This commit is contained in:
Christina Quast
2014-11-28 10:27:32 +01:00
parent 2d18f171c2
commit b0a0570e11
21 changed files with 13149 additions and 0 deletions

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,23 @@
#ifndef _BOARD_
#define _BOARD_
#include "chip.h"
#include "syscalls.h" /** RedHat Newlib minimal stub */
/** Name of the board */
#define BOARD_NAME "SAM3S-EK"
/** Board definition */
#define sam3sek
/** Family definition (already defined) */
#define sam3s
/** Core definition */
#define cortexm3
#define BOARD_MAINOSC 12000000
#define BOARD_MCK 48000000
//#define LED_STATUS PIO_PA8
#define LED_STATUS PIO_PA17
#endif

View File

@@ -0,0 +1,46 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for the low-level initialization function.
*
*/
#ifndef BOARD_LOWLEVEL_H
#define BOARD_LOWLEVEL_H
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
void LowLevelInit( void ) ;
#endif /* BOARD_LOWLEVEL_H */

View File

@@ -0,0 +1,42 @@
#ifndef _LIB_SAM3S_
#define _LIB_SAM3S_
/*
* Peripherals registers definitions
*/
#if defined sam3s4
#elif defined sam3s2
#elif defined sam3s1
#else
#warning Library does not support the specified chip, specifying sam3s4.
#define sam3s4
#endif
#include "SAM3S.h"
/* Define attribute */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#define WEAK __attribute__ ((weak))
#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
#define WEAK __weak
#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
#define WEAK __attribute__ ((weak))
#endif
/* Define NO_INIT attribute */
#if defined ( __CC_ARM )
#define NO_INIT
#elif defined ( __ICCARM__ )
#define NO_INIT __no_init
#elif defined ( __GNUC__ )
#define NO_INIT
#endif
/*
* Core
*/
#include "exceptions.h"
#endif

View File

@@ -0,0 +1,97 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
* Interface for default exception handlers.
*/
#ifndef _EXCEPTIONS_
#define _EXCEPTIONS_
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
/* Function prototype for exception table items (interrupt handler). */
typedef void( *IntFunc )( void ) ;
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
/* Default empty handler */
extern void IrqHandlerNotUsed( void ) ;
/* Cortex-M3 core handlers */
extern void NMI_Handler( void );
extern void HardFault_Handler( void );
extern void MemManage_Handler( void );
extern void BusFault_Handler( void );
extern void UsageFault_Handler( void );
extern void SVC_Handler( void );
extern void DebugMon_Handler( void );
extern void PendSV_Handler( void );
extern void SysTick_Handler( void );
/* Peripherals handlers */
extern void ACC_IrqHandler( void ) ;
extern void ADC_IrqHandler( void ) ;
extern void CRCCU_IrqHandler( void ) ;
extern void DAC_IrqHandler( void ) ;
extern void EEFC_IrqHandler( void ) ;
extern void MCI_IrqHandler( void ) ;
extern void PIOA_IrqHandler( void ) ;
extern void PIOB_IrqHandler( void ) ;
extern void PIOC_IrqHandler( void ) ;
extern void PMC_IrqHandler( void ) ;
extern void PWM_IrqHandler( void ) ;
extern void RSTC_IrqHandler( void ) ;
extern void RTC_IrqHandler( void ) ;
extern void RTT_IrqHandler( void ) ;
extern void SMC_IrqHandler( void ) ;
extern void SPI_IrqHandler( void ) ;
extern void SSC_IrqHandler( void ) ;
extern void SUPC_IrqHandler( void ) ;
extern void TC0_IrqHandler( void ) ;
extern void TC1_IrqHandler( void ) ;
extern void TC2_IrqHandler( void ) ;
extern void TC3_IrqHandler( void ) ;
extern void TC4_IrqHandler( void ) ;
extern void TC5_IrqHandler( void ) ;
extern void TWI0_IrqHandler( void ) ;
extern void TWI1_IrqHandler( void ) ;
extern void UART0_IrqHandler( void ) ;
extern void UART1_IrqHandler( void ) ;
extern void USART0_IrqHandler( void ) ;
extern void USART1_IrqHandler( void ) ;
extern void USBD_IrqHandler(void);
extern void WDT_IrqHandler( void ) ;
#endif /* _EXCEPTIONS_ */

206
sam3s_example/include/pio.h Normal file
View File

@@ -0,0 +1,206 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2010, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* This file provides a basic API for PIO configuration and usage of
* user-controlled pins. Please refer to the board.h file for a list of
* available pin definitions.
*
* \section Usage
*
* -# Define a constant pin description array such as the following one, using
* the existing definitions provided by the board.h file if possible:
* \code
* const Pin pPins[] = {PIN_USART0_TXD, PIN_USART0_RXD};
* \endcode
* Alternatively, it is possible to add new pins by provided the full Pin
* structure:
* \code
* // Pin instance to configure PA10 & PA11 as inputs with the internal
* // pull-up enabled.
* const Pin pPins = {
* (1 << 10) | (1 << 11),
* REG_PIOA,
* ID_PIOA,
* PIO_INPUT,
* PIO_PULLUP
* };
* \endcode
* -# Configure a pin array by calling PIO_Configure() with a pointer to the
* array and its size (which is computed using the PIO_LISTSIZE macro).
* -# Change and get the value of a user-controlled pin using the PIO_Set,
* PIO_Clear and PIO_Get methods.
* -# Get the level being currently output by a user-controlled pin configured
* as an output using PIO_GetOutputDataStatus().
*/
#ifndef _PIO_
#define _PIO_
/*
* Headers
*/
#include "chip.h"
#include <stdint.h>
/*
* Global Definitions
*/
/* The pin is controlled by the associated signal of peripheral A. */
#define PIO_PERIPH_A 0
/* The pin is controlled by the associated signal of peripheral B. */
#define PIO_PERIPH_B 1
/* The pin is controlled by the associated signal of peripheral C. */
#define PIO_PERIPH_C 2
/* The pin is controlled by the associated signal of peripheral D. */
#define PIO_PERIPH_D 3
/* The pin is an input. */
#define PIO_INPUT 4
/* The pin is an output and has a default level of 0. */
#define PIO_OUTPUT_0 5
/* The pin is an output and has a default level of 1. */
#define PIO_OUTPUT_1 6
/* Default pin configuration (no attribute). */
#define PIO_DEFAULT (0 << 0)
/* The internal pin pull-up is active. */
#define PIO_PULLUP (1 << 0)
/* The internal glitch filter is active. */
#define PIO_DEGLITCH (1 << 1)
/* The pin is open-drain. */
#define PIO_OPENDRAIN (1 << 2)
/* The internal debouncing filter is active. */
#define PIO_DEBOUNCE (1 << 3)
/* Enable additional interrupt modes. */
#define PIO_IT_AIME (1 << 4)
/* Interrupt High Level/Rising Edge detection is active. */
#define PIO_IT_RE_OR_HL (1 << 5)
/* Interrupt Edge detection is active. */
#define PIO_IT_EDGE (1 << 6)
/* Low level interrupt is active */
#define PIO_IT_LOW_LEVEL (0 | 0 | PIO_IT_AIME)
/* High level interrupt is active */
#define PIO_IT_HIGH_LEVEL (PIO_IT_RE_OR_HL | 0 | PIO_IT_AIME)
/* Falling edge interrupt is active */
#define PIO_IT_FALL_EDGE (0 | PIO_IT_EDGE | PIO_IT_AIME)
/* Rising edge interrupt is active */
#define PIO_IT_RISE_EDGE (PIO_IT_RE_OR_HL | PIO_IT_EDGE | PIO_IT_AIME)
#ifdef __cplusplus
extern "C" {
#endif
/*
* Global Macros
*/
/**
* Calculates the size of an array of Pin instances. The array must be defined
* locally (i.e. not a pointer), otherwise the computation will not be correct.
* \param pPins Local array of Pin instances.
* \return Number of elements in array.
*/
#define PIO_LISTSIZE(pPins) (sizeof(pPins) / sizeof(Pin))
/*
* Global Types
*/
/*
* Describes the type and attribute of one PIO pin or a group of similar pins.
* The #type# field can have the following values:
* - PIO_PERIPH_A
* - PIO_PERIPH_B
* - PIO_OUTPUT_0
* - PIO_OUTPUT_1
* - PIO_INPUT
*
* The #attribute# field is a bitmask that can either be set to PIO_DEFAULt,
* or combine (using bitwise OR '|') any number of the following constants:
* - PIO_PULLUP
* - PIO_DEGLITCH
* - PIO_DEBOUNCE
* - PIO_OPENDRAIN
* - PIO_IT_LOW_LEVEL
* - PIO_IT_HIGH_LEVEL
* - PIO_IT_FALL_EDGE
* - PIO_IT_RISE_EDGE
*/
typedef struct _Pin
{
/* Bitmask indicating which pin(s) to configure. */
uint32_t mask;
/* Pointer to the PIO controller which has the pin(s). */
Pio *pio;
/* Peripheral ID of the PIO controller which has the pin(s). */
uint8_t id;
/* Pin type. */
uint8_t type;
/* Pin attribute. */
uint8_t attribute;
} Pin ;
/*
* Global Access Macros
*/
/*
* Global Functions
*/
extern uint8_t PIO_Configure( const Pin *list, uint32_t size ) ;
extern void PIO_Set( const Pin *pin ) ;
extern void PIO_Clear( const Pin *pin ) ;
extern uint8_t PIO_Get( const Pin *pin ) ;
extern uint8_t PIO_GetOutputDataStatus( const Pin *pin ) ;
extern void PIO_SetDebounceFilter( const Pin *pin, uint32_t cuttoff );
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _PIO_ */

View File

@@ -0,0 +1,59 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _PMC_
#define _PMC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include <stdint.h>
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
extern void PMC_EnablePeripheral( uint32_t dwId ) ;
extern void PMC_DisablePeripheral( uint32_t dwId ) ;
extern void PMC_EnableAllPeripherals( void ) ;
extern void PMC_DisableAllPeripherals( void ) ;
extern uint32_t PMC_IsPeriphEnabled( uint32_t dwId ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _PMC_ */

115
sam3s_example/include/spi.h Normal file
View File

@@ -0,0 +1,115 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for Serial Peripheral Interface (SPI) controller.
*
*/
#ifndef _SPI_
#define _SPI_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
/*----------------------------------------------------------------------------
* Macros
*----------------------------------------------------------------------------*/
/**
*
* Here are several macros which should be used when configuring a SPI
* peripheral.
*
* \section spi_configuration_macros SPI Configuration Macros
* - \ref SPI_PCS
* - \ref SPI_SCBR
* - \ref SPI_DLYBS
* - \ref SPI_DLYBCT
*/
/** Calculate the PCS field value given the chip select NPCS value */
#define SPI_PCS(npcs) ((~(1 << npcs) & 0xF) << 16)
/** Calculates the value of the CSR SCBR field given the baudrate and MCK. */
#define SPI_SCBR(baudrate, masterClock) ((uint32_t) (masterClock / baudrate) << 8)
/** Calculates the value of the CSR DLYBS field given the desired delay (in ns) */
#define SPI_DLYBS(delay, masterClock) ((uint32_t) (((masterClock / 1000000) * delay) / 1000) << 16)
/** Calculates the value of the CSR DLYBCT field given the desired delay (in ns) */
#define SPI_DLYBCT(delay, masterClock) ((uint32_t) (((masterClock / 1000000) * delay) / 32000) << 24)
/*------------------------------------------------------------------------------ */
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void SPI_Enable( Spi* spi ) ;
extern void SPI_Disable( Spi* spi ) ;
extern void SPI_EnableIt( Spi* spi, uint32_t dwSources ) ;
extern void SPI_DisableIt( Spi* spi, uint32_t dwSources ) ;
extern void SPI_Configure( Spi* spi, uint32_t dwId, uint32_t dwConfiguration ) ;
extern void SPI_ConfigureNPCS( Spi* spi, uint32_t dwNpcs, uint32_t dwConfiguration ) ;
extern uint32_t SPI_Read( Spi* spi ) ;
extern void SPI_Write( Spi* spi, uint32_t dwNpcs, uint16_t wData ) ;
extern uint32_t SPI_GetStatus( Spi* spi ) ;
extern uint32_t SPI_IsFinished( Spi* pSpi ) ;
extern void SPI_PdcEnableTx( Spi* spi ) ;
extern void SPI_PdcDisableTx( Spi* spi ) ;
extern void SPI_PdcEnableRx( Spi* spi ) ;
extern void SPI_PdcDisableRx( Spi* spi ) ;
extern void SPI_PdcSetTx( Spi* spi, void* pvTxBuf, uint32_t dwTxCount, void* pvTxNextBuf, uint32_t dwTxNextCount ) ;
extern void SPI_PdcSetRx( Spi* spi, void* pvRxBuf, uint32_t dwRxCount, void* pvRxNextBuf, uint32_t dwRxNextCount ) ;
extern uint32_t SPI_WriteBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength ) ;
extern uint32_t SPI_ReadBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _SPI_ */

View File

@@ -0,0 +1,65 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file syscalls.h
*
* Implementation of newlib syscall.
*
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include <stdio.h>
#include <stdarg.h>
#include <sys/types.h>
#include <sys/stat.h>
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern caddr_t _sbrk ( int incr ) ;
extern int link( char *old, char *new ) ;
extern int _close( int file ) ;
extern int _fstat( int file, struct stat *st ) ;
extern int _isatty( int file ) ;
extern int _lseek( int file, int ptr, int dir ) ;
extern int _read(int file, char *ptr, int len) ;
extern int _write( int file, char *ptr, int len ) ;