catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-19 06:48:34 +03:00
Code Issues Packages Projects Releases Wiki Activity

Removed unused code and header files from atmel lib

Browse Source 
Also, remove includes of unused header files in chip.h
This commit is contained in:
Christina Quast
2015-04-07 18:45:50 +02:00
parent d3f1638f1b
commit d0339af87b
173 changed files with 0 additions and 40961 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7735
firmware/sam3s_examples_include/SAM3S.h
View File

File diff suppressed because it is too large Load Diff

73
firmware/sam3s_examples_include/USBD_LEDs.h
View File

@@ -1,73 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Collection of LEDs for using the USB device controller on AT91
* microcontrollers.
*/
#ifndef USBDLEDS_H
#define USBDLEDS_H
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "board.h"
/** \addtogroup usbd_hal
*@{
*/
/*----------------------------------------------------------------------------
* Constants
*----------------------------------------------------------------------------*/
/** \addtogroup usbd_leds USB Device LEDs
* @{
* This page lists the LEDs used in the USB %device driver.
*
* - USBD_LEDPOWER
* - USBD_LEDUSB
* - USBD_LEDOTHER
*/
/** LED for indicating that the device is powered. */
#define USBD_LEDPOWER 0
/** LED for indicating USB activity. */
#define USBD_LEDUSB 1
/** LED for custom usage. */
#define USBD_LEDOTHER 2
/** @}*/
/**@}*/
#endif //#ifndef USBDLEDS_H

151
firmware/sam3s_examples_include/acc.h
View File

@@ -1,151 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* Interface for configuration the Analog-to-Digital Converter (ACC) peripheral.
*
* \section Usage
*
* -# Configurate the pins for ACC
* -# Initialize the ACC with ACC_Initialize().
* -# Select the active channel using ACC_EnableChannel()
* -# Start the conversion with ACC_StartConversion()
* -# Wait the end of the conversion by polling status with ACC_GetStatus()
* -# Finally, get the converted data using ACC_GetConvertedData()
*
*/
#ifndef _ACC_
#define _ACC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#include <assert.h>
/*------------------------------------------------------------------------------
* Definitions
*------------------------------------------------------------------------------*/
#define ACC_SELPLUS_AD12B0 0
#define ACC_SELPLUS_AD12B1 1
#define ACC_SELPLUS_AD12B2 2
#define ACC_SELPLUS_AD12B3 3
#define ACC_SELPLUS_AD12B4 4
#define ACC_SELPLUS_AD12B5 5
#define ACC_SELPLUS_AD12B6 6
#define ACC_SELPLUS_AD12B7 7
#define ACC_SELMINUS_TS 0
#define ACC_SELMINUS_ADVREF 1
#define ACC_SELMINUS_DAC0 2
#define ACC_SELMINUS_DAC1 3
#define ACC_SELMINUS_AD12B0 4
#define ACC_SELMINUS_AD12B1 5
#define ACC_SELMINUS_AD12B2 6
#define ACC_SELMINUS_AD12B3 7
#ifdef __cplusplus
extern "C" {
#endif
/*------------------------------------------------------------------------------
* Macros function of register access
*------------------------------------------------------------------------------*/
#define ACC_CfgModeReg(pAcc, mode) { \
(pAcc)->ACC_MR = (mode);\
}
#define ACC_GetModeReg( pAcc ) ((pAcc)->ACC_MR)
#define ACC_StartConversion( pAcc ) ((pAcc)->ACC_CR = ACC_CR_START)
#define ACC_SoftReset( pAcc ) ((pAcc)->ACC_CR = ACC_CR_SWRST)
#define ACC_EnableChannel( pAcc, dwChannel ) {\
assert( dwChannel < 16 ) ;\
(pAcc)->ACC_CHER = (1 << (dwChannel));\
}
#define ACC_DisableChannel( pAcc, dwChannel ) {\
assert( dwChannel < 16 ) ;\
(pAcc)->ACC_CHDR = (1 << (dwChannel));\
}
#define ACC_EnableIt( pAcc, dwMode ) {\
assert( ((dwMode)&0xFFF00000)== 0 ) ;\
(pAcc)->ACC_IER = (dwMode);\
}
#define ACC_DisableIt( pAcc, dwMode ) {\
assert( ((dwMode)&0xFFF00000)== 0 ) ;\
(pAcc)->ACC_IDR = (dwMode);\
}
#define ACC_EnableDataReadyIt( pAcc ) ((pAcc)->ACC_IER = AT91C_ACC_DRDY)
#define ACC_GetStatus( pAcc ) ((pAcc)->ACC_ISR)
#define ACC_GetChannelStatus( pAcc ) ((pAcc)->ACC_CHSR)
#define ACC_GetInterruptMaskStatus( pAcc ) ((pAcc)->ACC_IMR)
#define ACC_GetLastConvertedData( pAcc ) ((pAcc)->ACC_LCDR)
#define ACC_CfgAnalogCtrlReg( pAcc, dwMode ) {\
assert( ((dwMode) & 0xFFFCFF3C) == 0 ) ;\
(pAcc)->ACC_ACR = (dwMode);\
}
#define ACC_CfgExtModeReg( pAcc, extmode ) {\
assert( ((extmode) & 0xFF00FFFE) == 0 ) ;\
(pAcc)->ACC_EMR = (extmode);\
}
#define ACC_GetAnalogCtrlReg( pAcc ) ((pAcc)->ACC_ACR)
/*------------------------------------------------------------------------------
* Exported functions
*------------------------------------------------------------------------------*/
extern void ACC_Configure( Acc *pAcc, uint8_t idAcc, uint8_t ucSelplus, uint8_t ucSelminus,
uint16_t wAc_en, uint16_t wEdge, uint16_t wInvert ) ;
extern void ACC_SetComparisionPair( Acc *pAcc, uint8_t ucSelplus, uint8_t ucSelminus ) ;
extern uint32_t ACC_GetComparisionResult( Acc* pAcc, uint32_t dwStatus ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _ACC_ */

157
firmware/sam3s_examples_include/adc.h
View File

@@ -1,157 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* Interface for configuration the Analog-to-Digital Converter (ADC) peripheral.
*
* \section Usage
*
* -# Configurate the pins for ADC
* -# Initialize the ADC with ADC_Initialize().
* -# Select the active channel using ADC_EnableChannel()
* -# Start the conversion with ADC_StartConversion()
* -# Wait the end of the conversion by polling status with ADC_GetStatus()
* -# Finally, get the converted data using ADC_GetConvertedData()
*
*/
#ifndef _ADC_
#define _ADC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <assert.h>
#include <stdint.h>
/*------------------------------------------------------------------------------
* Definitions
*------------------------------------------------------------------------------*/
/* SAM3S */
#define ADC_FREQ_MAX 20000000
#define ADC_FREQ_MIN 1000000
#define ADC_STARTUP_NORM 40
#define ADC_STARTUP_FAST 12
#define ADC_CHANNEL_0 0
#define ADC_CHANNEL_1 1
#define ADC_CHANNEL_2 2
#define ADC_CHANNEL_3 3
#define ADC_CHANNEL_4 4
#define ADC_CHANNEL_5 5
#define ADC_CHANNEL_6 6
#define ADC_CHANNEL_7 7
#define ADC_CHANNEL_8 8
#define ADC_CHANNEL_9 9
#define ADC_CHANNEL_10 10
#define ADC_CHANNEL_11 11
#define ADC_CHANNEL_12 12
#define ADC_CHANNEL_13 13
#define ADC_CHANNEL_14 14
#define ADC_CHANNEL_15 15
#ifdef __cplusplus
extern "C" {
#endif
/*------------------------------------------------------------------------------
* Macros function of register access
*------------------------------------------------------------------------------*/
#define ADC_GetModeReg( pAdc ) ((pAdc)->ADC_MR)
#define ADC_StartConversion( pAdc ) ((pAdc)->ADC_CR = ADC_CR_START)
#define ADC_EnableChannel( pAdc, channel ) {\
assert( channel < 16 ) ;\
(pAdc)->ADC_CHER = (1 << (channel));\
}
#define ADC_DisableChannel(pAdc, channel) {\
assert( (channel) < 16 ) ;\
(pAdc)->ADC_CHDR = (1 << (channel));\
}
#define ADC_EnableIt(pAdc, dwMode) {\
(pAdc)->ADC_IER = (dwMode);\
}
#define ADC_DisableIt(pAdc, dwMode) {\
(pAdc)->ADC_IDR = (dwMode);\
}
#define ADC_EnableTS(pAdc,dwMode) {\
(pAdc)->ADC_ACR |= dwMode;\
}
#define ADC_EnableDataReadyIt(pAdc) ((pAdc)->ADC_IER = AT91C_ADC_DRDY)
#define ADC_GetStatus(pAdc) ((pAdc)->ADC_ISR)
#define ADC_GetCompareMode(pAdc) (((pAdc)->ADC_EMR)& (ADC_EMR_CMPMODE_Msk))
#define ADC_GetChannelStatus(pAdc) ((pAdc)->ADC_CHSR)
#define ADC_GetInterruptMaskStatus(pAdc) ((pAdc)->ADC_IMR)
#define ADC_GetLastConvertedData(pAdc) ((pAdc)->ADC_LCDR)
/*------------------------------------------------------------------------------
* Exported functions
*------------------------------------------------------------------------------*/
extern void ADC_Initialize( Adc* pAdc, uint32_t idAdc );
extern void ADC_CfgTiming( Adc* pAdc, uint32_t tracking, uint32_t settling, uint32_t transfer );
extern void ADC_cfgFrequency( Adc* pAdc, uint32_t startup, uint32_t prescal );
extern void ADC_CfgTrigering( Adc* pAdc, uint32_t trgEn, uint32_t trgSel, uint32_t freeRun );
extern void ADC_CfgLowRes( Adc* pAdc, uint32_t resolution );
extern void ADC_CfgPowerSave( Adc* pAdc, uint32_t sleep, uint32_t fwup );
extern void ADC_CfgChannelMode( Adc* pAdc, uint32_t useq, uint32_t anach );
extern void ADC_check( Adc* pAdc, uint32_t mck_freq );
extern uint32_t ADC_GetConvertedData( Adc* pAdc, uint32_t dwChannel ) ;
extern void ADC_SetCompareChannel( Adc* pAdc, uint32_t dwChannel ) ;
extern void ADC_SetCompareMode( Adc* pAdc, uint32_t dwMode ) ;
extern void ADC_SetComparisonWindow( Adc* pAdc, uint32_t dwHi_Lo ) ;
extern uint32_t ADC_IsInterruptMasked( Adc* pAdc, uint32_t dwFlag ) ;
extern uint32_t ADC_IsStatusSet( Adc* pAdc, uint32_t dwFlag ) ;
extern uint32_t ADC_IsChannelInterruptStatusSet( uint32_t adc_sr, uint32_t dwChannel ) ;
extern uint32_t ADC_ReadBuffer( Adc* pADC, int16_t *pwBuffer, uint32_t dwSize ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _ADC_ */

80
firmware/sam3s_examples_include/async.h
View File

@@ -1,80 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Provide a routine for asynchronous transfer.
*
*/
#ifndef _ASYNC_
#define _ASYNC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include <stdint.h>
/*----------------------------------------------------------------------------
* Definition
*----------------------------------------------------------------------------*/
/** Transfer is still pending.*/
#define ASYNC_STATUS_PENDING 0xFF
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Type
*----------------------------------------------------------------------------*/
/** \brief Asynchronous transfer descriptor. */
typedef struct _Async
{
/** Asynchronous transfer status.*/
volatile uint8_t status ;
/** Callback function to invoke when transfer completes or fails.*/
void *callback ;
/** Driver storage area; do not use.*/
uint32_t pStorage[4] ;
} Async ;
/*----------------------------------------------------------------------------
* Global functions
*----------------------------------------------------------------------------*/
extern uint32_t ASYNC_IsFinished( Async* pAsync ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _ASYNC_ */

65
firmware/sam3s_examples_include/crccu.h
View File

@@ -1,65 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for Cyclic Redundancy Check Calculation Unit (CRCCU).
*/
#ifndef _CRCCU_
#define _CRCCU_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
typedef struct
{
uint32_t TR_ADDR ;
uint32_t TR_CTRL ;
} CrcDscr ;
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void CRCCU_ResetCrcValue( Crccu* pCrccu ) ;
extern void CRCCU_Configure( Crccu* pCrccu, uint32_t dwDscrAddr, uint32_t dwMode ) ;
extern uint32_t CRCCU_ComputeCrc( Crccu* pCrccu ) ;
#endif /* #ifndef _CRCCU_ */

146
firmware/sam3s_examples_include/dacc.h
View File

@@ -1,146 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* Interface for configuration the Analog-to-Digital Converter (DACC) peripheral.
*
* \section Usage
*
* -# Configurate the pins for DACC
* -# Initialize the DACC with DACC_Initialize().
* -# Select the active channel using DACC_EnableChannel()
* -# Start the conversion with DACC_StartConversion()
* -# Wait the end of the conversion by polling status with DACC_GetStatus()
* -# Finally, get the converted data using DACC_GetConvertedData()
*
*/
#ifndef _DACC_
#define _DACC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#include <assert.h>
/*------------------------------------------------------------------------------
* Definitions
*------------------------------------------------------------------------------*/
#define DACC_CHANNEL_0 0
#define DACC_CHANNEL_1 1
#ifdef __cplusplus
extern "C" {
#endif
/*------------------------------------------------------------------------------
* Macros function of register access
*------------------------------------------------------------------------------*/
#define DACC_CfgModeReg(pDACC, mode) { \
(pDACC)->DACC_MR = (mode);\
}
#define DACC_GetModeReg(pDACC) ((pDACC)->DACC_MR)
#define DACC_StartConversion(pDACC) ((pDACC)->DACC_CR = DACC_CR_START)
#define DACC_SoftReset(pDACC) ((pDACC)->DACC_CR = DACC_CR_SWRST)
#define DACC_EnableChannel(pDACC, channel) {\
(pDACC)->DACC_CHER = (1 << (channel));\
}
#define DACC_DisableChannel(pDACC, channel) {\
(pDACC)->DACC_CHDR = (1 << (channel));\
}
#define DACC_EnableIt(pDACC, mode) {\
assert( ((mode)&0xFFF00000)== 0 ) ;\
(pDACC)->DACC_IER = (mode);\
}
#define DACC_DisableIt(pDACC, mode) {\
assert( ((mode)&0xFFF00000)== 0 ) ;\
(pDACC)->DACC_IDR = (mode);\
}
#define DACC_EnableDataReadyIt(pDACC) ((pDACC)->DACC_IER = AT91C_DACC_DRDY)
#define DACC_GetStatus(pDACC) ((pDACC)->DACC_ISR)
#define DACC_GetChannelStatus(pDACC) ((pDACC)->DACC_CHSR)
#define DACC_GetInterruptMaskStatus(pDACC) ((pDACC)->DACC_IMR)
#define DACC_GetLastConvertedData(pDACC) ((pDACC)->DACC_LCDR)
#define DACC_CfgAnalogCtrlReg(pDACC,mode) {\
assert( ((mode) & 0xFFFCFF3C)==0 ) ;\
(pDACC)->DACC_ACR = (mode);\
}
#define DACC_CfgExtModeReg(pDACC, extmode) {\
assert( ((extmode) & 0xFF00FFFE)==0 ) ;\
(pDACC)->DACC_EMR = (extmode);\
}
#define DACC_GetAnalogCtrlReg(pDACC) ((pDACC)->DACC_ACR)
/*------------------------------------------------------------------------------
* Exported functions
*------------------------------------------------------------------------------*/
extern void DACC_Initialize( Dacc* pDACC,
uint8_t idDACC,
uint8_t trgEn,
uint8_t trgSel,
uint8_t word,
uint8_t sleepMode,
uint32_t mck,
uint8_t refresh,/*refresh period*/
uint8_t user_sel,/*user channel selection*/
uint32_t tag_mode,/*using tag for channel number*/
uint32_t startup
);
extern void DACC_SetConversionData( Dacc* pDACC, uint32_t dwData ) ;
extern uint32_t DACC_WriteBuffer( Dacc* pDACC, uint16_t* pwBuffer, uint32_t dwSize ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _DACC_ */

113
firmware/sam3s_examples_include/efc.h
View File

@@ -1,113 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \section Purpose
*
* Interface for configuration the Enhanced Embedded Flash Controller (EEFC) peripheral.
*
* \section Usage
*
* -# Enable/disable %flash ready interrupt sources using EFC_EnableFrdyIt()
* and EFC_DisableFrdyIt().
* -# Translates the given address into which EEFC, page and offset values
* for difference density %flash memory using EFC_TranslateAddress().
* -# Computes the address of a %flash access given the EFC, page and offset
* for difference density %flash memory using EFC_ComputeAddress().
* -# Start the executing command with EFC_StartCommand()
* -# Retrieve the current status of the EFC using EFC_GetStatus().
* -# Retrieve the result of the last executed command with EFC_GetResult().
*/
#ifndef _EEFC_
#define _EEFC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Definitions
*----------------------------------------------------------------------------*/
/* EFC command */
#define EFC_FCMD_GETD 0x00
#define EFC_FCMD_WP 0x01
#define EFC_FCMD_WPL 0x02
#define EFC_FCMD_EWP 0x03
#define EFC_FCMD_EWPL 0x04
#define EFC_FCMD_EA 0x05
#define EFC_FCMD_SLB 0x08
#define EFC_FCMD_CLB 0x09
#define EFC_FCMD_GLB 0x0A
#define EFC_FCMD_SFB 0x0B
#define EFC_FCMD_CFB 0x0C
#define EFC_FCMD_GFB 0x0D
#define EFC_FCMD_STUI 0x0E /* Start unique ID */
#define EFC_FCMD_SPUI 0x0F /* Stop unique ID */
/* The IAP function entry addreass */
#define CHIP_FLASH_IAP_ADDRESS (0x00800008)
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void EFC_EnableFrdyIt( Efc* efc ) ;
extern void EFC_DisableFrdyIt( Efc* efc ) ;
extern void EFC_SetWaitState( Efc* efc, uint8_t cycles ) ;
extern void EFC_TranslateAddress( Efc** pEfc, uint32_t dwAddress, uint16_t *pwPage, uint16_t *pwOffset ) ;
extern void EFC_ComputeAddress( Efc* efc, uint16_t wPage, uint16_t wOffset, uint32_t *pdwAddress ) ;
extern void EFC_StartCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument ) ;
extern uint32_t EFC_PerformCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument, uint32_t dwUseIAP ) ;
extern uint32_t EFC_GetStatus( Efc* efc ) ;
extern uint32_t EFC_GetResult( Efc* efc ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _EEFC_ */

79
firmware/sam3s_examples_include/flashd.h
View File

@@ -1,79 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* The flash driver provides the unified interface for flash program operations.
*
*/
#ifndef _FLASHD_
#define _FLASHD_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void FLASHD_Initialize( uint32_t dwMCk, uint32_t dwUseIAP ) ;
extern uint32_t FLASHD_Erase( uint32_t dwAddress ) ;
extern uint32_t FLASHD_Write( uint32_t dwAddress, const void *pvBuffer, uint32_t dwSize ) ;
extern uint32_t FLASHD_Lock( uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd ) ;
extern uint32_t FLASHD_Unlock( uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd ) ;
extern uint32_t FLASHD_IsLocked( uint32_t dwStart, uint32_t dwEnd ) ;
extern uint32_t FLASHD_SetGPNVM( uint8_t gpnvm ) ;
extern uint32_t FLASHD_ClearGPNVM( uint8_t gpnvm ) ;
extern uint32_t FLASHD_IsGPNVMSet( uint8_t gpnvm ) ;
#define FLASHD_IsSecurityBitSet() FLASHD_IsGPNVMSet( 0 )
#define FLASHD_SetSecurityBit() FLASHD_SetGPNVM( 0 )
extern uint32_t FLASHD_ReadUniqueID( uint32_t* pdwUniqueID ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _FLASHD_ */

206
firmware/sam3s_examples_include/hsmci.h
View File

@@ -1,206 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/** \addtogroup hsmci_module Working with HSMCI
* The HSMCI driver provides the interface to configure and use the HSMCI
* peripheral.
*
* The user needs to set the number of wait states depending on the frequency used.\n
* Configure number of cycles for flash read/write operations in the FWS field of HSMCI_FMR.
*
* It offers a function to send flash command to HSMCI and waits for the
* flash to be ready.
*
* To send flash command, the user could do in either of following way:
* <ul>
* <li>Write a correct key, command and argument in HSMCI_FCR. </li>
* <li>Or, Use IAP (In Application Programming) function which is executed from
* ROM directly, this allows flash programming to be done by code running in flash.</li>
* <li>Once the command is achieved, it can be detected even by polling EEFC_FSR or interrupt.
* </ul>
*
* The command argument could be a page number,GPNVM number or nothing, it depends on
* the command itself. Some useful functions in this driver could help user tranlate physical
* flash address into a page number and vice verse.
*
* For more accurate information, please look at the EEFC section of the
* Datasheet.
*
* Related files :\n
* \ref hsmci_pdc.c\n
* \ref hsmci.h.\n
*/
/*@{*/
/*@}*/
/**
* \file
*/
/**
*
* \section Purpose
*
* Implement MultiMediaCard(MCI) Interface Driver
*
* \section Usage
*
* -# MCI_Init(): Initializes a MCI driver instance and the underlying
* peripheral.
* -# MCI_Handler() : Interrupt handler which is called by ISR handler.
* -# MCI_SetSpeed() : Configure the MCI CLKDIV in the _MR register
* (\ref Hsmci::HSMCI_MR).
* -# MCI_SetBusWidth() : Configure the MCI SDCBUS in the _SDCR register
* (\ref Hsmci::HSMCI_SDCR).
* -# MCI_EnableHsMode() : Configure the MCI HSMODE in the _CFG register
* (\ref Hsmci::HSMCI_CFG).
*/
#ifndef HSMCID_H
#define HSMCID_H
/** \addtogroup sdmmc_hal
*@{
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#include <stdio.h>
//#include <memories/sdmmc/sdmmc_cmd.h>
/*----------------------------------------------------------------------------
* Constants
*----------------------------------------------------------------------------*/
/* Transfer type */
/** MultiMedia Transfer type: no data */
#define MCI_NO_TRANSFER 0
/** MultiMedia Transfer type: Device to Host (read) */
#define MCI_START_READ 1
/** MultiMedia Transfer type: Host to Device (write) & check BUSY */
#define MCI_START_WRITE 2
/** Device to Host (read) without command */
#define MCI_READ 3
/** Host to Device (write) without command & check BUSY */
#define MCI_WRITE 4
/** MultiMedia Transfer type: STOP transfer */
#define MCI_STOP_TRANSFER 5
/** MCI Initialize clock 400K Hz */
#define MCI_INITIAL_SPEED 400000
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief MCI Transfer Request prepared by the application upper layer.
*
* This structure is sent to the Sdmmc_SendCommand function to start the transfer.
* At the end of the transfer, the callback is invoked.
*/
typedef struct _MciCmd {
/** Command code. */
uint32_t cmd;
/** Command argument. */
uint32_t arg;
/** Data buffer, with MCI_DMA_ENABLE defined 1, the buffer can be
* 1, 2 or 4 bytes aligned. It has to be 4 byte aligned if no DMA.
*/
uint8_t *pData;
/** Size of data block in bytes. */
uint16_t blockSize;
/** Number of blocks to be transfered */
uint16_t nbBlock;
/** Response buffer. */
uint32_t *pResp;
/** Optional user-provided callback function. */
void (*callback)( uint8_t status, void *pArg ) ;
/** Optional argument to the callback function. */
void *pArg;
/** SD card command option. */
uint8_t resType:7, /** Response */
busyCheck:1; /** Check busy as end of command */
/** Indicate transfer type */
uint8_t tranType;
/** Indicate end of transfer status */
uint8_t status;
/** Command state. */
volatile uint8_t state;
} MciCmd;
/**
* \brief MCI Driver
*/
typedef struct
{
/** Pointer to a MCI peripheral. */
Hsmci *pMciHw;
/** Pointer to currently executing command. */
MciCmd *pCommand;
/** MCI peripheral identifier. */
uint8_t mciId;
/** Mutex. */
volatile uint8_t semaphore;
} Mcid;
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void MCI_Disable(Hsmci *pMciHw);
extern void MCI_Enable(Hsmci *pMciHw);
extern uint8_t MCI_EnableHsMode(Mcid * pMci, uint8_t hsEnable);
extern void MCI_Init( Mcid *pMci, Hsmci *pMciHw, uint8_t mciId, uint32_t dwMCk ) ;
extern uint32_t MCI_SetBusWidth(Mcid *pMci, uint32_t busWidth);
extern uint32_t MCI_SetSpeed(Mcid *pMci, uint32_t mciSpeed, uint32_t mck);
/* pdc if used */
extern void MCI_Reset(Mcid *pMci, uint8_t keepSettings);
#ifdef __cplusplus
}
#endif
/**@}*/
#endif //#ifndef HSMCID_H

127
firmware/sam3s_examples_include/pwmc.h
View File

@@ -1,127 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \par Purpose
*
* Interface for configuration the Pulse Width Modulation Controller (PWM) peripheral.
*
* \par Usage
*
* -# Configures PWM clocks A & B to run at the given frequencies using
* \ref PWMC_ConfigureClocks().
* -# Configure PWMC channel using \ref PWMC_ConfigureChannel(), \ref PWMC_ConfigureChannelExt()
* \ref PWMC_SetPeriod(), \ref PWMC_SetDutyCycle() and \ref PWMC_SetDeadTime().
* -# Enable & disable channel using \ref PWMC_EnableChannel() and
* \ref PWMC_DisableChannel().
* -# Enable & disable the period interrupt for the given PWM channel using
* \ref PWMC_EnableChannelIt() and \ref PWMC_DisableChannelIt().
* -# Enable & disable the selected interrupts sources on a PWMC peripheral
* using \ref PWMC_EnableIt() and \ref PWMC_DisableIt().
* -# Control syncronous channel using \ref PWMC_ConfigureSyncChannel(),
* \ref PWMC_SetSyncChannelUpdatePeriod() and \ref PWMC_SetSyncChannelUpdateUnlock().
* -# Control PWM override output using \ref PWMC_SetOverrideValue(),
* \ref PWMC_EnableOverrideOutput() and \ref PWMC_DisableOverrideOutput().
* -# Send data through the transmitter using \ref PWMC_WriteBuffer().
*
*/
#ifndef _PWMC_
#define _PWMC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void PWMC_ConfigureChannel(
Pwm* pPwm,
uint8_t channel,
uint32_t prescaler,
uint32_t alignment,
uint32_t polarity);
extern void PWMC_ConfigureChannelExt(
Pwm* pPwm,
uint8_t channel,
uint32_t prescaler,
uint32_t alignment,
uint32_t polarity,
uint32_t countEventSelect,
uint32_t DTEnable,
uint32_t DTHInverte,
uint32_t DTLInverte);
extern void PWMC_ConfigureClocks(uint32_t clka, uint32_t clkb, uint32_t mck);
extern void PWMC_SetPeriod( Pwm* pPwm, uint8_t channel, uint16_t period);
extern void PWMC_SetDutyCycle( Pwm* pPwm, uint8_t channel, uint16_t duty);
extern void PWMC_SetDeadTime( Pwm* pPwm, uint8_t channel, uint16_t timeH, uint16_t timeL);
extern void PWMC_ConfigureSyncChannel( Pwm* pPwm,
uint32_t channels,
uint32_t updateMode,
uint32_t requestMode,
uint32_t requestComparisonSelect);
extern void PWMC_SetSyncChannelUpdatePeriod( Pwm* pPwm, uint8_t period);
extern void PWMC_SetSyncChannelUpdateUnlock( Pwm* pPwm );
extern void PWMC_EnableChannel( Pwm* pPwm, uint8_t channel);
extern void PWMC_DisableChannel( Pwm* pPwm, uint8_t channel);
extern void PWMC_EnableChannelIt( Pwm* pPwm, uint8_t channel);
extern void PWMC_DisableChannelIt( Pwm* pPwm, uint8_t channel);
extern void PWMC_EnableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
extern void PWMC_DisableIt( Pwm* pPwm, uint32_t sources1, uint32_t sources2);
extern uint8_t PWMC_WriteBuffer(Pwm *pwmc,
void *buffer,
uint32_t length);
extern void PWMC_SetOverrideValue( Pwm* pPwm, uint32_t value);
extern void PWMC_EnableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
extern void PWMC_DisableOverrideOutput( Pwm* pPwm, uint32_t value, uint32_t sync);
extern void PWMC_SetFaultMode( Pwm* pPwm, uint32_t mode);
extern void PWMC_FaultClear( Pwm* pPwm, uint32_t fault);
extern void PWMC_SetFaultProtectionValue( Pwm* pPwm, uint32_t value);
extern void PWMC_EnableFaultProtection( Pwm* pPwm, uint32_t value);
extern void PWMC_ConfigureComparisonUnit( Pwm* pPwm, uint32_t x, uint32_t value, uint32_t mode);
extern void PWMC_ConfigureEventLineMode( Pwm* pPwm, uint32_t x, uint32_t mode);
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _PWMC_ */

97
firmware/sam3s_examples_include/rtc.h
View File

@@ -1,97 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for Real Time Clock (RTC) controller.
*
*/
#ifndef _RTC_
#define _RTC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Definitions
*----------------------------------------------------------------------------*/
#define RTC_HOUR_BIT_LEN_MASK 0x3F
#define RTC_MIN_BIT_LEN_MASK 0x7F
#define RTC_SEC_BIT_LEN_MASK 0x7F
#define RTC_CENT_BIT_LEN_MASK 0x7F
#define RTC_YEAR_BIT_LEN_MASK 0xFF
#define RTC_MONTH_BIT_LEN_MASK 0x1F
#define RTC_DATE_BIT_LEN_MASK 0x3F
#define RTC_WEEK_BIT_LEN_MASK 0x07
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
extern void RTC_SetHourMode( Rtc* pRtc, uint32_t dwMode ) ;
extern uint32_t RTC_GetHourMode( Rtc* pRtc ) ;
extern void RTC_EnableIt( Rtc* pRtc, uint32_t dwSources ) ;
extern void RTC_DisableIt( Rtc* pRtc, uint32_t dwSources ) ;
extern int RTC_SetTime( Rtc* pRtc, uint8_t ucHour, uint8_t ucMinute, uint8_t ucSecond ) ;
extern void RTC_GetTime( Rtc* pRtc, uint8_t *pucHour, uint8_t *pucMinute, uint8_t *pucSecond ) ;
extern int RTC_SetTimeAlarm( Rtc* pRtc, uint8_t *pucHour, uint8_t *pucMinute, uint8_t *pucSecond ) ;
extern void RTC_GetDate( Rtc* pRtc, uint16_t *pwYear, uint8_t *pucMonth, uint8_t *pucDay, uint8_t *pucWeek ) ;
extern int RTC_SetDate( Rtc* pRtc, uint16_t wYear, uint8_t ucMonth, uint8_t ucDay, uint8_t ucWeek ) ;
extern int RTC_SetDateAlarm( Rtc* pRtc, uint8_t *pucMonth, uint8_t *pucDay ) ;
extern void RTC_ClearSCCR( Rtc* pRtc, uint32_t dwMask ) ;
extern uint32_t RTC_GetSR( Rtc* pRtc, uint32_t dwMask ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _RTC_ */

82
firmware/sam3s_examples_include/rtt.h
View File

@@ -1,82 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \par Purpose
*
* Interface for Real Time Timer (RTT) controller.
*
* \par Usage
*
* -# Changes the prescaler value of the given RTT and restarts it
* using \ref RTT_SetPrescaler().
* -# Get current value of the RTT using \ref RTT_GetTime().
* -# Enables the specified RTT interrupt using \ref RTT_EnableIT().
* -# Get the status register value of the given RTT using \ref RTT_GetStatus().
* -# Configures the RTT to generate an alarm at the given time
* using \ref RTT_SetAlarm().
*/
#ifndef _RTT_
#define _RTT_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
extern void RTT_SetPrescaler( Rtt* pRtt, uint16_t wPrescaler ) ;
extern uint32_t RTT_GetTime( Rtt* pRtt ) ;
extern void RTT_EnableIT( Rtt* pRtt, uint32_t dwSources ) ;
extern uint32_t RTT_GetStatus( Rtt *pRtt ) ;
extern void RTT_SetAlarm( Rtt *pRtt, uint32_t dwTime ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef RTT_H */

135
firmware/sam3s_examples_include/spi_pdc.h
View File

@@ -1,135 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Implementation of SPI PDC driver.
*
*/
#ifndef _SPI_PDC_
#define _SPI_PDC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
/*----------------------------------------------------------------------------
* Definitions
*----------------------------------------------------------------------------*/
/** An unspecified error has occured.*/
#define SPID_ERROR 1
/** SPI driver is currently in use.*/
#define SPID_ERROR_LOCK 2
/*----------------------------------------------------------------------------
* Macros
*----------------------------------------------------------------------------*/
/** Calculates the value of the SCBR field of the Chip Select Register given MCK and SPCK.*/
#define SPID_CSR_SCBR(mck, spck) (SPI_CSR_SCBR(((mck) / (spck))) )
/** Calculates the value of the DLYBS field of the Chip Select Register given delay in ns and MCK.*/
#define SPID_CSR_DLYBS(mck, delay) ( SPI_CSR_DLYBS(((((delay) * ((mck) / 1000000)) / 1000) + 1)) )
/** Calculates the value of the DLYBCT field of the Chip Select Register given delay in ns and MCK.*/
#define SPID_CSR_DLYBCT(mck, delay) ( SPI_CSR_DLYBCT((((delay) / 32 * ((mck) / 1000000)) / 1000) + 1) )
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
/** SPI transfer complete callback. */
typedef void (*SpidCallback)( uint8_t, void* ) ;
/** \brief Spi Transfer Request prepared by the application upper layer.
*
* This structure is sent to the SPI_SendCommand function to start the transfer.
* At the end of the transfer, the callback is invoked by the interrupt handler.
*/
typedef struct _SpidCmd
{
/** Pointer to the command data. */
uint8_t *pCmd;
/** Command size in bytes. */
uint8_t cmdSize;
/** Pointer to the data to be sent. */
uint8_t *pData;
/** Data size in bytes. */
unsigned short dataSize;
/** SPI chip select. */
uint8_t spiCs;
/** Callback function invoked at the end of transfer. */
SpidCallback callback;
/** Callback arguments. */
void *pArgument;
} SpidCmd ;
/** Constant structure associated with SPI port. This structure prevents
client applications to have access in the same time. */
typedef struct _Spid
{
/** Pointer to SPI Hardware registers */
Spi* pSpiHw ;
/** SPI Id as defined in the product datasheet */
char spiId ;
/** Current SpiCommand being processed */
SpidCmd *pCurrentCommand ;
/** Mutual exclusion semaphore. */
volatile char semaphore ;
} Spid ;
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern uint32_t SPID_Configure( Spid* pSpid, Spi* pSpiHw, uint8_t spiId ) ;
extern void SPID_ConfigureCS( Spid* pSpid, uint32_t dwCS, uint32_t dwCsr ) ;
extern uint32_t SPID_SendCommand( Spid* pSpid, SpidCmd* pCommand ) ;
extern void SPID_Handler( Spid* pSpid ) ;
extern uint32_t SPID_IsBusy( const Spid* pSpid ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _SPI_PDC_ */

73
firmware/sam3s_examples_include/ssc.h
View File

@@ -1,73 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for Synchronous Serial (SSC) controller.
*
*/
#ifndef _SSC_
#define _SSC_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void SSC_Configure(uint32_t bitRate, uint32_t masterClock);
extern void SSC_ConfigureTransmitter(uint32_t tcmr, uint32_t tfmr);
extern void SSC_ConfigureReceiver(uint32_t rcmr, uint32_t rfmr);
extern void SSC_EnableTransmitter(void);
extern void SSC_DisableTransmitter(void);
extern void SSC_EnableReceiver(void);
extern void SSC_DisableReceiver(void);
extern void SSC_EnableInterrupts(uint32_t sources);
extern void SSC_DisableInterrupts(uint32_t sources);
extern void SSC_Write(uint32_t frame);
extern uint32_t SSC_Read(void);
extern uint8_t SSC_WriteBuffer(void *buffer, uint32_t length);
extern uint8_t SSC_ReadBuffer(void *buffer, uint32_t length);
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _SSC_ */

78
firmware/sam3s_examples_include/supc.h
View File

@@ -1,78 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _SUPC_
#define _SUPC_
#include "chip.h"
#include <stdint.h>
//------------------------------------------------------------------------------
// Global functions
//------------------------------------------------------------------------------
extern
#ifdef __ICCARM__
__ramfunc /* IAR */
#endif
void SUPC_EnableFlash( Supc* pSupc, uint32_t dwTime ) ;
extern
#ifdef __ICCARM__
__ramfunc /* IAR */
#endif
void SUPC_DisableFlash( Supc* pSupc ) ;
extern void SUPC_SetVoltageOutput( Supc* pSupc, uint32_t dwVoltage ) ;
extern void SUPC_EnableDeepMode( Supc* pSupc ) ;
extern void SUPC_EnableSram( Supc* pSupc ) ;
extern void SUPC_DisableSram( Supc* pSupc ) ;
extern void SUPC_EnableRtc( Supc* pSupc ) ;
extern void SUPC_DisableRtc( Supc* pSupc ) ;
extern void SUPC_SetBodSampling( Supc* pSupc, uint32_t dwMode ) ;
extern void SUPC_DisableDeepMode( Supc* pSupc ) ;
extern void SUPC_DisableVoltageRegulator( Supc* pSupc ) ;
extern void SUPC_Shutdown( Supc* pSupc ) ;
extern void SUPC_SetWakeUpSources( Supc* pSupc, uint32_t dwSources ) ;
extern void SUPC_SetWakeUpInputs( Supc* pSupc, uint32_t dwInputs ) ;
#endif /* #ifndef _SUPC_ */

1
firmware/sam3s_examples_include/trace.h
View File

@@ -1 +0,0 @@
atmel_softpack_libraries/libchip_sam3s/include/trace.h

111
firmware/sam3s_examples_include/twi.h
View File

@@ -1,111 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* Interface for configuration the Two Wire Interface (TWI) peripheral.
*
*/
#ifndef _TWI_
#define _TWI_
/*------------------------------------------------------------------------------
* Headers
*------------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Macros
*----------------------------------------------------------------------------*/
/* Returns 1 if the TXRDY bit (ready to transmit data) is set in the given status register value.*/
#define TWI_STATUS_TXRDY(status) ((status & TWI_SR_TXRDY) == TWI_SR_TXRDY)
/* Returns 1 if the RXRDY bit (ready to receive data) is set in the given status register value.*/
#define TWI_STATUS_RXRDY(status) ((status & TWI_SR_RXRDY) == TWI_SR_RXRDY)
/* Returns 1 if the TXCOMP bit (transfer complete) is set in the given status register value.*/
#define TWI_STATUS_TXCOMP(status) ((status & TWI_SR_TXCOMP) == TWI_SR_TXCOMP)
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* External function
*----------------------------------------------------------------------------*/
extern void TWI_ConfigureMaster(Twi *pTwi, uint32_t twck, uint32_t mck);
extern void TWI_ConfigureSlave(Twi *pTwi, uint8_t slaveAddress);
extern void TWI_Stop(Twi *pTwi);
extern void TWI_StartRead(
Twi *pTwi,
uint8_t address,
uint32_t iaddress,
uint8_t isize);
extern uint8_t TWI_ReadByte(Twi *pTwi);
extern void TWI_WriteByte(Twi *pTwi, uint8_t byte);
extern void TWI_StartWrite(
Twi *pTwi,
uint8_t address,
uint32_t iaddress,
uint8_t isize,
uint8_t byte);
extern uint8_t TWI_ByteReceived(Twi *pTwi);
extern uint8_t TWI_ByteSent(Twi *pTwi);
extern uint8_t TWI_TransferComplete(Twi *pTwi);
extern void TWI_EnableIt(Twi *pTwi, uint32_t sources);
extern void TWI_DisableIt(Twi *pTwi, uint32_t sources);
extern uint32_t TWI_GetStatus(Twi *pTwi);
extern uint32_t TWI_GetMaskedStatus(Twi *pTwi);
extern void TWI_SendSTOPCondition(Twi *pTwi);
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _TWI_ */

95
firmware/sam3s_examples_include/twid.h
View File

@@ -1,95 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _TWID_
#define _TWID_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*----------------------------------------------------------------------------
* Definition
*----------------------------------------------------------------------------*/
/** TWI driver is currently busy. */
#define TWID_ERROR_BUSY 1
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Types
*----------------------------------------------------------------------------*/
/** \brief TWI driver structure. Holds the internal state of the driver.*/
typedef struct _Twid
{
/** Pointer to the underlying TWI peripheral.*/
Twi *pTwi ;
/** Current asynchronous transfer being processed.*/
Async *pTransfer ;
} Twid;
/*----------------------------------------------------------------------------
* Export functions
*----------------------------------------------------------------------------*/
extern void TWID_Initialize( Twid *pTwid, Twi *pTwi ) ;
extern void TWID_Handler( Twid *pTwid ) ;
extern uint8_t TWID_Read(
Twid *pTwid,
uint8_t address,
uint32_t iaddress,
uint8_t isize,
uint8_t *pData,
uint32_t num,
Async *pAsync);
extern uint8_t TWID_Write(
Twid *pTwid,
uint8_t address,
uint32_t iaddress,
uint8_t isize,
uint8_t *pData,
uint32_t num,
Async *pAsync);
#ifdef __cplusplus
}
#endif
#endif //#ifndef TWID_H

133
firmware/sam3s_examples_include/usart.h
View File

@@ -1,133 +0,0 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \par Purpose
*
* This module provides several definitions and methods for using an USART
* peripheral.
*
* \par Usage
*
* -# Enable the USART peripheral clock in the PMC.
* -# Enable the required USART PIOs (see pio.h).
* -# Configure the UART by calling USART_Configure.
* -# Enable the transmitter and/or the receiver of the USART using
* USART_SetTransmitterEnabled and USART_SetReceiverEnabled.
* -# Send data through the USART using the USART_Write and
* USART_WriteBuffer methods.
* -# Receive data from the USART using the USART_Read and
* USART_ReadBuffer functions; the availability of data can be polled
* with USART_IsDataAvailable.
* -# Disable the transmitter and/or the receiver of the USART with
* USART_SetTransmitterEnabled and USART_SetReceiverEnabled.
*/
#ifndef _USART_
#define _USART_
/*------------------------------------------------------------------------------
* Headers
*------------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
/*------------------------------------------------------------------------------
* Definitions
*------------------------------------------------------------------------------*/
/** \section USART_mode USART modes
* This section lists several common operating modes for an USART peripheral.
*
* \b Modes
* - USART_MODE_ASYNCHRONOUS
* - USART_MODE_IRDA
*/
/** Basic asynchronous mode, i.e. 8 bits no parity.*/
#define USART_MODE_ASYNCHRONOUS (US_MR_CHRL_8_BIT | US_MR_PAR_NO)
/** IRDA mode*/
#define USART_MODE_IRDA (AT91C_US_USMODE_IRDA | AT91C_US_CHRL_8_BITS | AT91C_US_PAR_NONE | AT91C_US_FILTER)
/** SPI mode*/
#define AT91C_US_USMODE_SPIM 0xE
#define US_SPI_CPOL_0 (0x0<<16)
#define US_SPI_CPHA_0 (0x0<<8)
#define US_SPI_CPOL_1 (0x1<<16)
#define US_SPI_CPHA_1 (0x1<<8)
#define US_SPI_BPMODE_0 (US_SPI_CPOL_0|US_SPI_CPHA_1)
#define US_SPI_BPMODE_1 (US_SPI_CPOL_0|US_SPI_CPHA_0)
#define US_SPI_BPMODE_2 (US_SPI_CPOL_1|US_SPI_CPHA_1)
#define US_SPI_BPMODE_3 (US_SPI_CPOL_1|US_SPI_CPHA_0)
#ifdef __cplusplus
extern "C" {
#endif
/*------------------------------------------------------------------------------*/
/* Exported functions */
/*------------------------------------------------------------------------------*/
extern void USART_Configure( Usart *usart, uint32_t mode, uint32_t baudrate, uint32_t masterClock ) ;
extern uint32_t USART_GetStatus( Usart *usart ) ;
extern void USART_EnableIt( Usart *usart,uint32_t mode ) ;
extern void USART_DisableIt( Usart *usart,uint32_t mode ) ;
extern void USART_SetTransmitterEnabled( Usart *usart, uint8_t enabled ) ;
extern void USART_SetReceiverEnabled( Usart *usart, uint8_t enabled ) ;
extern void USART_Write( Usart *usart, uint16_t data, volatile uint32_t timeOut ) ;
extern uint8_t USART_WriteBuffer( Usart *usart, void *buffer, uint32_t size ) ;
extern uint16_t USART_Read( Usart *usart, volatile uint32_t timeOut ) ;
extern uint8_t USART_ReadBuffer( Usart *usart, void *buffer, uint32_t size ) ;
extern uint8_t USART_IsDataAvailable( Usart *usart ) ;
extern void USART_SetIrdaFilter(Usart *pUsart, uint8_t filter);
extern void USART_PutChar( Usart *usart, uint8_t c ) ;
extern uint32_t USART_IsRxReady( Usart *usart ) ;
extern uint8_t USART_GetChar( Usart *usart ) ;
#ifdef __cplusplus
}
#endif
#endif /* #ifndef _USART_ */