catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-18 22:38:32 +03:00
Code Issues Packages Projects Releases Wiki Activity

USB: increase USB reset time

Browse Source 
USB reset can be signaled by pulling low USB D+ for at least 10 ms,
according to the USB specification. This force a re-enumeration.
This time is increased to 20 ms to work with more USB HUBs.

Some SAM3S based board have external D+ pull-up mechanism (such as
SIMtrace) which needs to be used to pull D+ low.
This is a legacy mechanism from SAM7S history.
This mechanism is not required anymore on the SAM3S, and the qmod
does not use it. When the USB HAL is suspended, the transceiver is
disabled, causing D+ and D- to be pulled low. Then the HAL is activated
again. This is particularly required when DFU is started (and
enumerated), and after flashing the SAM3S switched to the main
application (without reset), so it can properly re-enumerate.

This board difference is now defined on the board header.

Change-Id: I9b58d8101c2fcf5595026b675728826af26127a3
This commit is contained in:
Kévin Redon
2018-08-06 17:57:20 +02:00
parent 9547e419eb
commit ff3d84922d
4 changed files with 23 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
firmware/libboard/common/include/board_common.h
View File

@@ -114,15 +114,8 @@
#define SIM_PWEN PIO_PA5
#define VCC_FWD PIO_PA26
/** Pin configuration to control USB pull-up on D+
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
*/
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
// Board has UDP controller
#define BOARD_USB_UDP
// D+ has external pull-up
#define BOARD_USB_PULLUP_EXTERNAL
#define BOARD_USB_DFU
#define BOARD_DFU_BOOT_SIZE (16 * 1024)