Some things are ready

-Fixed Scroll reducer.
-Some functions were broken down into simpler functions, to facilitate the reading of the code.
-The spanish comments were changed to english
-Some variables like cursera or curseraf now they have names that give meaning to what they are.

Extras/tester/tester.ino

@@ -5,23 +5,23 @@
  * Test your logic analyzer with another arduino
  */
 
-#define led A5
-#define led2 13
+#define pin1 A5
+#define pin2 13
 
 void setup() {
-  pinMode(led, OUTPUT);
-  pinMode(led2, OUTPUT);
+  pinMode(pin1, OUTPUT);
+  pinMode(pin2, OUTPUT);
 }
 
 
 void loop() {
   
-  digitalWrite(led, HIGH);
+  digitalWrite(pin1, HIGH);
   delayMicroseconds(random(200));
-  digitalWrite(led2, HIGH);
+  digitalWrite(pin2, HIGH);
   delayMicroseconds(random(200));
-  digitalWrite(led2, LOW);
+  digitalWrite(pin2, LOW);
   delayMicroseconds(random(200));
-  digitalWrite(led, LOW);
+  digitalWrite(pin1, LOW);
   delayMicroseconds(random(200));
 }

Microcontroller_Code/ESP8266/ESP8266.ino

@@ -2,7 +2,6 @@
  * ESP8266.ino
  *
  * Author : yoursunny
- * Led: LED_BUILTIN
  */ 
 
 #include <c_types.h>
@@ -31,7 +30,7 @@ void setup() {
   Serial.begin(baudrate);
 
   pinMode(LED_BUILTIN, OUTPUT);
-  digitalWrite(LED_BUILTIN, HIGH);
+  digitalWrite(LED_BUILTIN, LOW);
 
   pinMode(PIN0, INPUT_PULLUP);
   pinMode(PIN1, INPUT_PULLUP);

Microcontroller_Code/MEGA/MEGA.ino

@@ -1,6 +1,6 @@
 /*
  * Created: 11/12/2016 19.35.51
- * Author : Vincenzo
+ * Author : sancho / Vincenzo
  */ 
 
 #define baudrate 115200 //check if it is the same in processing
@@ -24,21 +24,22 @@ uint16_t event = 0;
 uint8_t cambio=0;
 void init_board() {
   
-//  PORTC = (0 << 0); DDRC |= (1 << 0); // led A0
   DDRB = 0x00;     
   DDRC = 0x00;     
   DDRL = 0x00;
-  if (PULLUP){
-  PORTA = B11111111;    // pull-up
-  PORTC = B11111111;    // Activamos el pull-up para que de no conectarse nada a puerto lea un uno siempre
-  PORTL = B11111111;
+  if (PULLUP){	// Activamos el pull-up para que de no conectarse nada a puerto lea un uno siempre
+	  for (uint8_t p = 22; p <= 49; p++){
+		  pinMode(p, INPUT_PULLUP);
+	  }
   }
   else{
-  PORTA = B00000000;    
-  PORTC = B00000000;    
-  PORTL = B00000000;
+	  for (uint8_t p = 22; p <= 49; p++){
+		  pinMode(p, INPUT);
 	  }
   }
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, LOW);
+}
 
 void init_timer() {
 
@@ -86,7 +87,7 @@ void start() {
   reset_timer1();
   event = 0;
 
-  //PORTC = (1 << 0);
+  digitalWrite(LED_BUILTIN, HIGH);
   initial1 = PINA;
   initial2 = PINL;
   initial3 = PINC;
@@ -100,12 +101,11 @@ void start() {
     //Serial.print(pinChanged1[i]); Serial.print(','); Serial.print(pinChanged2[i]); Serial.print(','); Serial.println(pinChanged3[i]);
     
     }
-
 }
 
 
 void sendData() {
-  //PORTC = (0 << 0);   //turn off led
+  digitalWrite(LED_BUILTIN, LOW);
   //initial data
   Serial.println("S");
   Serial.print(initial1); Serial.print(','); Serial.print(initial2); Serial.print(','); Serial.print(initial3); Serial.print(":");

Microcontroller_Code/STM32F1/STM32F1.ino

@@ -3,15 +3,11 @@
  *
  * Author : Vincenzo
  * this works using the unofficial STM32 core, more info: https://github.com/rogerclarkmelbourne/Arduino_STM32
- * Led: PB1
  */ 
 
 
 #define baudrate 115200 // check if it is the same in processing
 #define samples 200		// the number of samples you want to take
-#define boardLed PA1
-
-
 
 uint16_t initial, state, old_state;
 uint16_t pinChanged[samples];
@@ -26,8 +22,8 @@ void setup() {
 
   Serial.begin(baudrate);
 
-  pinMode (boardLed, OUTPUT);
-  digitalWrite(boardLed, LOW);
+  pinMode (LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, LOW);
   pinMode(PB0, INPUT_PULLUP);
   pinMode(PB1, INPUT_PULLUP);
   pinMode(PB2, INPUT_PULLUP);
@@ -54,7 +50,7 @@ void startLA() {
   //delay(1000);
 
   event = 0;
-  digitalWrite(boardLed, HIGH);
+  digitalWrite(LED_BUILTIN, HIGH);
   
   reset_timer();
   initial = GPIOB->regs->IDR;
@@ -86,7 +82,7 @@ void loop() {
 }
 
 void sendData() {
-  digitalWrite(boardLed, LOW);
+  digitalWrite(LED_BUILTIN, LOW);
 
   //initial data
   initial1=initial;