catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-26 02:08:32 +03:00
Code Issues Packages Projects Releases Wiki Activity

qmod: debug_cmd: Avoid 'Unknown command' for valid commands

Browse Source
This commit is contained in:
Harald Welte
2017-05-07 22:49:45 +02:00
parent f8c83a4d64
commit ed1efc5035
1 changed files with 53 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files

103
firmware/libboard/qmod/source/board_qmod.c
View File

@@ -114,11 +114,59 @@ static int write_hub_eeprom(void)
return 0; return 0;
} }
/* returns '1' in case we should break any endless loop */ static void board_exec_dbg_cmd_st12only(int ch)
void board_exec_dbg_cmd(int ch)
{ {
uint32_t addr, val; uint32_t addr, val;
/* functions below only work on primary (ST12) */
if (!qmod_sam3_is_12())
return;
switch (ch) {
case 'E':
write_hub_eeprom();
break;
case 'O':
printf("Setting PRTPWR_OVERRIDE\n\r");
PIO_Set(&pin_hubpwr_override);
break;
case 'o':
printf("Clearing PRTPWR_OVERRIDE\n\r");
PIO_Clear(&pin_hubpwr_override);
break;
case 'H':
printf("Clearing _HUB_RESET -> HUB_RESET high (inactive)\n\r");
PIO_Clear(&pin_hub_rst);
break;
case 'h':
/* high level drives transistor -> HUB_RESET low */
printf("Asserting _HUB_RESET -> HUB_RESET low (active)\n\r");
PIO_Set(&pin_hub_rst);
break;
case 'w':
if (PIO_GetOutputDataStatus(&pin_hub_rst) == 0)
printf("WARNING: attempting EEPROM access while HUB not in reset\n\r");
printf("Please enter EEPROM offset:\n\r");
UART_GetIntegerMinMax(&addr, 0, 255);
printf("Please enter EEPROM value:\n\r");
UART_GetIntegerMinMax(&val, 0, 255);
printf("Writing value 0x%02x to EEPROM offset 0x%02x\n\r", val, addr);
eeprom_write_byte(0x50, addr, val);
break;
case 'r':
printf("Please enter EEPROM offset:\n\r");
UART_GetIntegerMinMax(&addr, 0, 255);
printf("EEPROM[0x%02x] = 0x%02x\n\r", addr, eeprom_read_byte(0x50, addr));
break;
default:
printf("Unknown command '%c'\n\r", ch);
break;
}
}
/* returns '1' in case we should break any endless loop */
void board_exec_dbg_cmd(int ch)
{
switch (ch) { switch (ch) {
case '?': case '?':
printf("\t?\thelp\n\r"); printf("\t?\thelp\n\r");
@@ -176,55 +224,10 @@ void board_exec_dbg_cmd(int ch)
qmod_use_physical_sim(2, 0); qmod_use_physical_sim(2, 0);
break; break;
default: default:
if (!qmod_sam3_is_12()) { if (!qmod_sam3_is_12())
printf("Unknown command '%c'\n\r", ch); printf("Unknown command '%c'\n\r", ch);
return; else
} board_exec_dbg_cmd_st12only(ch);
break;
}
/* functions below only work on primary (ST12) */
if (!qmod_sam3_is_12())
return;
switch (ch) {
case 'E':
write_hub_eeprom();
break;
case 'O':
printf("Setting PRTPWR_OVERRIDE\n\r");
PIO_Set(&pin_hubpwr_override);
break;
case 'o':
printf("Clearing PRTPWR_OVERRIDE\n\r");
PIO_Clear(&pin_hubpwr_override);
break;
case 'H':
printf("Clearing _HUB_RESET -> HUB_RESET high (inactive)\n\r");
PIO_Clear(&pin_hub_rst);
break;
case 'h':
/* high level drives transistor -> HUB_RESET low */
printf("Asserting _HUB_RESET -> HUB_RESET low (active)\n\r");
PIO_Set(&pin_hub_rst);
break;
case 'w':
if (PIO_GetOutputDataStatus(&pin_hub_rst) == 0)
printf("WARNING: attempting EEPROM access while HUB not in reset\n\r");
printf("Please enter EEPROM offset:\n\r");
UART_GetIntegerMinMax(&addr, 0, 255);
printf("Please enter EEPROM value:\n\r");
UART_GetIntegerMinMax(&val, 0, 255);
printf("Writing value 0x%02x to EEPROM offset 0x%02x\n\r", val, addr);
eeprom_write_byte(0x50, addr, val);
break;
case 'r':
printf("Please enter EEPROM offset:\n\r");
UART_GetIntegerMinMax(&addr, 0, 255);
printf("EEPROM[0x%02x] = 0x%02x\n\r", addr, eeprom_read_byte(0x50, addr));
break;
default:
printf("Unknown command '%c'\n\r", ch);
break; break;
} }
} }