We need to send zero-length packets on bulk endpoints whenever the
transfer size is exactly a multiple of the wMaxPacketSize.
See USB 2.0 Specification Section 5.8.3 titled "Bulk Transfer Packet
Size constraints."
Change-Id: Ice3842399d5a5c4a18383860f81074497c6e7c9b
Closes: OS#4331
the USB trace now respects the global setting.
the verbosity is also decreased, not showing USB activity unless
debugging.
this also saves some space.
the reset cause is now printed.
the strings increase the bootloader size, but it already exceeded
the 16 kB limit when trace level is set to info.
Change-Id: I9ba08d4bb4f188f6e7a202ea86acb7a42a2054f3
moving the define after the header fixes the following warning:
from ./atmel_softpack_libraries/libchip_sam3s/source/exceptions.c:46:
libcommon/include/stdio.h:63:12: warning: redundant redeclaration of 'printf_sync' [-Wredundant-decls]
signed int printf_sync(const char *pFormat, ...);
^~~~~~~~~~~
./atmel_softpack_libraries/libchip_sam3s/source/exceptions.c:45:16: note: previous declaration of 'printf_sync' was here
#define printf printf_sync
^~~~~~~~~~~
libcommon/include/stdio.h:51:12: note: in expansion of macro 'printf'
signed int printf(const char *pFormat, ...);
Change-Id: I21a8de325e8f8b91297dd157f2d6a0f64434bb28
The default ISR (particularly the HardFault handler) print information,
but this information was not displayed on the console because the UART
IRQ is lower than some default blocking IRQ.
Allowing to set synchronous transfer corrects this.
The underlying Atmel exception library had to be modified to use the
synchronous output.
Making UART_PutChar always synchronous when called from an ISR is not
desired because we use TRACE_ macros is some ISR. The synchronous
output must be set explicitly.
Change-Id: I1b4ace5185cf2dc32684934ed12bf6a8682e9bad
It is utterly unacceptable that Atmel is shipping example code in 2011,
which doesn't support parts that are shipped still in 2016. They would
have had five years to fix their code to implement the chip errata :(
We need to refer to g_dfu as a pointer from all code. In DFU mode, it
gets assigned to the address of _g_dfu, which is placed by the linker
script at the start of RAM. In runtime mode, the pointer is statically
defined to point at the start of RAM. The linker script for the runtime
(dfu environment) is adjusted to save the first 32 bytes for the _g_dfu
structure.
This way we can easily check with 'diff' for differences in our code and
Atmel softpack. Also, this layout is more suitable for building various
different firmware images (e.g. factory-test, dfu-loader, main
application) for a variety of different boards (simtrace, owhw, qmod).
