Kévin Redon ed3ceec56f DFU: increase USB reset duration to 50 ms ...

the specification requires a reset duration of at least 10 ms.
reset is indicated by the device to the host by removing the
pull-up on D+ (host to device reset is a USB packet).
we used 20 ms, but on some setups (USB host, stack, hub, and load
dependent), this does not seem to be enough (no USB enumeration
was performed afterward, at least for the DFU bootloader).
increasing to 50 ms solved the issue on the affected setups.

instead of USB suspend, the more proper USB disconnect is used.
this mainly disables the pull-up provided by the USB peripheral.
USB activate is not required since the follow up initialisation
takes care of it.

Change-Id: If5ceb3b8f7a8f134d4439fdd138dd12b46589f97

2019-12-03 15:51:52 +00:00

..

cardem

minor: updated copyright years

2019-12-02 19:26:11 +01:00

ccid

Structure build system to build for multiple boards/apps/environments

2017-02-27 22:18:45 +01:00

dfu

DFU: increase USB reset duration to 50 ms

2019-12-03 15:51:52 +00:00

freq_ctr

Add freq_ctr app

2019-02-28 20:05:59 +01:00

gpio_test

add/fix mcp23017 i2c gpio expander functions and tests

2019-10-24 18:09:05 +02:00

trace

firmware: Enable -Wformat and resolve all related compiler warnings

2018-08-26 10:20:05 +02:00

triple_play

replace leading spaces with tabs

2018-07-11 22:01:58 +02:00