Files
simtrace2/firmware/include_board/iso7816_4.h
Christina Quast e24b9ace89 ISO7816_Init: Initialized with USART
* ISO7816_Init: Takes Usart_info and CLK_SLAVE/CLK_MASTER as param
* ISO7816_SendChar, ISO7816_GetChar: Usart_info is passed
* ISO7816_Set_Reset_Pin function for CCID part
* iso7816_4.c: BOARD_ISO7816_BASE_USART replaced by USART_SIM
* Redundant _ISO7816_Init, _ISO7816_SendChar, _ISO7816_GetChar
    functions removed
* All simtrace modes use iso7816_4.c functions instead of redefined
    _ISO7816_xxx functions
2015-04-10 17:44:49 +02:00

95 lines
3.8 KiB
C

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#include <stdbool.h>
#include "board.h"
//------------------------------------------------------------------------------
/** \file
*
* \section Purpose
*
* Definition of methods for ISO7816 driver.
*
* \section Usage
*
* -# ISO7816_Init
* -# ISO7816_IccPowerOff
* -# ISO7816_XfrBlockTPDU_T0
* -# ISO7816_Escape
* -# ISO7816_RestartClock
* -# ISO7816_StopClock
* -# ISO7816_toAPDU
* -# ISO7816_Datablock_ATR
* -# ISO7816_SetDataRateandClockFrequency
* -# ISO7816_StatusReset
* -# ISO7816_cold_reset
* -# ISO7816_warm_reset
* -# ISO7816_Decode_ATR
*----------------------------------------------------------------------------*/
#ifndef ISO7816_4_H
#define ISO7816_4_H
/*------------------------------------------------------------------------------
* Constants Definition
*----------------------------------------------------------------------------*/
/** Size max of Answer To Reset */
#define ATR_SIZE_MAX 55
/** NULL byte to restart byte procedure */
#define ISO_NULL_VAL 0x60
/*------------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
extern void ISO7816_Init( Usart_info *base_usart, bool master_clock );
extern void ISO7816_Set_Reset_Pin(const Pin *pPinIso7816RstMC);
extern uint32_t ISO7816_SendChar( uint8_t CharToSend, Usart_info *usart );
extern uint32_t ISO7816_GetChar( uint8_t *pCharToReceive, Usart_info *usart);
extern void ISO7816_IccPowerOff(void);
extern uint32_t ISO7816_XfrBlockTPDU_T0(const uint8_t *pAPDU,
uint8_t *pMessage,
uint16_t wLength,
uint16_t *retlen);
extern void ISO7816_Escape( void );
extern void ISO7816_RestartClock(void);
extern void ISO7816_StopClock( void );
extern void ISO7816_toAPDU( void );
extern uint32_t ISO7816_Datablock_ATR( uint8_t* pAtr, uint8_t* pLength );
extern void ISO7816_SetDataRateandClockFrequency( uint32_t dwClockFrequency, uint32_t dwDataRate );
extern uint8_t ISO7816_StatusReset( void );
extern void ISO7816_cold_reset( void );
extern void ISO7816_warm_reset( void );
extern void ISO7816_Decode_ATR( uint8_t* pAtr );
#endif /* ISO7816_4_H */