4678388c3c
board_lowlevel: More comments about clock initialization
2016-02-29 19:45:59 +01:00
ebbb645f4b
req_ctx: Fix allocation (allocate 1 block, not all) and call _init()
2016-02-29 17:57:51 +01:00
54cb3d017f
host_communication/card_emu: adapt to nwe req_ctx / queuing paradignm
2016-02-29 14:12:40 +01:00
f672e9d63a
req_ctx: Convert from hand-coded linked lists to linuxlist.h
...
This also removes the actual queuing code from req_ctx, and
leaves this to the caller. Only tw out of the existing states actually
required the ordering requirement enforced by the qeue, and in the
future we will need to have per-endpoint queues anyway. Both means it
is better to manage queues outside the req_ctx, and leve that as a pure
memory allocator.
2016-02-29 14:10:22 +01:00
b66ce249d0
req_ctx: Add better explanation about the various states
2016-02-29 14:07:07 +01:00
22bf67fc9c
card_emu: Use \r\n instead of \n
...
When printing over the actual serial port (as opposed to the unit
tests) we need CR+LF, and not just LF.
2016-02-29 10:18:59 +01:00
708d85c085
trace.h: Don't print file/function name in TRACE_DEBUG()
2016-02-29 10:16:05 +01:00
c0bd7f0aaa
mode_cardemu: Move GPIO detection to IRQ, use ring buffer for UART RX
...
We don't want to call into the bulk of card_emu.c from interrupt
context, so let's introduce a ring buffer as a softwre-FIFO between
the USART receiving a byte and the processing of that byte in
card_emu.c, which is then performed from the main loop outside
interrupt context.
2016-02-29 10:13:33 +01:00
47ee283d14
card_emu_io_statechg(): properly determine edges from levels
...
The caller might not have edge triggering and just gives us the
current state. we have to use that informtaion to determine the
edges when something is actually switched on or off.
2016-02-29 10:09:46 +01:00
99f62a6def
mode_cardemu: update_fidi just needs to execute
...
the actual translation of the Fi/Di values to the divider is
already made, we just need to update the USART divider here.
2016-02-29 10:08:49 +01:00
2ad0ca15a8
host_communication: Fix TRACE_ERROR syntax
2016-02-29 10:07:16 +01:00
43f7949fe0
card_emu: Add TRACE_DEBUG once TPDU header is sent to USB
2016-02-29 10:06:54 +01:00
b086ab0242
owhw: Fix GPIO for USIM1_RST (24, not 23!) and enable SET_USIM1_PRES
2016-02-29 10:05:53 +01:00
9dbc46e799
mode_cardemu: Proper enabling/disabling of USART IRQ sources
...
we always have to disable all intrerrupts that we don't want to be
enabled
2016-02-29 10:05:10 +01:00
ba0c688103
owhw: Make owhw/board.h the default for now
...
I will re-introduce simtrace2 hardware support later
2016-02-28 19:32:36 +01:00
4dc3db7beb
req_ctx: Use only 10 small buffers, and no large ones
2016-02-28 19:32:01 +01:00
203ea19227
req_ctx: Use the linked lists between req_ctx to ensure ordering
...
It is important we send the buffers in-order, and not re-order
them between the main program and the USB host.
2016-02-28 19:31:24 +01:00
bd71768e5f
mode_card_emu: connect the update_fidi() callback
2016-02-28 19:30:05 +01:00
2a6d3afd6c
re-introduce req_ctx buffers into the host communication
2016-02-28 19:29:14 +01:00
29f8f0e5d4
improvements in req_ctx debugging
2016-02-28 12:44:30 +01:00
2fb5996d30
owhw: fix GPIO definitions (output low level by default)
2016-02-28 12:34:26 +01:00
8c49636127
card_emu.c: avoid re-defining update_fidi() symbol
2016-02-27 16:24:09 +01:00
390760a006
add board/owhw.c
2016-02-27 16:23:46 +01:00
54a7cec7bd
Add card_emu_target.c to bind card_emu.c code into target firmware
2016-02-27 16:23:14 +01:00
17db2f1112
card_emu: Fix PTS checksum verification
...
If the checksum doesn't match, the card should not apply any Fi/Di
changes, not respond anything and simply expect the next TPDU.
2016-02-26 09:48:57 +01:00
4ba66d0098
implement forwarding of PTS/PPS from emulator to host PC + test case
2016-02-26 09:40:34 +01:00
86d047b8f4
card_emu_test: Verify content of emulator->reader bytes
2016-02-25 00:26:17 +01:00
0ef96d5735
card_emu: Ensure the length is properly set on a TPDU header rctx
2016-02-25 00:09:17 +01:00
0ab6fcd173
card_emu_tests: Verify context of USB request contexts
...
when the emulator has received some data, don't just check that
we see it coming up on teh USB side, but actually also check
the content of those messages
2016-02-25 00:08:22 +01:00
c043e64ef1
card_emu_tests: move test cases into functions
2016-02-24 23:26:55 +01:00
eef6c2a46c
card_emu_test: Add test for card-TX (reader-RX) APDU
2016-02-24 22:19:03 +01:00
f16b618755
card_emu: Fix the length checks for transmit beyond rctx->tot_len
2016-02-24 22:18:46 +01:00
22cdf2af59
card_sim: fix passing handle to tc_etu_*() functions
2016-02-24 22:18:11 +01:00
6bf8c12b13
update card_emu_tests to recent card_emu changes
2016-02-24 21:04:08 +01:00
042f0d366b
tc_etu: Add explicit enable/disable functions
...
We don't want the tc_etu to call into card_emu at all times,
e.g. while clock is applied, but RST is not yet present.
Rather, we want to explicitly enable it once RST is released
2016-02-24 21:01:50 +01:00
855ba9e168
card_emu: Ensure TX happens synchronously before state changes
...
we cannot first chage the state and then transmit the byte
asynchronously later, this introduces race conditions. Do it
in-line by explicit calls to the UART Tx function.
2016-02-24 21:00:46 +01:00
849269f4cc
add OWHW board.h file
2015-11-30 12:16:53 +01:00
2d3371ed65
split board.h into generic part and simtrace-specific part
2015-11-30 11:59:03 +01:00
61bb30e4ea
card_emu: Correctly handle SW after reader -> card data phase
2015-11-14 23:44:14 +01:00
84ec252ff4
card_emu_test: test APDUs with both Rx and Tx data phase
2015-11-14 23:05:13 +01:00
4d8046743e
card_emu: Fix state transitions for both Rx and Tx data phase
...
We now use the P3 value to determine how many characters to
receive (in case of Reader->Card payload phase).
2015-11-14 23:05:13 +01:00
b5288e8ac4
card_emu: Introduce new flush_rx_buffer() function and use it
2015-11-14 23:05:13 +01:00
e7194abb9e
card_emu: Ensure to re-set PTS state when coming out of reset
2015-11-14 23:05:10 +01:00
52922ffa32
card_emu: Properly handle end of a procedure-byte carrying REQ_CTX
...
how we proceed changes depending on whether we should continue to
receive or transmit...
2015-11-14 20:59:56 +01:00
05b41c62f6
card_emu: fix set_tpdu_state()
...
* don't enter a state we are already in
* enable the UART receiver not only when waiting for CLA, but also
generally when we're waiting for more data from the reader
2015-11-14 20:58:48 +01:00
2935b3c479
card_emu: detect end of TX data from CEMU_DATA_F_FINAL
...
When the USB host software sets this flag, we terminate the
TPDU transmission after the last character in this frame and
transition again to the WAIT_TPDU state.
2015-11-14 20:00:14 +01:00
b436286ed6
card_emu_tests: extend first TPDU test to sending PB + SW in response
2015-11-14 19:02:33 +01:00
836990d244
req_ctx: Fix compiler warnings
2015-11-14 17:38:04 +01:00
d79dc4f6f2
card_emu: Implement get_byte_pts()
2015-11-14 13:33:10 +01:00
4c473dad30
card_emu: Fail with assert in case next_tpdu_state from wrong state
2015-11-14 13:32:05 +01:00
Harald Welte