mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-18 14:28:33 +03:00
0a6025aeb6
But only when you program the chip. At some point it stops printing the received bytes because the interrupt is not triggered anymore. I do not know yet how and why this happens. Even after restarting the board this state is maintained.
207 lines
6.7 KiB
C
207 lines
6.7 KiB
C
/* ----------------------------------------------------------------------------
|
|
* ATMEL Microcontroller Software Support
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2009, Atmel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Headers
|
|
*------------------------------------------------------------------------------*/
|
|
|
|
#include "board.h"
|
|
|
|
#include <string.h>
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Internal definitions
|
|
*------------------------------------------------------------------------------*/
|
|
|
|
/** Maximum ucSize in bytes of the smartcard answer to a command.*/
|
|
#define MAX_ANSWER_SIZE 10
|
|
|
|
/** Maximum ATR ucSize in bytes.*/
|
|
#define MAX_ATR_SIZE 55
|
|
|
|
/** USB states */
|
|
/// Use for power management
|
|
#define STATE_IDLE 0
|
|
/// The USB device is in suspend state
|
|
#define STATE_SUSPEND 4
|
|
/// The USB device is in resume state
|
|
#define STATE_RESUME 5
|
|
|
|
/* Sniffer configuration */
|
|
|
|
#ifdef PIN_SC_SW
|
|
#undef PIN_SC_SW
|
|
#endif
|
|
#define PIN_SC_SW {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#ifdef PIN_IO_SW
|
|
#undef PIN_IO_SW
|
|
#endif
|
|
#define PIN_IO_SW {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#define PINS_BUS PIN_SC_SW, PIN_IO_SW
|
|
|
|
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Internal variables
|
|
*------------------------------------------------------------------------------*/
|
|
/** USB state: suspend, resume, idle */
|
|
unsigned char USBState = STATE_IDLE;
|
|
|
|
/** ISO7816 pins */
|
|
static const Pin pinsISO7816_sniff[] = {PINS_SIM_SNIFF_SIM};
|
|
static const Pin pins_bus[] = {PINS_BUS};
|
|
static const Pin pPwr[] = {
|
|
/* Enable power converter 4.5-6V to 3.3V; low: off */
|
|
{SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT},
|
|
|
|
/* Enable second power converter: VCC_PHONE to VCC_SIM; high: off */
|
|
{VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
};
|
|
|
|
uint32_t char_stat = 0;
|
|
uint8_t rcvdChar = 0;
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Interrupt routines
|
|
*-----------------------------------------------------------------------------*/
|
|
/*
|
|
* char_stat is zero if no error occured.
|
|
* Otherwise it is filled with the content of the status register.
|
|
*/
|
|
void USART1_IrqHandler( void )
|
|
{
|
|
uint32_t stat;
|
|
char_stat = 0;
|
|
// Rcv buf full
|
|
/* if((stat & US_CSR_RXBUFF) == US_CSR_RXBUFF) {
|
|
TRACE_DEBUG("Rcv buf full");
|
|
USART_DisableIt(USART1, US_IDR_RXBUFF);
|
|
}
|
|
*/
|
|
uint32_t csr = USART_PHONE->US_CSR;
|
|
|
|
if (csr & US_CSR_TXRDY) {
|
|
/* transmit buffer empty, nothing to transmit */
|
|
}
|
|
if (csr & US_CSR_RXRDY) {
|
|
stat = (csr&(US_CSR_OVRE|US_CSR_FRAME|
|
|
US_CSR_PARE|US_CSR_TIMEOUT|US_CSR_NACK|
|
|
(1<<10)));
|
|
|
|
if (stat == 0 ) {
|
|
/* Get a char */
|
|
rcvdChar = ((USART_PHONE->US_RHR) & 0xFF);
|
|
} /* else: error occured */
|
|
char_stat = stat;
|
|
}
|
|
}
|
|
|
|
/** Initializes a ISO driver
|
|
* \param pPinIso7816RstMC Pin ISO 7816 Rst MC
|
|
*/
|
|
void _ISO7816_Init( )
|
|
{
|
|
TRACE_DEBUG("ISO_Init\n\r");
|
|
|
|
USART_Configure( USART_PHONE,
|
|
US_MR_USART_MODE_IS07816_T_0
|
|
// Nope, we aren't master:
|
|
// | US_MR_USCLKS_MCK
|
|
| US_MR_USCLKS_SCK
|
|
| US_MR_NBSTOP_1_BIT
|
|
| US_MR_PAR_EVEN
|
|
| US_MR_CHRL_8_BIT
|
|
| US_MR_CLKO /** TODO: This field was set in the original simtrace firmware..why? */
|
|
| (3<<24), /* MAX_ITERATION */
|
|
1,
|
|
0);
|
|
/*
|
|
SYNC = 0 (async mode)
|
|
OVER = 0 (oversampling by 8?)
|
|
FIDI = 372 (default val on startup before other value is negotiated)
|
|
USCLKS = 3 (Select SCK as input clock) --> US_MR_USCLKS_SCK
|
|
CD = 1 ? --> US_BRGR_CD(1)
|
|
*/
|
|
USART_PHONE->US_FIDI = 372;
|
|
USART_PHONE->US_BRGR = US_BRGR_CD(1);
|
|
// USART_PHONE->US_BRGR = BOARD_MCK / (372*9600);
|
|
USART_PHONE->US_TTGR = 5;
|
|
|
|
/* Configure USART */
|
|
PMC_EnablePeripheral(ID_USART_PHONE);
|
|
|
|
USART1->US_IDR = 0xffffffff;
|
|
USART_EnableIt( USART1, US_IER_RXRDY) ;
|
|
/* enable USART1 interrupt */
|
|
NVIC_EnableIRQ( USART1_IRQn ) ;
|
|
|
|
// USART_PHONE->US_IER = US_IER_RXRDY | US_IER_OVRE | US_IER_FRAME | US_IER_PARE | US_IER_NACK | US_IER_ITER;
|
|
|
|
USART_SetReceiverEnabled(USART_PHONE, 1);
|
|
|
|
}
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* Main
|
|
*------------------------------------------------------------------------------*/
|
|
|
|
extern int main( void )
|
|
{
|
|
uint8_t ucSize ;
|
|
static uint8_t buff[100];
|
|
|
|
LED_Configure(LED_NUM_GREEN);
|
|
LED_Set(LED_NUM_GREEN);
|
|
|
|
/* Disable watchdog*/
|
|
WDT_Disable( WDT ) ;
|
|
|
|
PIO_InitializeInterrupts(0);
|
|
|
|
/* Configure ISO7816 driver */
|
|
PIO_Configure( pinsISO7816_sniff, PIO_LISTSIZE( pinsISO7816_sniff ) ) ;
|
|
PIO_Configure( pins_bus, PIO_LISTSIZE( pins_bus) ) ;
|
|
PIO_Configure(pPwr, PIO_LISTSIZE( pPwr ));
|
|
|
|
_ISO7816_Init( );
|
|
|
|
printf("***** START \n\r");
|
|
while (1) {
|
|
// printf(".\n\r");
|
|
|
|
if (rcvdChar != 0) {
|
|
printf("Received _%x_ \n\r", rcvdChar);
|
|
rcvdChar = 0;
|
|
}
|
|
}
|
|
return 0 ;
|
|
}
|