Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
dfu flashing the ST12 was easy, but i was never able to
get ST34 into dfu mode. Changing the firmware so it resets
itself just like the octsim instead of starting a timer and
waiting for a reset from the host made it work every time for me.
Change-Id: Ida636ec925f40d6d56551f170150181350d03bbd
now both partitions (bootloader and application) use a commonly
defined memory location to shared the DFU state (which includes
the magic value to know which part to start), instead of using
a hard coded value.
the bootloader size has now also been restricted to 16 kB.
this limitation is enforced so to not be able to create larger
images, which could be corrupted when flashing the application.
bootloader and application flashing have been successfully tested
on qmod st12 and st34.
Change-Id: I204bed7e9391602672ed894decec1fc12e879275
e.g. in CCID mode we need to treat class-specific control requests,
and we want to do this in a way how the CCID code doesn't need to
understand about DFU.
We cannoy simply use the DFU runtime descriptor of the DFU mode, but we
have to use the descriptor of the specific currently-selected runtime
configuration. Let's iterate over the descriptors of a configuration
and find the DFU runtime descriptor in it.
We need to refer to g_dfu as a pointer from all code. In DFU mode, it
gets assigned to the address of _g_dfu, which is placed by the linker
script at the start of RAM. In runtime mode, the pointer is statically
defined to point at the start of RAM. The linker script for the runtime
(dfu environment) is adjusted to save the first 32 bytes for the _g_dfu
structure.
* we now actually route the EP0 control requests in DFU mode to the
correct handler (weak linker symbols are tricky)
* we now actually call code to read/write data from/to RAM/FLASH
