Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.
Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.
Trace was also tested and appears to work as expected.
Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
In the end we want to share most of this, irrespective of the "APP".
Let's avoid unnecessary differences.
Change-Id: Icf063d4ca79edf66ffbe8e87a915deb77dec478a
This unifies the printing of the welcome banner, and it also ensures
that all modes print all information (serial number, reset cause).
Furthermore the APP and BOARD #defines from the make environment are
also printed.
Change-Id: I7e6bc05cee4b9ec0fd9a05dc90ce0b26a5763e5a
There have been tons of format-string related bugs in our code which
we never discovered due to disabling -Wformat. Let's fix that.
Change-Id: I5ec466361bcc526fac1f4897673264ee5af3458b
a lot of the procedures are done in ISRs, but the watchdog is only
reset in the main loop.
this causes frequent reset, particularly at the beginning were
states have to the initialized.
Change-Id: Iad364444fca9d18f9a8cf47d5e0840ccd7bac2ef
This is required to make python pexpect.fdexpect happy, as it
requires that all characters are echo-ed back in order to detect
when the output of a given command starts.
Change-Id: I73b24e43f6c8b86a2766aba67d8307c184448aa0
the curent local copies of libosmocore headers + source is a temporary
hack anyway. We should instead rely on a system-wide install of
libosmocore cross-compiled for arm-none-eabi. But leave that as a
second (later) step beyond this patch.
Change-Id: Ia63fd842d45a2b404233b4326050e7eda0604cf0
We now generalize the USB communiction and abandon the 'req_ctx'
structure inherited from openpcd. Instead we use the libosmocore 'msgb'
structure to handle incoming and outgoing USB tranfers. We also use
linuxlist-based msgb-queues for each endpoint.
This makes sure that we'll re-enumerate on the USB, as a CPU reset
apparently doesn't automatically release the pull-up and notify the hub
that we were gone?
For some strange reason my output is garbled in both the 'screen' and
'cu' teerminal programs and 'raw' terminal (stty) mode. I fail to
understand why, but let's simply adjust the code as needed for now.
