make sim switch board specific

the simtrace board uses a bus switch not used on qmod and owhw to
switch the SIM between physical and virtual

Change-Id: Ieaf2ed4761fc3e04f33f9aac5c04a768c9a6f71e

firmware/libboard/common/include/sim_switch.h

@@ -14,5 +14,13 @@
  */
 #pragma once
 
+/** switch card lines to use physical or emulated card
+ *  @param[in] nr card interface number (i.e. slot)
+ *  @param[in] physical which physical interface to switch to (e.g. 0: physical, 1: virtual)
+ *  @return 0 on success, negative else
+ */
 int sim_switch_use_physical(unsigned int nr, int physical);
+/** initialise card switching capabilities
+ *  @return number of switchable card interfaces
+ */
 int sim_switch_init(void);

firmware/libboard/qmod/source/sim_switch.c

@@ -0,0 +1,90 @@
+/* Code to switch between local (physical) and remote (emulated) SIM
+ *
+ * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
+ */
+#include "board.h"
+#include "trace.h"
+#include "led.h"
+#include "sim_switch.h"
+
+#ifdef PIN_SIM_SWITCH1
+static const Pin pin_conn_usim1 = {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
+#endif
+#ifdef PIN_SIM_SWITCH2
+static const Pin pin_conn_usim2 = {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
+#endif
+
+static int initialized = 0;
+
+int sim_switch_use_physical(unsigned int nr, int physical)
+{
+	const Pin *pin;
+	enum led led;
+
+	if (!initialized) {
+		TRACE_ERROR("Somebody forgot to call sim_switch_init()\r\n");
+		sim_switch_init();
+	}
+
+	TRACE_INFO("Modem %d: %s SIM\n\r", nr,
+		   physical ? "physical" : "virtual");
+
+	switch (nr) {
+#ifdef PIN_SIM_SWITCH1
+	case 0:
+		pin = &pin_conn_usim1;
+		led = LED_USIM1;
+		break;
+#endif
+#ifdef PIN_SIM_SWITCH2
+	case 1:
+		pin = &pin_conn_usim2;
+		led = LED_USIM2;
+		break;
+#endif
+	default:
+		TRACE_ERROR("Invalid SIM%u\n\r", nr);
+		return -1;
+	}
+
+	if (physical) {
+		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
+		PIO_Clear(pin);
+		led_blink(led, BLINK_ALWAYS_ON);
+	} else {
+		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
+		PIO_Set(pin);
+		led_blink(led, BLINK_ALWAYS_OFF);
+	}
+
+	return 0;
+}
+
+int sim_switch_init(void)
+{
+	int num_switch = 0;
+#ifdef PIN_SIM_SWITCH1
+	PIO_Configure(&pin_conn_usim1, 1);
+	num_switch++;
+#endif
+#ifdef PIN_SIM_SWITCH2
+	PIO_Configure(&pin_conn_usim2, 1);
+	num_switch++;
+#endif
+	initialized = 1;
+	return num_switch;
+}

firmware/libboard/simtrace/source/sim_switch.c

@@ -0,0 +1,54 @@
+/* Code to switch between local (physical) and remote (emulated) SIM
+ *
+ * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
+ * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
+ */
+#include "board.h"
+#include "trace.h"
+#include "led.h"
+#include "sim_switch.h"
+
+int sim_switch_use_physical(unsigned int nr, int physical)
+{
+	const Pin pin_sc = PIN_SC_SW_DEFAULT; // pin to control bus switch for VCC/RST/CLK signals
+	const Pin pin_io = PIN_IO_SW_DEFAULT; // pin to control bus switch for I/O signal
+
+	if (nr > 0) {
+		TRACE_ERROR("SIM interface for Modem %d can't be switched\r\n", nr);
+		return -1;
+	}
+
+	TRACE_INFO("Modem %u: %s SIM\n\r", nr, physical ? "physical" : "virtual");
+
+	if (physical) {
+		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
+		PIO_Set(&pin_sc);
+		PIO_Set(&pin_io);
+	} else {
+		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
+		PIO_Clear(&pin_sc);
+		PIO_Clear(&pin_io);
+	}
+
+	return 0;
+}
+
+int sim_switch_init(void)
+{
+	// the bus switch is already initialised
+	return 1; // SIMtrace hardware has only one switchable interface
+}