Add api call osmo_st2_cardem_request_config2(struct cardemu_usb_msg_config *)
which contains a full cardemu_usb_msg_config.
Related: SYS#6946
Change-Id: Iacde63e667472a85a5f18cb4ca99dcfa1a84dd59
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.
Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.
Trace was also tested and appears to work as expected.
Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
libosmo-simtrace2 traditionally had only supported blocking, synchronous
I/O, while other osmocom programs such as remsim-client used
asynchronous USB I/O.
Using async USB I/O for IRQ + IN transfers while using blocking I/O for
OUT transfers doesn't seem to work reliably, so we have to offer a way
to perform the OUT transfers generated within libosmo-simtrace2 in async
mode.
Change-Id: Ib8939bdb7f533cd20a34a30a97f12b782b9816c2
In Change-Id I7cdd3f9171dbed45de0089defe29d2b59044bd84 we introduced
firmware support for SIMTRACE_MSGT_BD_CEMU_CONFIG. The respective
host part was so far only implemented in osmo-remsim-client-st2,
but not in libosmo-simtrace2. Let's fix that.
Change-Id: Ia4822d360a271d2ce9725f761cb95de58663ac3b
the code we used to have in libusb_util.c has been migrated to
libosmousb, a new part of libosmocore.git. Let's remove our historic
copy and use the new shared library instead.
Change-Id: Ib588c08f873c4da8f3a02815ee2767674a6a5061
The printing was always only done at the end of osmo_apdu_segment_in(),
so let's leave the decision up to the user if he wants to print the
state at every iteration or not.
We now provide osmo_apdu_dump_context_buf() to the user so he can obtain
a string representation of the internal state for logging at any time he
requires.
Change-Id: Id3e3cf1605dec84077b158c1c5715f8eef2641d5
