This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.
Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.
Trace was also tested and appears to work as expected.
Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
See Help->About Wireshark->Folders tab,the usual place this should go is
~/.local/lib/wireshark/plugins
Hot reload possible after editing using Analyze->Reload Lua Plugins
Change-Id: I360ab522dabc3a378969df36efd3b48fc4cade3c
This reverts commit baa62777c8 which
deleted simtrace-cardem builds to prevent them from being published.
Change-Id: I63fd4bea2985fcc87f202d8b69a4f24661858185
We should use service-aliases and not the primary host name, as
that makes migration between machines hard.
Change-Id: I34b18457268ae6f8ae3a053c5424210074a4d52e
the SIMtrace board does not support the current card emulation
application because this uses a timer counter to handle the
timeouts, but on the SIMtrace board this is not connected to the
CLK signal
Change-Id: Idd09ea534179f0ede705573e1373dbd045c9828a
Call the script from the proper directory, and cd into the topdir on top
of the script. Fixes:
/build/contrib/jenkins.sh: line 71: contrib/prepare_upload.sh: No such file or directory
Related: OS#4413
Change-Id: Icbfaa5579aab887830ca90b24a2e322df8d98f4f
Don't create copies of firmware files with version strings appended in
the normal build. Only do this before uploading the firmware files.
I have verified that "make" before this change and
"make; contrib/prepare_upload.sh" after produce the same files.
Close: OS#4413
Change-Id: I118a4ff397a178281c26a6b98112fa66b6f049ab
cardem on the st2 has been broken forever and still does not work, so
stop uploading cardem binaries
Change-Id: I33828f799d41386afb3f8dcd9bb510902877e03f
this python script lists the SIMtrace 2 devices connected to USB
and will flash the latest version of the application (if necessary).
it requires pyusb and dfu-util.
it is intended for end users so they don't need to read the length
and error-prone instructions provided in the wiki.
TODO:
- support updating bootloader (once dfu-ram image exists)
- use python implementation of dfu-util to be python only
Change-Id: I3ebe0f54b6e3b7b45478603cc0a5b56e87b1f461
the jenkins script will now upload the versioned output to the
all directory, and a copy named "latest" in the latest directory.
Change-Id: I70114ef8414779e369da5cbf945854c9ace3464e
the upload failed because after the firmware were built (make),
they where removed (make clean).
now they are removed only after the upload.
Change-Id: Ie4421a6fa9207eb541107de9c14f265626f6be96
the script argument was not saved in the publish variable used later
to decide if publishing/uploading is needed.
Change-Id: Ic768a8e96e5e4d72acf3979da1412d683f79ec55
firmware binaries should be uploaded to
https://ftp.osmocom.org/binaries/simtrace2/firmware/
this directory wiki be documented in the SIMtrace 2 wiki for users
to get the latest firmware images without having to cross-compile
themselves.
Change-Id: I589531f59e54a0997b012bdd91e3bef9f847f517
