catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-17 13:48:32 +03:00
Code Issues Packages Projects Releases Wiki Activity
Files
02712376dfbadd81bd89b639a60fbcd1d300e4b8
simtrace2/firmware/libcommon/source/usb.c
Kévin Redon ede87e067d USB: place version string in interface 
previously the version string was in the iConfiguration field of a
dedicated USB configuration.
this configuration had no interface, but the USB specification
requires at least one interface.
an interface has been added to this configuration.
the version string is now in the iInterface field, and the
iConfiguration field contains "firmware version".
the USB specification does not require an end-point, and none are
present.

Change-Id: I99361e313979711f4f45ad424a52faa3ddd7c558
2019-08-13 17:03:23 +02:00

740 lines
26 KiB
C
Raw Blame History

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
* Copyright (c) 2018-2019, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "board.h"
#include "simtrace.h"
#include "simtrace_usb.h"
#include "utils.h"
#include "USBD_HAL.h"
#include <cciddriverdescriptors.h>
#include <usb/common/dfu/usb_dfu.h>
#include <usb/device/dfu/dfu.h>
/*------------------------------------------------------------------------------
* USB String descriptors
*------------------------------------------------------------------------------*/
#include "usb_strings_generated.h"
// the index of the strings (must match the order in usb_strings.txt)
enum strDescNum {
// static strings from usb_strings
MANUF_STR = 1,
PRODUCT_STRING,
SNIFFER_CONF_STR,
CCID_CONF_STR,
PHONE_CONF_STR,
MITM_CONF_STR,
CARDEM_USIM1_INTF_STR,
CARDEM_USIM2_INTF_STR,
CARDEM_USIM3_INTF_STR,
CARDEM_USIM4_INTF_STR,
// runtime strings
SERIAL_STR,
VERSION_CONF_STR,
VERSION_STR,
// count
STRING_DESC_CNT
};
/** array of static (from usb_strings) and runtime (serial, version) USB strings
*/
static const unsigned char *usb_strings_extended[ARRAY_SIZE(usb_strings) + 3];
/* USB string for the serial (using 128-bit device ID) */
static unsigned char usb_string_serial[] = {
USBStringDescriptor_LENGTH(32),
USBGenericDescriptor_STRING,
USBStringDescriptor_UNICODE('0'),
USBStringDescriptor_UNICODE('0'),
USBStringDescriptor_UNICODE('1'),
USBStringDescriptor_UNICODE('1'),
USBStringDescriptor_UNICODE('2'),
USBStringDescriptor_UNICODE('2'),
USBStringDescriptor_UNICODE('3'),
USBStringDescriptor_UNICODE('3'),
USBStringDescriptor_UNICODE('4'),
USBStringDescriptor_UNICODE('4'),
USBStringDescriptor_UNICODE('5'),
USBStringDescriptor_UNICODE('5'),
USBStringDescriptor_UNICODE('6'),
USBStringDescriptor_UNICODE('6'),
USBStringDescriptor_UNICODE('7'),
USBStringDescriptor_UNICODE('7'),
USBStringDescriptor_UNICODE('8'),
USBStringDescriptor_UNICODE('8'),
USBStringDescriptor_UNICODE('9'),
USBStringDescriptor_UNICODE('9'),
USBStringDescriptor_UNICODE('a'),
USBStringDescriptor_UNICODE('a'),
USBStringDescriptor_UNICODE('b'),
USBStringDescriptor_UNICODE('b'),
USBStringDescriptor_UNICODE('c'),
USBStringDescriptor_UNICODE('c'),
USBStringDescriptor_UNICODE('d'),
USBStringDescriptor_UNICODE('d'),
USBStringDescriptor_UNICODE('e'),
USBStringDescriptor_UNICODE('e'),
USBStringDescriptor_UNICODE('f'),
USBStringDescriptor_UNICODE('f'),
};
/* USB string for the version */
static const unsigned char usb_string_version_conf[] = {
USBStringDescriptor_LENGTH(16),
USBGenericDescriptor_STRING,
USBStringDescriptor_UNICODE('f'),
USBStringDescriptor_UNICODE('i'),
USBStringDescriptor_UNICODE('r'),
USBStringDescriptor_UNICODE('m'),
USBStringDescriptor_UNICODE('w'),
USBStringDescriptor_UNICODE('a'),
USBStringDescriptor_UNICODE('r'),
USBStringDescriptor_UNICODE('e'),
USBStringDescriptor_UNICODE(' '),
USBStringDescriptor_UNICODE('v'),
USBStringDescriptor_UNICODE('e'),
USBStringDescriptor_UNICODE('r'),
USBStringDescriptor_UNICODE('s'),
USBStringDescriptor_UNICODE('i'),
USBStringDescriptor_UNICODE('o'),
USBStringDescriptor_UNICODE('n'),
};
static const char git_version[] = GIT_VERSION;
static unsigned char usb_string_version[2 + ARRAY_SIZE(git_version) * 2 - 2];
/*------------------------------------------------------------------------------
* USB Device descriptors
*------------------------------------------------------------------------------*/
#ifdef HAVE_SNIFFER
typedef struct _SIMTraceDriverConfigurationDescriptorSniffer {
/** Standard configuration descriptor. */
USBConfigurationDescriptor configuration;
USBInterfaceDescriptor sniffer;
USBEndpointDescriptor sniffer_dataOut;
USBEndpointDescriptor sniffer_dataIn;
USBEndpointDescriptor sniffer_interruptIn;
DFURT_IF_DESCRIPTOR_STRUCT;
} __attribute__ ((packed)) SIMTraceDriverConfigurationDescriptorSniffer;
static const SIMTraceDriverConfigurationDescriptorSniffer
configurationDescriptorSniffer = {
/* Standard configuration descriptor */
.configuration = {
.bLength = sizeof(USBConfigurationDescriptor),
.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
.wTotalLength = sizeof(SIMTraceDriverConfigurationDescriptorSniffer),
.bNumInterfaces = 1+DFURT_NUM_IF,
.bConfigurationValue = CFG_NUM_SNIFF,
.iConfiguration = SNIFFER_CONF_STR,
.bmAttributes = USBD_BMATTRIBUTES,
.bMaxPower = USBConfigurationDescriptor_POWER(100),
},
/* Communication class interface standard descriptor */
.sniffer = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = USB_CLASS_PROPRIETARY,
.bInterfaceSubClass = SIMTRACE_SNIFFER_USB_SUBCLASS,
.bInterfaceProtocol = 0,
.iInterface = SNIFFER_CONF_STR,
},
/* Bulk-OUT endpoint standard descriptor */
.sniffer_dataOut = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_OUT,
SIMTRACE_USB_EP_CARD_DATAOUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0,
},
/* Bulk-IN endpoint descriptor */
.sniffer_dataIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_USB_EP_CARD_DATAIN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0,
},
// Notification endpoint descriptor
.sniffer_interruptIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_USB_EP_CARD_INT),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10,
},
DFURT_IF_DESCRIPTOR(1, 0),
};
#endif /* HAVE_SNIFFER */
#ifdef HAVE_CCID
static const CCIDDriverConfigurationDescriptors configurationDescriptorCCID = {
// Standard USB configuration descriptor
{
.bLength = sizeof(USBConfigurationDescriptor),
.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
.wTotalLength = sizeof(CCIDDriverConfigurationDescriptors),
.bNumInterfaces = 1+DFURT_NUM_IF,
.bConfigurationValue = CFG_NUM_CCID,
.iConfiguration = CCID_CONF_STR,
.bmAttributes = BOARD_USB_BMATTRIBUTES,
.bMaxPower = USBConfigurationDescriptor_POWER(100),
},
// CCID interface descriptor
// Table 4.3-1 Interface Descriptor
// Interface descriptor
{
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = SMART_CARD_DEVICE_CLASS,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = CCID_CONF_STR,
},
{
.bLength = sizeof(CCIDDescriptor),
.bDescriptorType = CCID_DECRIPTOR_TYPE,
.bcdCCID = CCID1_10, // CCID version
.bMaxSlotIndex = 0, // 1 slot
.bVoltageSupport = VOLTS_3_0,
.dwProtocols = (1 << PROTOCOL_TO),
.dwDefaultClock = 3580,
.dwMaximumClock = 3580,
.bNumClockSupported = 0,
.dwDataRate = 9600,
.dwMaxDataRate = 9600,
.bNumDataRatesSupported = 0,
.dwMaxIFSD = 0xfe,
.dwSynchProtocols = 0,
.dwMechanical = 0,
.dwFeatures = CCID_FEATURES_AUTO_CLOCK | CCID_FEATURES_AUTO_BAUD |
CCID_FEATURES_AUTO_PCONF | CCID_FEATURES_AUTO_PNEGO |
CCID_FEATURES_EXC_TPDU,
.dwMaxCCIDMessageLength = 271, /* For extended APDU
level the value shall
be between 261 + 10 */
.bClassGetResponse = 0xFF, // Echoes the class of the APDU
.bClassEnvelope = 0xFF, // Echoes the class of the APDU
.wLcdLayout = 0, // wLcdLayout: no LCD
.bPINSupport = 0, // bPINSupport: No PIN
.bMaxCCIDBusySlots = 1,
},
// Bulk-OUT endpoint descriptor
{
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT,
CCID_EPT_DATA_OUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0x00,
},
// Bulk-IN endpoint descriptor
{
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN,
CCID_EPT_DATA_IN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS),
.bInterval = 0x00,
},
// Notification endpoint descriptor
{
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN,
CCID_EPT_NOTIFICATION),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10,
},
DFURT_IF_DESCRIPTOR(1, 0),
};
#endif /* HAVE_CCID */
#ifdef HAVE_CARDEM
/* SIM card emulator */
typedef struct _SIMTraceDriverConfigurationDescriptorPhone {
/* Standard configuration descriptor. */
USBConfigurationDescriptor configuration;
USBInterfaceDescriptor phone;
USBEndpointDescriptor phone_dataOut;
USBEndpointDescriptor phone_dataIn;
USBEndpointDescriptor phone_interruptIn;
#ifdef CARDEMU_SECOND_UART
USBInterfaceDescriptor usim2;
USBEndpointDescriptor usim2_dataOut;
USBEndpointDescriptor usim2_dataIn;
USBEndpointDescriptor usim2_interruptIn;
#endif
DFURT_IF_DESCRIPTOR_STRUCT;
} __attribute__ ((packed)) SIMTraceDriverConfigurationDescriptorPhone;
static const SIMTraceDriverConfigurationDescriptorPhone
configurationDescriptorPhone = {
/* Standard configuration descriptor */
.configuration = {
.bLength = sizeof(USBConfigurationDescriptor),
.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
.wTotalLength = sizeof(SIMTraceDriverConfigurationDescriptorPhone),
#ifdef CARDEMU_SECOND_UART
.bNumInterfaces = 2+DFURT_NUM_IF,
#else
.bNumInterfaces = 1+DFURT_NUM_IF,
#endif
.bConfigurationValue = CFG_NUM_PHONE,
.iConfiguration = PHONE_CONF_STR,
.bmAttributes = USBD_BMATTRIBUTES,
.bMaxPower = USBConfigurationDescriptor_POWER(100)
},
/* Communication class interface standard descriptor */
.phone = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = USB_CLASS_PROPRIETARY,
.bInterfaceSubClass = SIMTRACE_CARDEM_USB_SUBCLASS,
.bInterfaceProtocol = 0,
.iInterface = CARDEM_USIM1_INTF_STR,
},
/* Bulk-OUT endpoint standard descriptor */
.phone_dataOut = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_OUT,
SIMTRACE_CARDEM_USB_EP_USIM1_DATAOUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0 /* Must be 0 for full-speed bulk endpoints */
},
/* Bulk-IN endpoint descriptor */
.phone_dataIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_CARDEM_USB_EP_USIM1_DATAIN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0 /* Must be 0 for full-speed bulk endpoints */
},
/* Notification endpoint descriptor */
.phone_interruptIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_CARDEM_USB_EP_USIM1_INT),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10
},
#ifdef CARDEMU_SECOND_UART
/* Communication class interface standard descriptor */
.usim2 = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = USB_CLASS_PROPRIETARY,
.bInterfaceSubClass = SIMTRACE_CARDEM_USB_SUBCLASS,
.bInterfaceProtocol = 0,
.iInterface = CARDEM_USIM2_INTF_STR,
},
/* Bulk-OUT endpoint standard descriptor */
.usim2_dataOut = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_OUT,
SIMTRACE_CARDEM_USB_EP_USIM2_DATAOUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0 /* Must be 0 for full-speed bulk endpoints */
}
,
/* Bulk-IN endpoint descriptor */
.usim2_dataIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_CARDEM_USB_EP_USIM2_DATAIN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0 /* Must be 0 for full-speed bulk endpoints */
},
/* Notification endpoint descriptor */
.usim2_interruptIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_CARDEM_USB_EP_USIM2_INT),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10,
},
DFURT_IF_DESCRIPTOR(2, 0),
#else
DFURT_IF_DESCRIPTOR(1, 0),
#endif
};
#endif /* HAVE_CARDEM */
#ifdef HAVE_MITM
typedef struct _SIMTraceDriverConfigurationDescriptorMITM {
/* Standard configuration descriptor. */
USBConfigurationDescriptor configuration;
USBInterfaceDescriptor simcard;
/// CCID descriptor
CCIDDescriptor ccid;
/// Bulk OUT endpoint descriptor
USBEndpointDescriptor simcard_dataOut;
/// Bulk IN endpoint descriptor
USBEndpointDescriptor simcard_dataIn;
/// Interrupt OUT endpoint descriptor
USBEndpointDescriptor simcard_interruptIn;
USBInterfaceDescriptor phone;
USBEndpointDescriptor phone_dataOut;
USBEndpointDescriptor phone_dataIn;
USBEndpointDescriptor phone_interruptIn;
DFURT_IF_DESCRIPTOR_STRUCT;
} __attribute__ ((packed)) SIMTraceDriverConfigurationDescriptorMITM;
static const SIMTraceDriverConfigurationDescriptorMITM
configurationDescriptorMITM = {
/* Standard configuration descriptor */
.configuration = {
.bLength = sizeof(USBConfigurationDescriptor),
.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
.wTotalLength = sizeof(SIMTraceDriverConfigurationDescriptorMITM),
.bNumInterfaces = 2+DFURT_NUM_IF,
.bConfigurationValue = CFG_NUM_MITM,
.iConfiguration = MITM_CONF_STR,
.bmAttributes = USBD_BMATTRIBUTES,
.bMaxPower = USBConfigurationDescriptor_POWER(100),
},
// CCID interface descriptor
// Table 4.3-1 Interface Descriptor
// Interface descriptor
.simcard = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = SMART_CARD_DEVICE_CLASS,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = CCID_CONF_STR,
},
.ccid = {
.bLength = sizeof(CCIDDescriptor),
.bDescriptorType = CCID_DECRIPTOR_TYPE,
.bcdCCID = CCID1_10, // CCID version
.bMaxSlotIndex = 0, // 1 slot
.bVoltageSupport = VOLTS_3_0,
.dwProtocols = (1 << PROTOCOL_TO),
.dwDefaultClock = 3580,
.dwMaximumClock = 3580,
.bNumClockSupported = 0,
.dwDataRate = 9600,
.dwMaxDataRate = 9600,
.bNumDataRatesSupported = 0,
.dwMaxIFSD = 0xfe,
.dwSynchProtocols = 0,
.dwMechanical = 0,
.dwFeatures = CCID_FEATURES_AUTO_CLOCK | CCID_FEATURES_AUTO_BAUD |
CCID_FEATURES_AUTO_PCONF | CCID_FEATURES_AUTO_PNEGO |
CCID_FEATURES_EXC_TPDU,
.dwMaxCCIDMessageLength = 271, /* For extended APDU
level the value shall
be between 261 + 10 */
.bClassGetResponse = 0xFF, // Echoes the class of the APDU
.bClassEnvelope = 0xFF, // Echoes the class of the APDU
.wLcdLayout = 0, // wLcdLayout: no LCD
.bPINSupport = 0, // bPINSupport: No PIN
.bMaxCCIDBusySlots = 1,
},
// Bulk-OUT endpoint descriptor
.simcard_dataOut = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_OUT,
CCID_EPT_DATA_OUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0x00,
},
// Bulk-IN endpoint descriptor
.simcard_dataIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN,
CCID_EPT_DATA_IN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0x00,
},
// Notification endpoint descriptor
.simcard_interruptIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress =
USBEndpointDescriptor_ADDRESS(USBEndpointDescriptor_IN,
CCID_EPT_NOTIFICATION),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10,
},
/* Communication class interface standard descriptor */
.phone = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 3,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = SIMTRACE_SUBCLASS_CARDEM,
.bInterfaceProtocol = 0,
.iInterface = PHONE_CONF_STR,
},
/* Bulk-OUT endpoint standard descriptor */
.phone_dataOut = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_OUT,
SIMTRACE_USB_EP_PHONE_DATAOUT),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0, /* Must be 0 for full-speed bulk endpoints */
},
/* Bulk-IN endpoint descriptor */
.phone_dataIn = {
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_USB_EP_PHONE_DATAIN),
.bmAttributes = USBEndpointDescriptor_BULK,
.wMaxPacketSize = USBEndpointDescriptor_MAXBULKSIZE_FS,
.bInterval = 0, /* Must be 0 for full-speed bulk endpoints */
},
/* Notification endpoint descriptor */
{
.bLength = sizeof(USBEndpointDescriptor),
.bDescriptorType = USBGenericDescriptor_ENDPOINT,
.bEndpointAddress = USBEndpointDescriptor_ADDRESS(
USBEndpointDescriptor_IN,
SIMTRACE_USB_EP_PHONE_INT),
.bmAttributes = USBEndpointDescriptor_INTERRUPT,
.wMaxPacketSize = USBEndpointDescriptor_MAXINTERRUPTSIZE_FS,
.bInterval = 0x10
},
DFURT_IF_DESCRIPTOR(2, 0),
};
#endif /* HAVE_CARDEM */
/* USB descriptor just to show the version */
typedef struct _SIMTraceDriverConfigurationDescriptorVersion {
/** Standard configuration descriptor. */
USBConfigurationDescriptor configuration;
USBInterfaceDescriptor version;
} __attribute__ ((packed)) SIMTraceDriverConfigurationDescriptorVersion;
static const SIMTraceDriverConfigurationDescriptorVersion
configurationDescriptorVersion = {
/* Standard configuration descriptor for the interface descriptor*/
.configuration = {
.bLength = sizeof(USBConfigurationDescriptor),
.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
.wTotalLength = sizeof(SIMTraceDriverConfigurationDescriptorVersion),
.bNumInterfaces = 1,
.bConfigurationValue = CFG_NUM_VERSION,
.iConfiguration = VERSION_CONF_STR,
.bmAttributes = USBD_BMATTRIBUTES,
.bMaxPower = USBConfigurationDescriptor_POWER(100),
},
/* Interface standard descriptor just holding the version information */
.version = {
.bLength = sizeof(USBInterfaceDescriptor),
.bDescriptorType = USBGenericDescriptor_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 0,
.bInterfaceClass = USB_CLASS_PROPRIETARY,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0,
.iInterface = VERSION_STR,
},
};
const USBConfigurationDescriptor *configurationDescriptorsArr[] = {
#ifdef HAVE_SNIFFER
&configurationDescriptorSniffer.configuration,
#endif
#ifdef HAVE_CCID
&configurationDescriptorCCID.configuration,
#endif
#ifdef HAVE_CARDEM
&configurationDescriptorPhone.configuration,
#endif
#ifdef HAVE_MITM
&configurationDescriptorMITM.configuration,
#endif
&configurationDescriptorVersion.configuration,
};
/** Standard USB device descriptor for the CDC serial driver */
const USBDeviceDescriptor deviceDescriptor = {
.bLength = sizeof(USBDeviceDescriptor),
.bDescriptorType = USBGenericDescriptor_DEVICE,
.bcdUSB = USBDeviceDescriptor_USB2_00,
.bDeviceClass = 0,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = BOARD_USB_VENDOR_ID,
.idProduct = BOARD_USB_PRODUCT_ID,
.bcdDevice = 2, /* Release number */
.iManufacturer = MANUF_STR,
.iProduct = PRODUCT_STRING,
.iSerialNumber = SERIAL_STR,
.bNumConfigurations = ARRAY_SIZE(configurationDescriptorsArr),
};
/* AT91SAM3S only supports full speed, but not high speed USB */
static const USBDDriverDescriptors driverDescriptors = {
&deviceDescriptor,
(const USBConfigurationDescriptor **)&(configurationDescriptorsArr), /* first full-speed configuration descriptor */
0, /* No full-speed device qualifier descriptor */
0, /* No full-speed other speed configuration */
0, /* No high-speed device descriptor */
0, /* No high-speed configuration descriptor */
0, /* No high-speed device qualifier descriptor */
0, /* No high-speed other speed configuration descriptor */
usb_strings_extended,
ARRAY_SIZE(usb_strings_extended),/* cnt string descriptors in list */
};
/*----------------------------------------------------------------------------
* Functions
*----------------------------------------------------------------------------*/
void SIMtrace_USB_Initialize(void)
{
unsigned int i;
/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
#ifdef PIN_USB_PULLUP
const Pin usb_dp_pullup = PIN_USB_PULLUP;
PIO_Configure(&usb_dp_pullup, 1);
PIO_Set(&usb_dp_pullup);
#endif
USBD_HAL_Suspend();
mdelay(20);
#ifdef PIN_USB_PULLUP
PIO_Clear(&usb_dp_pullup);
#endif
USBD_HAL_Activate();
// Get std USB driver
USBDDriver *pUsbd = USBD_GetDriver();
// put device ID into USB serial number description
unsigned int device_id[4];
EEFC_ReadUniqueID(device_id);
char device_id_string[32 + 1];
snprintf(device_id_string, ARRAY_SIZE(device_id_string), "%08x%08x%08x%08x",
device_id[0], device_id[1], device_id[2], device_id[3]);
for (i = 0; i < ARRAY_SIZE(device_id_string) - 1; i++) {
usb_string_serial[2 + 2 * i] = device_id_string[i];
}
// put version into USB string
usb_string_version[0] = USBStringDescriptor_LENGTH(ARRAY_SIZE(git_version) - 1);
usb_string_version[1] = USBGenericDescriptor_STRING;
for (i = 0; i < ARRAY_SIZE(git_version) - 1; i++) {
usb_string_version[2 + i * 2 + 0] = git_version[i];
usb_string_version[2 + i * 2 + 1] = 0;
}
// fill extended USB strings
for (i = 0; i < ARRAY_SIZE(usb_strings) && i < ARRAY_SIZE(usb_strings_extended); i++) {
usb_strings_extended[i] = usb_strings[i];
}
usb_strings_extended[SERIAL_STR] = usb_string_serial;
usb_strings_extended[VERSION_CONF_STR] = usb_string_version_conf;
usb_strings_extended[VERSION_STR] = usb_string_version;
// Initialize standard USB driver
USBDDriver_Initialize(pUsbd, &driverDescriptors, 0); // Multiple interface settings not supported
USBD_Init();
USBD_Connect();
NVIC_EnableIRQ(UDP_IRQn);
}
Reference in New Issue View Git Blame Copy Permalink