the reset/ATR handling has been heavily updated/fixed.
instead of using the timer counter peripheral to handle
the waiting time and corresponding timeout, the USART peripheral
internal timeout mechanism is used.
this is particularly important for the SIMtrace board since the
clock signal is not connected to the timer counter.
thus this change adds card emulation support for SIMtrace boards.
Fi and Di have been properly rename to F and D since the "i"
stands only for an "indicated" value, not the actual value.
this does not change the USB protocol (the variable have just been
renamed).
additional variables store more information about the card
capabilities
NOTE: it has only be tested for the SIMtrace board
Change-Id: Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5
the SIMtrace board does not support the current card emulation
application because this uses a timer counter to handle the
timeouts, but on the SIMtrace board this is not connected to the
CLK signal
Change-Id: Idd09ea534179f0ede705573e1373dbd045c9828a
the upload failed because after the firmware were built (make),
they where removed (make clean).
now they are removed only after the upload.
Change-Id: Ie4421a6fa9207eb541107de9c14f265626f6be96
the script argument was not saved in the publish variable used later
to decide if publishing/uploading is needed.
Change-Id: Ic768a8e96e5e4d72acf3979da1412d683f79ec55
firmware binaries should be uploaded to
https://ftp.osmocom.org/binaries/simtrace2/firmware/
this directory wiki be documented in the SIMtrace 2 wiki for users
to get the latest firmware images without having to cross-compile
themselves.
Change-Id: I589531f59e54a0997b012bdd91e3bef9f847f517
