mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-17 13:48:32 +03:00
389a4040d5
in case flashing the main application firmware using DFU failed, the main application might be broken and not allow to switch again to DFU mode to re-flash it correctly. the other board have a way to force entering (e.g. staying in) the bootloader using an external signal (e.g. a switch on the SIMtrace board). the OWHW DFU firmware did not have this functionality implemented. the design (e.g. schematic) already has the SIMTRACE_BOOTLOADER signal (on PA31) for this purpose. now the DFU bootloader will start the DFU mode when the SIMTRACE_BOOTLOADER is high. this change has been tested on OWHWv2. Change-Id: Iefff51a811ad0f3bf3a46b8e256b905d11344bea
97 lines
4.0 KiB
C
97 lines
4.0 KiB
C
/* OWHW board definition
|
|
*
|
|
* (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
|
|
* (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
#pragma once
|
|
#include "board_common.h"
|
|
#include "simtrace_usb.h"
|
|
|
|
/** Name of the board */
|
|
#define BOARD_NAME "OWHW"
|
|
/** Board definition */
|
|
#define owhw
|
|
|
|
/** oscillator used as main clock source (in Hz) */
|
|
#define BOARD_MAINOSC 18432000
|
|
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
|
|
#define BOARD_MCK 58982400 // 18.432 * 16 / 5
|
|
|
|
/** MCU pin connected to red LED */
|
|
#define PIO_LED_RED PIO_PA17
|
|
/** MCU pin connected to green LED */
|
|
#define PIO_LED_GREEN PIO_PA18
|
|
/** red LED pin definition */
|
|
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** green LED pin definition */
|
|
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** LEDs pin definition */
|
|
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
|
/** index for red LED in LEDs pin definition array */
|
|
#define LED_NUM_RED 0
|
|
/** index for green LED in LEDs pin definition array */
|
|
#define LED_NUM_GREEN 1
|
|
|
|
/* pin connected to the SIMTRACE_BOOTLOADER signal. set high to force DFU bootloader start */
|
|
#define PIN_BOOTLOADER {PIO_PA31, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
/* USIM 2 interface (USART) */
|
|
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
|
|
|
/* USIM 2 interface (TC) */
|
|
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
|
|
|
/* USIM 1 interface (USART) */
|
|
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
|
|
|
/* USIM 1 interface (TC) */
|
|
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
|
|
|
#define PIN_SET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PIN_SET_USIM2_PRES {PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
|
|
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
|
|
|
|
#define PINS_CARDSIM { PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
|
|
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
|
|
|
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
|
|
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_OWHW_SAM3
|
|
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OWHW_SAM3_DFU
|
|
#define BOARD_USB_RELEASE 0x010
|
|
|
|
#define CARDEMU_SECOND_UART
|
|
/* Disable VCC/ADC detection, as OWHWv2 has no ADCVREF */
|
|
//#define DETECT_VCC_BY_ADC
|
|
|
|
#define HAVE_CARDEM
|