the USB trace now respects the global setting.
the verbosity is also decreased, not showing USB activity unless
debugging.
this also saves some space.
the reset cause is now printed.
the strings increase the bootloader size, but it already exceeded
the 16 kB limit when trace level is set to info.
Change-Id: I9ba08d4bb4f188f6e7a202ea86acb7a42a2054f3
now both partitions (bootloader and application) use a commonly
defined memory location to shared the DFU state (which includes
the magic value to know which part to start), instead of using
a hard coded value.
the bootloader size has now also been restricted to 16 kB.
this limitation is enforced so to not be able to create larger
images, which could be corrupted when flashing the application.
bootloader and application flashing have been successfully tested
on qmod st12 and st34.
Change-Id: I204bed7e9391602672ed894decec1fc12e879275
as for the main application firmware, the DFU bootloader firmware
now also has the unique chip ID as iSerial in the USB description,
and an additional empty USB configuration indicates the firmware
version (e.g. DFU bootloader version).
these are only visible when the device is in DFU mode.
Change-Id: I11a2cd8079fda374d816da180f39f1c33d10af60
Using the USBDFU_OverrideEnterDFU() function, a board/application can
define extra conditions when the system should boot in DFU mode, even if
it was not explicitly switched to DFU mode from the application.
The app/dfu/main.c uses this mechanism to boot into DFU mode if the
stack + reset vector addresses are not plausible (i.e. some random junk
appears to be flashed in the application partition) or if the user
places a jumper accross the RxD+TxD lines of the debug UART. The idea
is that the system can be recovered by placing this jumper and then
re-installing the application from DFU.
It is utterly unacceptable that Atmel is shipping example code in 2011,
which doesn't support parts that are shipped still in 2016. They would
have had five years to fix their code to implement the chip errata :(
We need to refer to g_dfu as a pointer from all code. In DFU mode, it
gets assigned to the address of _g_dfu, which is placed by the linker
script at the start of RAM. In runtime mode, the pointer is statically
defined to point at the start of RAM. The linker script for the runtime
(dfu environment) is adjusted to save the first 32 bytes for the _g_dfu
structure.
* we now actually route the EP0 control requests in DFU mode to the
correct handler (weak linker symbols are tricky)
* we now actually call code to read/write data from/to RAM/FLASH
