mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-17 05:38:33 +03:00
3f5e3ddffc
This way we can easily check with 'diff' for differences in our code and Atmel softpack. Also, this layout is more suitable for building various different firmware images (e.g. factory-test, dfu-loader, main application) for a variety of different boards (simtrace, owhw, qmod).
86 lines
4.4 KiB
C
86 lines
4.4 KiB
C
#pragma once
|
|
#include "board_common.h"
|
|
|
|
/** Name of the board */
|
|
#define BOARD_NAME "SAM3S-SIMTRACE"
|
|
/** Board definition */
|
|
#define simtrace
|
|
|
|
#define BOARD_MAINOSC 18432000
|
|
|
|
/** Phone (SIM card emulator)/CCID Reader/MITM configuration **/
|
|
/* Normally the communication lines between phone and SIM card are disconnected */
|
|
// Disconnect SIM card I/O, VPP line from the phone lines
|
|
// FIXME: Per default pins are input, therefore high-impedance, therefore they don not activate the bus switch, right?
|
|
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
// Disconnect SIM card RST, CLK line from the phone lines
|
|
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
#define PINS_BUS_DEFAULT PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
|
|
|
|
/** Sniffer configuration **/
|
|
// Connect VPP, CLK and RST lines from smartcard to the phone
|
|
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
|
|
|
|
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
|
|
|
|
#define SIM_PWEN_PIN {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
|
|
#define PWR_PINS \
|
|
/* Enable power converter 4.5-6V to 3.3V; low: off */ \
|
|
{SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}, \
|
|
/* Enable second power converter: VCC_PHONE to VCC_SIM; high: on */ \
|
|
{VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
|
|
#define SW_SIM PIO_PA8
|
|
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
|
|
//#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE}
|
|
|
|
/// PIN used for resetting the smartcard
|
|
// FIXME: Card is resetted with pin set to 0 --> PIO_OUTPUT_1 as default is right?
|
|
#define PIN_ISO7816_RSTMC {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
/// Pins used for connect the smartcard
|
|
#define PIN_SIM_IO_INPUT {PIO_PA1, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_SIM_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_SIM_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
#define PIN_SIM_CLK_INPUT {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
//#define PINS_ISO7816 PIN_USART1_TXD, PIN_USART1_SCK, PIN_ISO7816_RSTMC
|
|
#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
|
|
|
|
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
|
|
|
|
#define VCC_PHONE {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_ISO7816_RST_PHONE {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE | PIO_DEGLITCH }
|
|
#define PIN_PHONE_IO_INPUT {PIO_PA21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PIN_PHONE_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
#define PIN_PHONE_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} // External Clock Input on PA28
|
|
//#define PIN_PHONE_CLK {PIO_PA23A_SCK1, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} // External Clock Input on PA28
|
|
#define PIN_PHONE_CLK_INPUT {PIO_PA29, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
|
#define PINS_ISO7816_PHONE PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, VCC_PHONE, PIN_PHONE_IO_INPUT, PIN_ISO7816_RST_PHONE
|
|
//, VCC_PHONE
|
|
|
|
|
|
//** SPI interface **/
|
|
/// SPI MISO pin definition (PA12).
|
|
#define PIN_SPI_MISO {1 << 12, PIOA, PIOA, PIO_PERIPH_A, PIO_PULLUP}
|
|
/// SPI MOSI pin definition (PA13).
|
|
#define PIN_SPI_MOSI {1 << 13, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// SPI SPCK pin definition (PA14).
|
|
#define PIN_SPI_SPCK {1 << 14, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// SPI pins definition. Contains MISO, MOSI & SPCK (PA12, PA13 & PA14).
|
|
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
|
|
/// SPI chip select 0 pin definition (PA11).
|
|
#define PIN_SPI_NPCS0 {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
#define SIMTRACE_VENDOR_ID 0x1d50
|
|
#define SIMTRACE_PRODUCT_ID 0x60e3
|
|
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
|
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
|
|
|
#define HAVE_SNIFFER
|
|
#define HAVE_CCID
|
|
#define HAVE_CARDEM
|
|
#define HAVE_MITM
|