Structure build system to build for multiple boards/apps/environments

firmware/apps/cardem/Makefile

@@ -0,0 +1,3 @@
+C_FILES += $(C_LIBUSB_RT)
+
+C_FILES += card_emu.c ccid.c host_communication.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/cardem/main.c

@@ -0,0 +1,207 @@
+// FIXME: Copyright license here
+/*------------------------------------------------------------------------------
+ *          Headers
+ *------------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "simtrace.h"
+#include "utils.h"
+#include "req_ctx.h"
+#include "osmocom/core/timer.h"
+
+uint32_t g_unique_id[4];
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+typedef struct {
+	/* static initialization, called whether or not the usb config is active */
+	void (*configure) (void);
+	/* initialization function after the config was selected */
+	void (*init) (void);
+	/* de-initialization before selecting new config */
+	void (*exit) (void);
+	/* main loop content for given configuration */
+	void (*run) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart0_irq) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart1_irq) (void);
+} conf_func;
+
+static const conf_func config_func_ptrs[] = {
+	/* array slot 0 is empty, usb configs start at 1 */
+#ifdef HAVE_SNIFFER
+	[CFG_NUM_SNIFF] = {
+		.configure = Sniffer_configure,
+		.init = Sniffer_init,
+		.exit = Sniffer_exit,
+		.run = Sniffer_run,
+	},
+#endif
+#ifdef HAVE_CCID
+	[CFG_NUM_CCID] = {
+		.configure = CCID_configure,
+		.init = CCID_init,
+		.exit = CCID_exit,
+		.run = CCID_run,
+	},
+#endif
+#ifdef HAVE_CARDEM
+	[CFG_NUM_PHONE] = {
+		.configure = mode_cardemu_configure,
+		.init = mode_cardemu_init,
+		.exit = mode_cardemu_exit,
+		.run = mode_cardemu_run,
+		.usart0_irq = mode_cardemu_usart0_irq,
+		.usart1_irq = mode_cardemu_usart1_irq,
+	},
+#endif
+#ifdef HAVE_MITM
+	[CFG_NUM_MITM] = {
+		.configure = MITM_configure,
+		.init = MITM_init,
+		.exit = MITM_exit,
+		.run = MITM_run,
+	},
+#endif
+};
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+#if defined(HAVE_SNIFFER)
+static volatile enum confNum simtrace_config = CFG_NUM_SNIFF;
+#elif defined(HAVE_CARDEM)
+static volatile enum confNum simtrace_config = CFG_NUM_PHONE;
+#elif defined(HAVE_CCID)
+static volatile enum confNum simtrace_config = CFG_NUM_CCID;
+#endif
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+void USBDDriverCallbacks_ConfigurationChanged(uint8_t cfgnum)
+{
+	TRACE_INFO_WP("cfgChanged%d ", cfgnum);
+	simtrace_config = cfgnum;
+}
+
+void USART1_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart1_irq();
+}
+
+void USART0_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart0_irq();
+}
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	enum confNum last_simtrace_config = simtrace_config;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"SIMtrace2 firmware " GIT_VERSION " (C) 2010-2016 by Harald Welte\r\n"
+		"=============================================================================\r\n");
+
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	SIMtrace_USB_Initialize();
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 0
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	TRACE_INFO("calling configure of all configurations...\r\n");
+	for (i = 1; i < sizeof(config_func_ptrs) / sizeof(config_func_ptrs[0]);
+	     ++i) {
+		if (config_func_ptrs[i].configure)
+			config_func_ptrs[i].configure();
+	}
+
+	TRACE_INFO("calling init of config %u...\r\n", simtrace_config);
+	config_func_ptrs[simtrace_config].init();
+	last_simtrace_config = simtrace_config;
+
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		osmo_timers_prepare();
+		osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+		if (last_simtrace_config != simtrace_config) {
+			TRACE_INFO("USB config chg %u -> %u\r\n",
+				   last_simtrace_config, simtrace_config);
+			config_func_ptrs[last_simtrace_config].exit();
+			config_func_ptrs[simtrace_config].init();
+			last_simtrace_config = simtrace_config;
+		} else {
+			config_func_ptrs[simtrace_config].run();
+		}
+	}
+}

firmware/apps/dfu/Makefile

@@ -0,0 +1 @@
+C_FILES += $(C_LIBUSB_DFU)

firmware/apps/dfu/main.c

@@ -0,0 +1,107 @@
+#include "board.h"
+#include "utils.h"
+#include "usb/device/dfu/dfu.h"
+#include "usb/common/dfu/usb_dfu.h"
+#include "manifest.h"
+
+unsigned int g_unique_id[4];
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+#if 0
+void USBDDriverCallbacks_ConfigurationChanged(uint8_t cfgnum)
+{
+	TRACE_INFO_WP("cfgChanged%d ", cfgnum);
+	simtrace_config = cfgnum;
+}
+#endif
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	//board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	//req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"DFU bootloader %s for board %s (C) 2010-2017 by Harald Welte\r\n"
+		"=============================================================================\r\n",
+		manifest_revision, manifest_board);
+
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	//board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	USBDFU_Initialize(&dfu_descriptors);
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 0
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		//osmo_timers_prepare();
+		//osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+	}
+}

firmware/apps/triple_play/Makefile

@@ -0,0 +1,3 @@
+C_FILES += $(C_LIBUSB_RT)
+
+C_FILES += card_emu.c ccid.c host_communication.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/triple_play/main.c

@@ -0,0 +1,207 @@
+// FIXME: Copyright license here
+/*------------------------------------------------------------------------------
+ *          Headers
+ *------------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "simtrace.h"
+#include "utils.h"
+#include "req_ctx.h"
+#include "osmocom/core/timer.h"
+
+uint32_t g_unique_id[4];
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+typedef struct {
+	/* static initialization, called whether or not the usb config is active */
+	void (*configure) (void);
+	/* initialization function after the config was selected */
+	void (*init) (void);
+	/* de-initialization before selecting new config */
+	void (*exit) (void);
+	/* main loop content for given configuration */
+	void (*run) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart0_irq) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart1_irq) (void);
+} conf_func;
+
+static const conf_func config_func_ptrs[] = {
+	/* array slot 0 is empty, usb configs start at 1 */
+#ifdef HAVE_SNIFFER
+	[CFG_NUM_SNIFF] = {
+		.configure = Sniffer_configure,
+		.init = Sniffer_init,
+		.exit = Sniffer_exit,
+		.run = Sniffer_run,
+	},
+#endif
+#ifdef HAVE_CCID
+	[CFG_NUM_CCID] = {
+		.configure = CCID_configure,
+		.init = CCID_init,
+		.exit = CCID_exit,
+		.run = CCID_run,
+	},
+#endif
+#ifdef HAVE_CARDEM
+	[CFG_NUM_PHONE] = {
+		.configure = mode_cardemu_configure,
+		.init = mode_cardemu_init,
+		.exit = mode_cardemu_exit,
+		.run = mode_cardemu_run,
+		.usart0_irq = mode_cardemu_usart0_irq,
+		.usart1_irq = mode_cardemu_usart1_irq,
+	},
+#endif
+#ifdef HAVE_MITM
+	[CFG_NUM_MITM] = {
+		.configure = MITM_configure,
+		.init = MITM_init,
+		.exit = MITM_exit,
+		.run = MITM_run,
+	},
+#endif
+};
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+#if defined(HAVE_SNIFFER)
+static volatile enum confNum simtrace_config = CFG_NUM_SNIFF;
+#elif defined(HAVE_CARDEM)
+static volatile enum confNum simtrace_config = CFG_NUM_PHONE;
+#elif defined(HAVE_CCID)
+static volatile enum confNum simtrace_config = CFG_NUM_CCID;
+#endif
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+void USBDDriverCallbacks_ConfigurationChanged(uint8_t cfgnum)
+{
+	TRACE_INFO_WP("cfgChanged%d ", cfgnum);
+	simtrace_config = cfgnum;
+}
+
+void USART1_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart1_irq();
+}
+
+void USART0_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart0_irq();
+}
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	enum confNum last_simtrace_config = simtrace_config;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"SIMtrace2 firmware " GIT_REVISION " (C) 2010-2017 by Harald Welte\r\n"
+		"=============================================================================\r\n");
+
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	SIMtrace_USB_Initialize();
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 0
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	TRACE_INFO("calling configure of all configurations...\r\n");
+	for (i = 1; i < sizeof(config_func_ptrs) / sizeof(config_func_ptrs[0]);
+	     ++i) {
+		if (config_func_ptrs[i].configure)
+			config_func_ptrs[i].configure();
+	}
+
+	TRACE_INFO("calling init of config %u...\r\n", simtrace_config);
+	config_func_ptrs[simtrace_config].init();
+	last_simtrace_config = simtrace_config;
+
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		osmo_timers_prepare();
+		osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+		if (last_simtrace_config != simtrace_config) {
+			TRACE_INFO("USB config chg %u -> %u\r\n",
+				   last_simtrace_config, simtrace_config);
+			config_func_ptrs[last_simtrace_config].exit();
+			config_func_ptrs[simtrace_config].init();
+			last_simtrace_config = simtrace_config;
+		} else {
+			config_func_ptrs[simtrace_config].run();
+		}
+	}
+}