the */usb_strings.txt files always assumed that the first line is the
manufacturer string, followed by the product string in the second line.
However, the enum strDescNum had it the other way around. Let's fix it
by adjusting the enum to reality.
Fixes: SYS#3591
msg->l2h should always point at the first byte of the header after the
generic simtrace header. For some reason this doesn't work if used
globally, but it is required for the MSGC_MODEM messages to be
interpreted correctly.
The current protocol was card-emulation specific. The new protocol is
generic/flexible enough to accommodate both tracing and card emulation,
as well as modem control and other future extensions.
We now generalize the USB communiction and abandon the 'req_ctx'
structure inherited from openpcd. Instead we use the libosmocore 'msgb'
structure to handle incoming and outgoing USB tranfers. We also use
linuxlist-based msgb-queues for each endpoint.
This way, host code can dynamically detect which interface supports
which functionality.
The related #defines should be moved to a header file that's shared with
the host application code.
Actually, at device level we want to specify 0, so we can select
individual Class/Subclass values at Interface values.
Table 9-8 of the USB2 Specification is quite clear about this.
When initializing the TC blocks, let's only configure the GPIO pins TCLK
and TIOB, and not the unused TIOA pin. That pin is actually used for
(separate) different functions in both qmod and owhw.
* we now actually route the EP0 control requests in DFU mode to the
correct handler (weak linker symbols are tricky)
* we now actually call code to read/write data from/to RAM/FLASH
This way we can easily check with 'diff' for differences in our code and
Atmel softpack. Also, this layout is more suitable for building various
different firmware images (e.g. factory-test, dfu-loader, main
application) for a variety of different boards (simtrace, owhw, qmod).
