mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
5eaf5f8e3a
the reset/ATR handling has been heavily updated/fixed. instead of using the timer counter peripheral to handle the waiting time and corresponding timeout, the USART peripheral internal timeout mechanism is used. this is particularly important for the SIMtrace board since the clock signal is not connected to the timer counter. thus this change adds card emulation support for SIMtrace boards. Fi and Di have been properly rename to F and D since the "i" stands only for an "indicated" value, not the actual value. this does not change the USB protocol (the variable have just been renamed). additional variables store more information about the card capabilities NOTE: it has only be tested for the SIMtrace board Change-Id: Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5
118 lines
4.9 KiB
C
118 lines
4.9 KiB
C
/* sysmocom quad-modem sysmoQMOD board definition
|
|
*
|
|
* (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
#pragma once
|
|
#include "board_common.h"
|
|
#include "simtrace_usb.h"
|
|
|
|
/** Name of the board */
|
|
#define BOARD_NAME "QMOD"
|
|
/** Board definition */
|
|
#define qmod
|
|
|
|
/** oscillator used as main clock source (in Hz) */
|
|
#define BOARD_MAINOSC 12000000
|
|
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
|
|
#define BOARD_MCK 58000000 // 18.432 * 29 / 6
|
|
|
|
/** MCU pin connected to red LED */
|
|
#define PIO_LED_RED PIO_PA17
|
|
/** MCU pin connected to green LED */
|
|
#define PIO_LED_GREEN PIO_PA18
|
|
/** red LED pin definition */
|
|
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** green LED pin definition */
|
|
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** LEDs pin definition */
|
|
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
|
/** index for red LED in LEDs pin definition array */
|
|
#define LED_NUM_RED 0
|
|
/** index for green LED in LEDs pin definition array */
|
|
#define LED_NUM_GREEN 1
|
|
/** the green LED is actually red and used as indication for USIM1 */
|
|
#define LED_USIM1 LED_GREEN
|
|
/** the green LED is actually red and used as indication for USIM2 */
|
|
#define LED_USIM2 LED_RED
|
|
|
|
/* USIM 2 interface (USART) */
|
|
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
|
|
|
/* USIM 2 interface (TC) */
|
|
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
|
|
|
/* USIM 1 interface (USART) */
|
|
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
|
|
|
/* USIM 1 interface (TC) */
|
|
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
|
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST
|
|
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST
|
|
|
|
/* from v3 and onwards only (!) */
|
|
#define PIN_DET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
|
#define PIN_DET_USIM2_PRES {PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
|
|
|
/* only in v2 and lower (!) */
|
|
#define PIN_PRTPWR_OVERRIDE {PIO_PA8, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
|
|
/* inputs reading the WWAN LED level */
|
|
#define PIN_WWAN1 {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
|
#define PIN_WWAN2 {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
|
|
#define PINS_WWAN_IN { PIN_WWAN1, PIN_WWAN2 }
|
|
|
|
/* outputs controlling RESET input of modems */
|
|
#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
|
|
#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
|
|
#define PINS_PERST { PIN_PERST1, PIN_PERST2 }
|
|
|
|
#define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
|
|
|
|
/* GPIO towards SPDT switches between real SIM and SAM3 */
|
|
#define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
|
|
|
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
|
|
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_QMOD_SAM3
|
|
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_QMOD_SAM3_DFU
|
|
#define BOARD_USB_RELEASE 0x010
|
|
|
|
#define CARDEMU_SECOND_UART
|
|
#define DETECT_VCC_BY_ADC
|
|
|
|
/** sysmoQMOD only supports card emulation */
|
|
#ifdef APPLICATION_cardem
|
|
#define HAVE_CARDEM
|
|
#endif
|