a bit of documentation what the LEDs are
used for.

Change-Id: I3226a9187a8d0b657ccf5dcd8f3586b2578f96d2

firmware/libboard/common/include/board_common.h

@@ -56,16 +56,12 @@
 /** Core definition */
 #define cortexm3
 
-#define PIO_LED_RED     PIO_PA17
+/* LEDs are used to indicate the status
-#define PIO_LED_GREEN   PIO_PA18
+ * the LED definition is board specific
-
+ * most boards have two LEDs, one green and one red
-#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+ * the red LED indicates of the main firmware is ready (on) or if there is an error (blinking)
-#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+ * the green LED indicates if the firmware is idling (on) or if there is activity (blinking)
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+ */
-
-#define LED_NUM_RED     0
-#define LED_NUM_GREEN   1
-
 /** USART0 pin RX */
 #define PIN_USART0_RXD    {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /** USART0 pin TX */

firmware/libboard/owhw/include/board.h

@@ -31,6 +31,21 @@
 /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
 #define BOARD_MCK 58982400 // 18.432 * 16 / 5
 
+/** MCU pin connected to red LED */
+#define PIO_LED_RED     PIO_PA17
+/** MCU pin connected to green LED */
+#define PIO_LED_GREEN   PIO_PA18
+/** red LED pin definition */
+#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** green LED pin definition */
+#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** LEDs pin definition */
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+/** index for red LED in LEDs pin definition array */
+#define LED_NUM_RED     0
+/** index for green LED in LEDs pin definition array */
+#define LED_NUM_GREEN   1
+
 /* USIM 2 interface (USART) */
 #define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
 #define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

firmware/libboard/qmod/include/board.h

@@ -20,9 +20,6 @@
 #include "board_common.h"
 #include "simtrace_usb.h"
 
-#define LED_USIM1	LED_GREEN
-#define LED_USIM2	LED_RED
-
 /** Name of the board */
 #define BOARD_NAME "QMOD"
 /** Board definition */
@@ -33,6 +30,25 @@
 /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
 #define BOARD_MCK 58000000 // 18.432 * 29 / 6
 
+/** MCU pin connected to red LED */
+#define PIO_LED_RED     PIO_PA17
+/** MCU pin connected to green LED */
+#define PIO_LED_GREEN   PIO_PA18
+/** red LED pin definition */
+#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** green LED pin definition */
+#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** LEDs pin definition */
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+/** index for red LED in LEDs pin definition array */
+#define LED_NUM_RED     0
+/** index for green LED in LEDs pin definition array */
+#define LED_NUM_GREEN   1
+/** the green LED is actually red and used as indication for USIM1 */
+#define LED_USIM1	LED_GREEN
+/** the green LED is actually red and used as indication for USIM2 */
+#define LED_USIM2	LED_RED
+
 /* USIM 2 interface (USART) */
 #define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
 #define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

firmware/libboard/sam3p256/include/board.h

@@ -30,6 +30,21 @@
 /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
 #define BOARD_MCK 58000000
 
+/** MCU pin connected to yellow LED2 */
+#define PIO_LED_RED     PIO_PA17
+/** MCU pin connected to green LED1 */
+#define PIO_LED_GREEN   PIO_PA18
+/** red LED pin definition */
+#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** green LED pin definition */
+#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** LEDs pin definition */
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+/** index for red LED in LEDs pin definition array */
+#define LED_NUM_RED     0
+/** index for green LED in LEDs pin definition array */
+#define LED_NUM_GREEN   1
+
 /** Pin configuration **/
 /* Button to force bootloader start (shorted to ground when pressed */
 #define PIN_BOOTLOADER_SW      {PIO_PA20, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}

firmware/libboard/simtrace/include/board.h

@@ -31,6 +31,21 @@
 /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
 #define BOARD_MCK 58982400 // 18.432 * 16 / 5
 
+/** MCU pin connected to red LED */
+#define PIO_LED_RED     PIO_PA17
+/** MCU pin connected to green LED */
+#define PIO_LED_GREEN   PIO_PA18
+/** red LED pin definition */
+#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** green LED pin definition */
+#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/** LEDs pin definition */
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+/** index for red LED in LEDs pin definition array */
+#define LED_NUM_RED     0
+/** index for green LED in LEDs pin definition array */
+#define LED_NUM_GREEN   1
+
 /** Pin configuration **/
 /* Button to force bootloader start (shorted to ground when pressed */
 #define PIN_BOOTLOADER_SW      {PIO_PA31, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}