mirror of
https://github.com/gillham/logic_analyzer.git
synced 2026-05-01 15:10:43 +03:00
1f418098b2
Set clock speed to 16MHz. Hopefully this value works fine with the client since the previous 100MHz was not the actual clockspeed anyway. Also, adjust the device.open.portdelay to 1500ms. People can test their own device for the fastest value, but this should be a safer default for most people and hopefully eliminates som frustration for first time users.
54 lines
2.3 KiB
INI
54 lines
2.3 KiB
INI
# Configuration for Arduino Generic Logic Analyzer profile
|
|
|
|
# The short (single word) type of the device described in this profile
|
|
device.type = AGLA
|
|
# A longer description of the device
|
|
device.description = Arduino Generic Logic Analyzer
|
|
# The device interface, SERIAL only
|
|
device.interface = SERIAL
|
|
# The device's native clockspeed, in Hertz.
|
|
device.clockspeed = 16000000
|
|
# Whether or not double-data-rate is supported by the device (also known as the "demux"-mode).
|
|
device.supports_ddr = false
|
|
# Supported sample rates in Hertz, separated by comma's
|
|
device.samplerates = 10, 20, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 50000, 100000, 200000, 500000, 1000000
|
|
# What capture clocks are supported
|
|
device.captureclock = INTERNAL
|
|
# The supported capture sizes, in bytes
|
|
device.capturesizes = 64, 128, 256, 512, 1024
|
|
# Whether or not the noise filter is supported
|
|
device.feature.noisefilter = false
|
|
# Whether or not Run-Length encoding is supported
|
|
device.feature.rle = false
|
|
# Whether or not a testing mode is supported
|
|
device.feature.testmode = false
|
|
# Whether or not triggers are supported
|
|
device.feature.triggers = true
|
|
# The number of trigger stages
|
|
device.trigger.stages = 1
|
|
# Whether or not "complex" triggers are supported
|
|
device.trigger.complex = false
|
|
|
|
# The total number of channels usable for capturing
|
|
device.channel.count = 5
|
|
# The number of channels groups, together with the channel count determines the channels per group
|
|
device.channel.groups = 1
|
|
# Whether the capture size is limited by the enabled channel groups
|
|
device.capturesize.bound = false
|
|
# Which numbering does the device support
|
|
device.channel.numberingschemes = DEFAULT
|
|
|
|
# Is a delay after opening the port and device detection needed? (0 = no delay, >0 = delay in milliseconds)
|
|
device.open.portdelay = 1500
|
|
# The receive timeout for the device (in milliseconds, 100 = default, <=0 = no timeout)
|
|
device.receive.timeout = 100
|
|
# Does the device need a high or low DTR-line to operate correctly? (high = true, low = false)
|
|
device.open.portdtr = true
|
|
# Which metadata keys correspond to this device profile? Value is a comma-separated list of (double quoted) names...
|
|
device.metadata.keys = "AGLAv0"
|
|
|
|
# In which order are samples sent back from the device? false = last sample first, true = first sample first
|
|
device.samples.reverseOrder = true
|
|
|
|
###EOF###
|