6246000b3a
iso7816_uart.c: Do not compile
2015-05-03 14:18:59 +02:00
40670422c8
apdu_split.py: Recover from failure in parsing on 0xa0
2015-05-03 12:59:44 +02:00
be235275fa
Added not working PTS parsing to host communication
2015-05-02 17:56:32 +02:00
7a7f98c9f2
ringbuf.c: rbuf peek function
2015-05-02 17:53:13 +02:00
bf12a6f79e
iso7816_uart: starting point for pts parsing
2015-05-02 13:22:07 +02:00
4bec8d8e26
host_communication.c: printf becomes TRACE_DEBUG
2015-04-21 23:03:59 +02:00
ddb1e7be1a
cciddriver.c: Removed loop waiting for host on CCID_Read
2015-04-21 23:02:43 +02:00
46a93672d3
mitm.py: Dirty hack for replacing ATR live
2015-04-21 23:00:52 +02:00
e4cbfe6f47
Moved ISR_PhoneRST into iso code file and simtrace header
2015-04-20 13:07:28 +02:00
3d5e3ab612
simtrace_iso7816.c: Remove unused _ISO7816_Init
2015-04-20 12:20:50 +02:00
b85f140636
iso7816_4.c: Removed time guard
2015-04-18 15:05:43 +02:00
fb91bb7069
Parsing ajusted: respond to phone requests
2015-04-18 14:34:08 +02:00
158c1dd448
simtrace.py: Use mitm.py in phone and mitm mode
2015-04-17 20:34:09 +02:00
4b8149363a
iso7816_4.c: CLK div differs for Master and Slave
...
Attention: Each init function has to enable and disable receiver and
transmitter on its own!
2015-04-17 18:50:25 +02:00
dea1f55fb7
board.h: RST pin low per default on startup
2015-04-17 17:16:42 +02:00
ad215aaf66
ccid.c: removed SMARTCARD_CONNECT_PIN check (always defined)
2015-04-16 15:00:07 +02:00
5384061761
mitm.py: Added apdu splitter code
2015-04-16 11:10:59 +02:00
2379ac8e32
main.c: Removed double declaration of var i
2015-04-16 11:09:37 +02:00
68cc859870
iso7816_4.c: Moved around lines, only sniffer works
2015-04-16 11:08:32 +02:00
ec9c09e9b9
Moved global Usart state into usart struct
2015-04-16 10:45:39 +02:00
f3211e6424
board.h: init more phone pins (as input)
2015-04-16 10:41:12 +02:00
9547e9f149
sniffer.py: Added apdu_split support
2015-04-14 22:18:30 +02:00
51925a6bec
apdu_split.py: Corrected last error
2015-04-14 21:04:14 +02:00
d4c8b51e86
apdu_split working with test message
2015-04-14 15:53:13 +02:00
e64aa5b878
apdu_split without C code remains
2015-04-14 15:07:33 +02:00
79c2a3a0c8
apdu_split: first try
2015-04-14 14:55:13 +02:00
2571458595
sniffer.py: Write out every received char
2015-04-13 22:40:40 +02:00
911bf26a55
sniffer.c: Enable/disable interrupts in init/exit function
2015-04-13 22:39:11 +02:00
d52201f6db
phone.c: Enable/disable interrupts on init/exit
2015-04-13 22:38:05 +02:00
dcce4c3244
phone.c: Callback routine for reenabling RST interrupt
2015-04-13 22:20:12 +02:00
c63da3f6d5
Makefile: Check for already opened ttyUSBx
...
If two ttyUSBx interfaces are read from by ts at the same time,
some letters arrive at one terminal and others in the second one.
Therefore only one terminal should be open at all times.
2015-04-13 22:09:50 +02:00
de68867402
main.c: Reset board if USB not configured
2015-04-12 15:20:57 +02:00
fd069dce73
iso7816_4.c: Increased max interations
2015-04-12 13:32:12 +02:00
b595e7cb53
Merge branch 'new_iso_init' (sniffer not working)
...
Conflicts:
firmware/src_simtrace/phone.c
firmware/src_simtrace/simtrace.h
2015-04-12 13:31:01 +02:00
2b8a18bf3a
Sniffer with ringbuf, works SOMETIMES
...
* Sniffer uses phone endpoints for communication and the ringbuffer
routines the phone communication uses
* Most times the Usart1 interrupt is not triggered, and therefore
no values are recorded
2015-04-12 09:31:36 +02:00
5c6a299c71
phone.c: Sniffer bus config make switch
2015-04-11 20:03:14 +02:00
3a47a4f10e
mitm.py: Decreased timeout
2015-04-11 18:16:14 +02:00
611bea8b4b
tc_etu: Corrected compiler warning
2015-04-11 18:15:51 +02:00
4db82e092f
ringbuffer implementation
2015-04-11 18:15:27 +02:00
94ddb91e33
mitm.py: New smartcard ATR, expanded pattern match
2015-04-11 12:29:41 +02:00
2ee3ec73f4
tc_etu.c: Fixed PIN initialisation compiler waring
2015-04-11 12:27:46 +02:00
542f9183bb
basic ringbuffer implementation
2015-04-11 09:31:15 +02:00
87ddfa8c23
phone.c: Bug fix: USB err format string interchanged
2015-04-11 08:44:40 +02:00
a0ca2d34ec
cciddriver.c: Remove ccid write printout
2015-04-11 08:43:31 +02:00
f2e53f0553
array to hex function, reduced usb timeout
2015-04-11 08:42:38 +02:00
e24b9ace89
ISO7816_Init: Initialized with USART
...
* ISO7816_Init: Takes Usart_info and CLK_SLAVE/CLK_MASTER as param
* ISO7816_SendChar, ISO7816_GetChar: Usart_info is passed
* ISO7816_Set_Reset_Pin function for CCID part
* iso7816_4.c: BOARD_ISO7816_BASE_USART replaced by USART_SIM
* Redundant _ISO7816_Init, _ISO7816_SendChar, _ISO7816_GetChar
functions removed
* All simtrace modes use iso7816_4.c functions instead of redefined
_ISO7816_xxx functions
2015-04-10 17:44:49 +02:00
3eab56e079
ISO7816_Init with more parameters, slave/master clock
2015-04-10 15:38:49 +02:00
95d6616ba1
Split init into configure and init
...
* Implemented configure, init, exit functions:
When a configuration is changed, interrupts for reset pins
should be disabled
* Moved variables shared between code files to simtrace.h
2015-04-09 22:38:47 +02:00
abcf3038d2
gitignore: Ignore ctags file
2015-04-09 19:47:45 +02:00
bf464ae566
Moved ccid related files to bord related folders
2015-04-09 19:47:45 +02:00
Christina Quast