catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-17 05:38:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

Removed sym links, replaced them with actual folders

Browse Source
This commit is contained in:
Christina Quast
2015-04-07 19:57:44 +02:00
parent fbcd8a1bfd
commit b0bbb1b52e
47 changed files with 0 additions and 52 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
firmware/include_board
View File

@@ -1 +0,0 @@
./atmel_softpack_libraries/libboard_sam3s-ek/include/

108
firmware/include_board/bitbanding.h Normal file
View File

@@ -0,0 +1,108 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _BITBANDING_
#define _BITBANDING_
/*----------------------------------------------------------------------------
* \file bitbanding.h
* Include Defines & macros for bit-banding.
*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------
* Header files
*----------------------------------------------------------------------------*/
#include <stdint.h>
/*----------------------------------------------------------------------------
* Global Macros
*----------------------------------------------------------------------------*/
/**
* \brief Check if the address is in bit banding sram region.
*
* \note The address should be in area of 0x2000000 ~ 0x200FFFFF
*
* \param x The address to check.
*/
#define IS_BITBAND_SRAM_ADDR(x) \
( ((uint32_t)(x)) >= 0x20000000 && \
((uint32_t)(x)) < (0x20000000+0x100000) )
/**
* \brief Check if the address is in bit banding peripheral region
*
* \note The address should be in area of 0x4000000 ~ 0x400FFFFF
* \param x The address to check
*/
#define IS_BITBAND_PERIPH_ADDR(x) \
( ((uint32_t)(x)) >= 0x40000000 && \
((uint32_t)(x)) < (0x40000000+0x100000) )
/**
* \brief Calculate bit band alias address.
*
* Calculate the bit band alias address and return a pointer address to word.
*
* \param addr The byte address of bitbanding bit.
* \param bit The bit position of bitbanding bit.
* \callergraph
*/
#define BITBAND_ALIAS_ADDRESS(addr, bit) \
((volatile uint32_t*)((((uint32_t)(addr) & 0xF0000000) + 0x02000000) \
+((((uint32_t)(addr)&0xFFFFF)*32)\
+( (uint32_t)(bit)*4))))
/**
* \brief Bit write through bit banding.
*
* \param addr32 32-bit aligned byte address where the bit exists.
* \param bit Bit position.
* \param val The value that the bit is set to.
* \callergraph
*/
#define WRITE_BITBANDING(addr32, bit, val) do {\
*BITBAND_ALIAS_ADDRESS(addr32,bit) = (val); \
} while (0);
/**
* \brief Toggle bit through bit banding
*
* \param addr32 32-bit aligned byte address where the bit exists.
* \param bit Bit position.
*/
#define TOGGLE_BITBANDING(addr32, bit) do {\
volatile uint32_t * p = \
BITBAND_ALIAS_ADDRESS(addr32,bit); \
if (*p) *p = 0; \
else *p = 1; \
}while(0);
#endif /* #ifndef _BITBANDING_ */

191
firmware/include_board/board.h Normal file
View File

@@ -0,0 +1,191 @@
#ifndef _BOARD_
#define _BOARD_
/** Headers */
#include "chip.h"
/* We need this for a nop instruction in USB_HAL.c */
#define __CC_ARM
/** Board */
#include "board_lowlevel.h"
#include "uart_console.h"
#include "iso7816_4.h"
#include "led.h"
#include "cciddriver.h"
#include "USBD.h"
#include "USBD_Config.h"
#include "USBDDriver.h"
/** Highlevel */
#include "trace.h"
#include "stdio.h"
#include "stdlib.h"
#include "string.h"
#include "inttypes.h"
#include "simtrace.h"
#define MIN(a, b) ((a < b) ? a : b)
#ifdef __GNUC__
#undef __GNUC__
#endif
/** Name of the board */
#define BOARD_NAME "SAM3S-SIMTRACE"
/** Board definition */
#define simtrace
/** Family definition (already defined) */
#define sam3s
/** Core definition */
#define cortexm3
#define BOARD_MAINOSC 18432000
#define BOARD_MCK 48000000
#define LED_RED PIO_PA17
#define LED_GREEN PIO_PA18
#define PIN_LED_RED {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_GREEN {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
#define LED_NUM_RED 0
#define LED_NUM_GREEN 1
/** Phone (SIM card emulator)/CCID Reader/MITM configuration **/
/* Normally the communication lines between phone and SIM card are disconnected */
// Disconnect SIM card I/O, VPP line from the phone lines
// FIXME: Per default pins are input, therefore high-impedance, therefore they don not activate the bus switch, right?
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Disconnect SIM card RST, CLK line from the phone lines
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_BUS_DEFAULT PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
/** Sniffer configuration **/
// Connect VPP, CLK and RST lines from smartcard to the phone
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
/** USART0 pin RX */
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** USART0 pin TX */
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
#define BOARD_ID_USART ID_USART0
#define BOARD_USART_BASE USART0
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** UART0 */
/** Console baudrate always using 115200. */
#define CONSOLE_BAUDRATE 115200
/** Usart Hw interface used by the console (UART0). */
#define CONSOLE_USART UART0
/** Usart Hw ID used by the console (UART0). */
#define CONSOLE_ID ID_UART0
/** Pins description corresponding to Rxd,Txd, (UART pins) */
#define CONSOLE_PINS {PINS_UART}
/// Smartcard detection pin
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
#define BOARD_ISO7816_BASE_USART USART0
#define BOARD_ISO7816_ID_USART ID_USART0
#define USART_SIM USART0
#define ID_USART_SIM ID_USART0
#define USART_PHONE USART1
#define ID_USART_PHONE ID_USART1
#define SIM_PWEN PIO_PA5
#define VCC_FWD PIO_PA26
#define SIM_PWEN_PIN {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PWR_PINS \
/* Enable power converter 4.5-6V to 3.3V; low: off */ \
{SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}, \
/* Enable second power converter: VCC_PHONE to VCC_SIM; high: on */ \
{VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define SW_SIM PIO_PA8
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
//#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE}
/// PIN used for resetting the smartcard
#define RST_SIM (1 << 7)
// FIXME: Card is resetted with pin set to 0 --> PIO_OUTPUT_1 as default is right?
#define PIN_ISO7816_RSTMC {RST_SIM, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/// Pins used for connect the smartcard
#define PIN_SIM_IO_INPUT {PIO_PA1, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PIN_SIM_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_SIM_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_SIM_CLK_INPUT {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
//#define PINS_ISO7816 PIN_USART1_TXD, PIN_USART1_SCK, PIN_ISO7816_RSTMC
#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
#define VCC_PHONE {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PIN_ISO7816_RST_PHONE {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE }
#define PIN_PHONE_IO_INPUT {PIO_PA21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PIN_PHONE_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_PHONE_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} // External Clock Input on PA28
//#define PIN_PHONE_CLK {PIO_PA23A_SCK1, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} // External Clock Input on PA28
#define PIN_PHONE_CLK_INPUT {PIO_PA29, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PINS_ISO7816_PHONE PIN_PHONE_IO, PIN_PHONE_CLK, PIN_ISO7816_RST_PHONE
//, VCC_PHONE
//** SPI interface **/
/// SPI MISO pin definition (PA12).
#define PIN_SPI_MISO {1 << 12, PIOA, PIOA, PIO_PERIPH_A, PIO_PULLUP}
/// SPI MOSI pin definition (PA13).
#define PIN_SPI_MOSI {1 << 13, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI SPCK pin definition (PA14).
#define PIN_SPI_SPCK {1 << 14, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI pins definition. Contains MISO, MOSI & SPCK (PA12, PA13 & PA14).
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
/// SPI chip select 0 pin definition (PA11).
#define PIN_SPI_NPCS0 {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
//** USB **/
// USB pull-up control pin definition (PA16).
// Default: 1 (USB Pullup deactivated)
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Board has UDP controller
#define BOARD_USB_UDP
// D+ has external pull-up
#define BOARD_USB_PULLUP_EXTERNAL
#define BOARD_USB_NUMENDPOINTS 8
// FIXME: in all other cases return 0?
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
#define ATMEL_VENDOR_ID 0x03EB
#define SIMTRACE_PRODUCT_ID 0x6004
//#define OPENPCD_VENDOR_ID 0x16c0
//#define SIMTRACE_PRODUCT_ID 0x0762
#define USB_VENDOR_ID OPENPCD_VENDOR_ID
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
#endif

46
firmware/include_board/board_lowlevel.h Normal file
View File

@@ -0,0 +1,46 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for the low-level initialization function.
*
*/
#ifndef BOARD_LOWLEVEL_H
#define BOARD_LOWLEVEL_H
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void LowLevelInit( void ) ;
#endif /* BOARD_LOWLEVEL_H */

88
firmware/include_board/iso7816_4.h Normal file
View File

@@ -0,0 +1,88 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
//------------------------------------------------------------------------------
/** \file
*
* \section Purpose
*
* Definition of methods for ISO7816 driver.
*
* \section Usage
*
* -# ISO7816_Init
* -# ISO7816_IccPowerOff
* -# ISO7816_XfrBlockTPDU_T0
* -# ISO7816_Escape
* -# ISO7816_RestartClock
* -# ISO7816_StopClock
* -# ISO7816_toAPDU
* -# ISO7816_Datablock_ATR
* -# ISO7816_SetDataRateandClockFrequency
* -# ISO7816_StatusReset
* -# ISO7816_cold_reset
* -# ISO7816_warm_reset
* -# ISO7816_Decode_ATR
*----------------------------------------------------------------------------*/
#ifndef ISO7816_4_H
#define ISO7816_4_H
/*------------------------------------------------------------------------------
* Constants Definition
*----------------------------------------------------------------------------*/
/** Size max of Answer To Reset */
#define ATR_SIZE_MAX 55
/** NULL byte to restart byte procedure */
#define ISO_NULL_VAL 0x60
/*------------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void ISO7816_Init( const Pin *pPinIso7816RstMC );
extern void ISO7816_IccPowerOff(void);
extern uint32_t ISO7816_XfrBlockTPDU_T0(const uint8_t *pAPDU,
uint8_t *pMessage,
uint16_t wLength,
uint16_t *retlen);
extern void ISO7816_Escape( void );
extern void ISO7816_RestartClock(void);
extern void ISO7816_StopClock( void );
extern void ISO7816_toAPDU( void );
extern uint32_t ISO7816_Datablock_ATR( uint8_t* pAtr, uint8_t* pLength );
extern void ISO7816_SetDataRateandClockFrequency( uint32_t dwClockFrequency, uint32_t dwDataRate );
extern uint8_t ISO7816_StatusReset( void );
extern void ISO7816_cold_reset( void );
extern void ISO7816_warm_reset( void );
extern void ISO7816_Decode_ATR( uint8_t* pAtr );
#endif /* ISO7816_4_H */

72
firmware/include_board/led.h Normal file
View File

@@ -0,0 +1,72 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* Small set of functions for simple and portable LED usage.
*
* \section Usage
*
* -# Configure one or more LEDs using LED_Configure and
* LED_ConfigureAll.
* -# Set, clear and toggle LEDs using LED_Set, LED_Clear and
* LED_Toggle.
*
* LEDs are numbered starting from 0; the number of LEDs depend on the
* board being used. All the functions defined here will compile properly
* regardless of whether the LED is defined or not; they will simply
* return 0 when a LED which does not exist is given as an argument.
* Also, these functions take into account how each LED is connected on to
* board; thus, \ref LED_Set might change the level on the corresponding pin
* to 0 or 1, but it will always light the LED on; same thing for the other
* methods.
*/
#ifndef _LED_
#define _LED_
#include <stdint.h>
//------------------------------------------------------------------------------
// Global Functions
//------------------------------------------------------------------------------
extern uint32_t LED_Configure( uint32_t dwLed ) ;
extern uint32_t LED_Set( uint32_t dwLed ) ;
extern uint32_t LED_Clear( uint32_t dwLed ) ;
extern uint32_t LED_Toggle( uint32_t dwLed ) ;
#endif /* #ifndef LED_H */

65
firmware/include_board/syscalls.h Normal file
View File

@@ -0,0 +1,65 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file syscalls.h
*
* Implementation of newlib syscall.
*
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include <stdio.h>
#include <stdarg.h>
#include <sys/types.h>
#include <sys/stat.h>
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern caddr_t _sbrk ( int incr ) ;
extern int link( char *old, char *new ) ;
extern int _close( int file ) ;
extern int _fstat( int file, struct stat *st ) ;
extern int _isatty( int file ) ;
extern int _lseek( int file, int ptr, int dir ) ;
extern int _read(int file, char *ptr, int len) ;
extern int _write( int file, char *ptr, int len ) ;

48
firmware/include_board/uart_console.h Normal file
View File

@@ -0,0 +1,48 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _UART_CONSOLE_
#define _UART_CONSOLE_
#include <stdint.h>
extern void UART_Configure( uint32_t dwBaudrate, uint32_t dwMasterClock ) ;
extern void UART_PutChar( uint8_t uc ) ;
extern uint32_t UART_GetChar( void ) ;
extern uint32_t UART_IsRxReady( void ) ;
extern void UART_DumpFrame( uint8_t* pucFrame, uint32_t dwSize ) ;
extern void UART_DumpMemory( uint8_t* pucBuffer, uint32_t dwSize, uint32_t dwAddress ) ;
extern uint32_t UART_GetInteger( uint32_t* pdwValue ) ;
extern uint32_t UART_GetIntegerMinMax( uint32_t* pdwValue, uint32_t dwMin, uint32_t dwMax ) ;
extern uint32_t UART_GetHexa32( uint32_t* pdwValue ) ;
#endif /* _UART_CONSOLE_ */