mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
a02b641650
You can compile the firmware for this new target using 'make BOARD=qmod'. The QMOD differs from simtrace+owhw in terms of low-level initialization, as it has an external 12MHz clock at XIN, thus bypasses the main oscillator and needs different PLL configuration.
54 lines
2.1 KiB
C
54 lines
2.1 KiB
C
#pragma once
|
|
#include "board_common.h"
|
|
|
|
/** Name of the board */
|
|
#define BOARD_NAME "OWHW"
|
|
/** Board definition */
|
|
#define owhw
|
|
|
|
#define BOARD_MAINOSC 18432000
|
|
|
|
/* USIM 2 interface (USART) */
|
|
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
|
|
|
|
/* USIM 2 interface (TC) */
|
|
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
|
|
|
|
/* USIM 1 interface (USART) */
|
|
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
|
|
|
|
/* USIM 1 interface (TC) */
|
|
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
|
|
|
|
#define PIN_SET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PIN_SET_USIM2_PRES {PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
|
|
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
|
|
|
|
#define PINS_CARDSIM { PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
|
|
|
|
#define SIMTRACE_VENDOR_ID 0x1d50
|
|
#define SIMTRACE_PRODUCT_ID 0x60e3 /* FIXME */
|
|
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
|
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
|
|
|
#define CARDEMU_SECOND_UART
|
|
/* Disable VCC/ADC detection, as OWHWv2 has no ADCVREF */
|
|
//#define DETECT_VCC_BY_ADC
|
|
|
|
#define HAVE_CARDEM
|