Christina Quast 6255ccca84 USB driver send standard configuration ...

One configuration, one Interface, two endpoints (bulk in and out)

We don't need to configure Endpoint 0 which is always the control
endpoint and configured before any descriptor requests take place.

% python usb_enum.py
Found device
  CONFIGURATION 2: 100 mA ==================================
   bLength              :    0x9 (9 bytes)
   bDescriptorType      :    0x2 Configuration
   wTotalLength         :   0x20 (32 bytes)
   bNumInterfaces       :    0x1
   bConfigurationValue  :    0x2
   iConfiguration       :    0x2 SOME
   bmAttributes         :   0x80 Bus Powered
   bMaxPower            :   0x32 (100 mA)
    INTERFACE 0: Vendor Specific ===========================
     bLength            :    0x9 (9 bytes)
     bDescriptorType    :    0x4 Interface
     bInterfaceNumber   :    0x0
     bAlternateSetting  :    0x0
     bNumEndpoints      :    0x2
     bInterfaceClass    :   0xff Vendor Specific
     bInterfaceSubClass :    0x0
     bInterfaceProtocol :    0x0
     iInterface         :    0x1 SIMTRACE~~~~~
      ENDPOINT 0x1: Bulk OUT ===============================
       bLength          :    0x7 (7 bytes)
       bDescriptorType  :    0x5 Endpoint
       bEndpointAddress :    0x1 OUT
       bmAttributes     :    0x2 Bulk
       wMaxPacketSize   :   0x40 (64 bytes)
       bInterval        :    0x0
      ENDPOINT 0x82: Bulk IN ===============================
       bLength          :    0x7 (7 bytes)
       bDescriptorType  :    0x5 Endpoint
       bEndpointAddress :   0x82 IN
       bmAttributes     :    0x2 Bulk
       wMaxPacketSize   :   0x40 (64 bytes)
       bInterval        :    0x0

2015-02-10 20:45:08 +01:00

..

at91lib_based_ccid_example.c

Debugging of smartcard insertion interrupt

2015-01-09 16:14:19 +01:00

blink2.c

test for phone I/O pin

2015-01-21 14:00:45 +01:00

blink_thilo.c

some main file possibilities

2014-12-02 13:09:49 +01:00

blink.c

Makefile with libs and atmel source

2014-12-02 13:06:01 +01:00

debug_uart_stdlib.c

Using existing atmel led routines

2014-12-16 10:59:13 +01:00

iso7816.c

iso7816: smartcard inserted detection partly works

2014-12-19 19:36:55 +01:00

phone_test.c

Receiver interrupt enabled

2015-01-29 18:05:32 +01:00

sniffer.c

Removed unused defines for USB operation in sniffer.c

2015-01-30 19:22:23 +01:00

spi.c

some main file possibilities

2014-12-02 13:09:49 +01:00

usart.c

Small aestethic change in usart.c

2015-01-15 14:39:47 +01:00

usb_enum.c

USB driver send standard configuration

2015-02-10 20:45:08 +01:00