mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
9d3e38242c
I couldn't help but to spend my sunday on working towards card emulation, including * various state machines in the target about ISO7816 states * tc_etu timer import from simtrace1 * req_ctx import from simtrace1 (needs renaming and simplifiation) * USB protocol description as cardemu_prot.h * some host-based testing code to test the state machines The code seems to work fine throughout card reset, sending ATR and receiving the TPDU header of the first APDU, up to the point where it marks the TPDU header as to-be-transmitted over th bulk-in endpoint. Sending the ATR must be done inside the firmware for timing requirements. From that point onwards, the host needs to respond at the very least with a procedure byte, and some indication whether or not the card emulator should continue to transmit data (card->reader), or receive data (reader->card). The code is intentionally not hooked up yet with the USB logic nor with the UART. I want host-based testing completed before doing that.
195 lines
7.4 KiB
Makefile
195 lines
7.4 KiB
Makefile
# ----------------------------------------------------------------------------
|
|
# ATMEL Microcontroller Software Support
|
|
# ----------------------------------------------------------------------------
|
|
# Copyright (c) 2010, Atmel Corporation
|
|
#
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are met:
|
|
#
|
|
# - Redistributions of source code must retain the above copyright notice,
|
|
# this list of conditions and the disclaimer below.
|
|
#
|
|
# Atmel's name may not be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
# ----------------------------------------------------------------------------
|
|
|
|
# Makefile for compiling the Getting Started with SAM3S Microcontrollers project
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# User-modifiable options
|
|
#-------------------------------------------------------------------------------
|
|
|
|
# Chip & board used for compilation
|
|
# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
|
|
CHIP = sam3s2
|
|
BOARD = simtrace
|
|
|
|
# Defines which are the available memory targets for the SAM3S-EK board.
|
|
MEMORIES = flash
|
|
|
|
# Trace level used for compilation
|
|
# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
|
|
# TRACE_LEVEL_DEBUG 5
|
|
# TRACE_LEVEL_INFO 4
|
|
# TRACE_LEVEL_WARNING 3
|
|
# TRACE_LEVEL_ERROR 2
|
|
# TRACE_LEVEL_FATAL 1
|
|
# TRACE_LEVEL_NO_TRACE 0
|
|
TRACE_LEVEL = 1
|
|
#FIXME: Remove this variable
|
|
NOAUTOCALLBACK=no
|
|
|
|
DEBUG_PHONE_SNIFF=0
|
|
|
|
#CFLAGS+=-DUSB_NO_DEBUG=1
|
|
|
|
# Optimization level, put in comment for debugging
|
|
OPTIMIZATION = -O0
|
|
|
|
# Output file basename
|
|
OUTPUT = project
|
|
|
|
# Output directories
|
|
BIN = bin
|
|
OBJ = obj
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Tools
|
|
#-------------------------------------------------------------------------------
|
|
|
|
AT91LIB_USB_COMMON_CORE_PATH = atmel_softpack_libraries/usb/common/core
|
|
AT91LIB_USB_CORE_PATH = atmel_softpack_libraries/usb/device/core
|
|
|
|
# Tool suffix when cross-compiling
|
|
CROSS_COMPILE = arm-none-eabi-
|
|
|
|
LIBS = -Wl,--start-group -lgcc -lc -Wl,--end-group
|
|
|
|
# Compilation tools
|
|
CC = $(CROSS_COMPILE)gcc
|
|
LD = $(CROSS_COMPILE)ld
|
|
SIZE = $(CROSS_COMPILE)size
|
|
STRIP = $(CROSS_COMPILE)strip
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
GDB = $(CROSS_COMPILE)gdb
|
|
NM = $(CROSS_COMPILE)nm
|
|
|
|
# Flags
|
|
INCLUDES_USB = -Iatmel_softpack_libraries/usb/include
|
|
|
|
INCLUDES = -Iinclude_board -Iinclude_sam3s -Iinclude -Isrc_simtrace
|
|
INCLUDES += -Icmsis
|
|
INCLUDES += $(INCLUDES_USB)
|
|
|
|
CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wimplicit-int #-Wformat=2
|
|
CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
|
|
CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs #-Wunused
|
|
CFLAGS += -Wuninitialized -Wunknown-pragmas -Wfloat-equal -Wundef
|
|
CFLAGS += -Wshadow -Wpointer-arith -Wbad-function-cast -Wwrite-strings
|
|
CFLAGS += -Wsign-compare -Waggregate-return
|
|
CFLAGS += -Wformat=0
|
|
CFLAGS += -Wmissing-format-attribute -Wno-deprecated-declarations
|
|
CFLAGS += #-Wpacked
|
|
CFLAGS += -Wredundant-decls -Wnested-externs -Winline #-Wlong-long
|
|
CFLAGS += -Wunreachable-code
|
|
CFLAGS += -Wcast-align
|
|
CFLAGS += -std=c11
|
|
CFLAGS += -Wmissing-noreturn
|
|
#CFLAGS += -Wconversion
|
|
CFLAGS += -Wno-unused-but-set-variable -Wno-unused-variable
|
|
CFLAGS += -Wno-suggest-attribute=noreturn
|
|
|
|
# To reduce application size use only integer printf function.
|
|
CFLAGS += -Dprintf=iprintf
|
|
|
|
# -mlong-calls -Wall
|
|
#CFLAGS += -save-temps -fverbose-asm
|
|
#CFLAGS += -Wa,-a,-ad
|
|
CFLAGS += -D__ARM
|
|
CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
|
|
CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) -DDEBUG_PHONE_SNIFF=$(DEBUG_PHONE_SNIFF)
|
|
ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
|
|
LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols $(LIB)
|
|
#LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Files
|
|
#-------------------------------------------------------------------------------
|
|
|
|
# Directories where source files can be found
|
|
|
|
USB_PATHS = $(AT91LIB_USB_CORE_PATH) $(AT91LIB_USB_COMMON_CORE_PATH)
|
|
VPATH += src_board src_sam3s cmsis $(USB_PATHS) src_simtrace
|
|
|
|
# Objects built from C source files
|
|
C_CMSIS = core_cm3.o
|
|
C_LOWLEVEL = board_cstartup_gnu.o board_lowlevel.o syscalls.o exceptions.o
|
|
C_LIBLEVEL = spi.o pio.o pmc.o usart.o pio_it.o pio_capture.o uart_console.o iso7816_4.o wdt.o led.o tc.o
|
|
C_CCID = cciddriver.o USBD.o USBDDriver.o USBD_HAL.o USBRequests.o USBDCallbacks.o USBDescriptors.o USBDDriverCallbacks.o
|
|
C_SIMTRACE = simtrace_iso7816.o usb.o ccid.o sniffer.o phone.o mitm.o ringbuffer.o host_communication.o iso7816_fidi.o tc_etu.o req_ctx.o #iso7816_uart.o
|
|
C_APPLEVEL = main.o
|
|
C_OBJECTS = $(C_CMSIS) $(C_LOWLEVEL) $(C_LIBLEVEL) $(C_APPLEVEL) $(C_CCID) $(C_SIMTRACE)
|
|
|
|
# Append OBJ and BIN directories to output filename
|
|
OUTPUT := $(BIN)/$(OUTPUT)
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Rules
|
|
#-------------------------------------------------------------------------------
|
|
|
|
all: $(BIN) $(OBJ) $(MEMORIES)
|
|
|
|
$(BIN) $(OBJ):
|
|
mkdir $@
|
|
|
|
define RULES
|
|
C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
|
|
ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
|
|
|
|
$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
|
|
@$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
|
|
@$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
|
|
@$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
|
|
@$(SIZE) $$^ $(OUTPUT)-$$@.elf
|
|
|
|
$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
|
|
@echo [COMPILING $$<]
|
|
@$(CC) $(CFLAGS) -D$(1) -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<
|
|
|
|
$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
|
|
@echo [ASSEMBLING $$@]
|
|
@$(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
|
|
|
|
debug_$(1): $(1)
|
|
$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
|
|
endef
|
|
|
|
$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
|
|
|
|
program:
|
|
openocd -f openocd/openocd.cfg -c "init" -c "halt" -c "flash write_bank 0 ./bin/project-flash.bin 0" -c "reset" -c "shutdown"
|
|
|
|
SERIAL ?= /dev/ttyUSB0
|
|
log:
|
|
stty -F $(SERIAL) 115200
|
|
lsof $(SERIAL) && echo "log is already opened" || ( sed -u "s/\r//" $(SERIAL) | ts )
|
|
|
|
clean:
|
|
-rm -fR $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf $(BIN)/*.elf.txt $(BIN)/*.map $(BIN)/*.lst
|
|
|
|
rmbak:
|
|
-rm *~ $(BIN)/*~
|