From a832073ff56ec7b9fdab76c231ccb5f7a849ff8e Mon Sep 17 00:00:00 2001
From: Junxiao Shi <git@mail1.yoursunny.com>
Date: Tue, 25 Dec 2018 10:22:35 -0500
Subject: [PATCH] esp8266: initial support

This is an initial implementation of logic analyzer
on ESP8266, using same serial protocol as STM32.
It has been tested with NodeMCU 1.0 board.
---
 esp8266.ino | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 esp8266.ino

diff --git a/esp8266.ino b/esp8266.ino
new file mode 100644
index 0000000..7b07fb1
--- /dev/null
+++ b/esp8266.ino
@@ -0,0 +1,89 @@
+#include <c_types.h>
+
+// number of samples to collect
+static const int N_SAMPLES = 300;
+
+// what pins to use, between 0 and 15
+static const int PIN0 = 4;
+static const int PIN1 = 5;
+static const int PIN2 = 12;
+static const int PIN3 = 14;
+// unused pins should be tied to the ground
+
+static_assert(PIN0 >= 0 && PIN0 < 16, "");
+static_assert(PIN1 >= 0 && PIN1 < 16, "");
+static_assert(PIN2 >= 0 && PIN2 < 16, "");
+static_assert(PIN3 >= 0 && PIN3 < 16, "");
+
+static constexpr uint32_t MASK = (1 << PIN0) | (1 << PIN1) | (1 << PIN2) | (1 << PIN3);
+
+void setup() {
+  Serial.begin(115200);
+
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, HIGH);
+
+  pinMode(PIN0, INPUT_PULLUP);
+  pinMode(PIN1, INPUT_PULLUP);
+  pinMode(PIN2, INPUT_PULLUP);
+  pinMode(PIN3, INPUT_PULLUP);
+}
+
+unsigned long times[N_SAMPLES]; // when did change happen
+uint32_t values[N_SAMPLES];     // GPI value at time
+
+extern void ICACHE_RAM_ATTR collect() {
+  times[0] = micros();
+  values[0] = GPI & MASK;
+  for (int i = 1; i < N_SAMPLES; ++i) {
+    uint32_t value;
+    do {
+      value = GPI & MASK;
+    } while (value == values[i - 1]);
+    times[i] = micros();
+    values[i] = value;
+  }
+}
+
+int compactValue(uint32_t value) {
+  int res = 0;
+  if ((value & (1 << PIN0)) != 0) {
+    res |= (1 << 0);
+  }
+  if ((value & (1 << PIN1)) != 0) {
+    res |= (1 << 1);
+  }
+  if ((value & (1 << PIN2)) != 0) {
+    res |= (1 << 2);
+  }
+  if ((value & (1 << PIN3)) != 0) {
+    res |= (1 << 3);
+  }
+  return res;
+}
+
+void report() {
+  Serial.println("S");
+  Serial.print(compactValue(values[0]));
+  Serial.print(":");
+  Serial.println(N_SAMPLES - 1);
+
+  for (int i = 1; i < N_SAMPLES; ++i) {
+    Serial.print(compactValue(values[i] ^ values[i - 1]));
+    Serial.print(":");
+    Serial.println(times[i] - times[0]);
+  }
+}
+
+void loop() {
+  while (Serial.read() != 'G') {
+    delay(1);
+  }
+
+  digitalWrite(LED_BUILTIN, LOW);
+  ESP.wdtDisable();
+  collect();
+  ESP.wdtEnable(WDTO_8S);
+  digitalWrite(LED_BUILTIN, HIGH);
+  report();
+}