bfd7354c86
usb.c: removed comment, named phone interface of MITM conf
...
String descriptor #0 always is the language descriptor.
The second USB interface is in the MITM configuration is
the interface to the phone.
2015-05-08 16:00:51 +02:00
4a30a3700b
Remove PR define, replace with TRACE_DEBUG
...
The define PR was introduced to switch quickly between TRACE levels
for specific debug print messages.
Now, it all became debug output, since it is not needed in normal
operation.
2015-05-08 15:34:45 +02:00
9dbf1c90ac
main.c: Set green LED when USB is configured
2015-05-06 08:46:32 +02:00
cb646bc729
command to change fidi send by host
2015-05-03 14:21:26 +02:00
be235275fa
Added not working PTS parsing to host communication
2015-05-02 17:56:32 +02:00
7a7f98c9f2
ringbuf.c: rbuf peek function
2015-05-02 17:53:13 +02:00
bf12a6f79e
iso7816_uart: starting point for pts parsing
2015-05-02 13:22:07 +02:00
4bec8d8e26
host_communication.c: printf becomes TRACE_DEBUG
2015-04-21 23:03:59 +02:00
e4cbfe6f47
Moved ISR_PhoneRST into iso code file and simtrace header
2015-04-20 13:07:28 +02:00
3d5e3ab612
simtrace_iso7816.c: Remove unused _ISO7816_Init
2015-04-20 12:20:50 +02:00
4b8149363a
iso7816_4.c: CLK div differs for Master and Slave
...
Attention: Each init function has to enable and disable receiver and
transmitter on its own!
2015-04-17 18:50:25 +02:00
ad215aaf66
ccid.c: removed SMARTCARD_CONNECT_PIN check (always defined)
2015-04-16 15:00:07 +02:00
2379ac8e32
main.c: Removed double declaration of var i
2015-04-16 11:09:37 +02:00
ec9c09e9b9
Moved global Usart state into usart struct
2015-04-16 10:45:39 +02:00
911bf26a55
sniffer.c: Enable/disable interrupts in init/exit function
2015-04-13 22:39:11 +02:00
d52201f6db
phone.c: Enable/disable interrupts on init/exit
2015-04-13 22:38:05 +02:00
dcce4c3244
phone.c: Callback routine for reenabling RST interrupt
2015-04-13 22:20:12 +02:00
de68867402
main.c: Reset board if USB not configured
2015-04-12 15:20:57 +02:00
b595e7cb53
Merge branch 'new_iso_init' (sniffer not working)
...
Conflicts:
firmware/src_simtrace/phone.c
firmware/src_simtrace/simtrace.h
2015-04-12 13:31:01 +02:00
2b8a18bf3a
Sniffer with ringbuf, works SOMETIMES
...
* Sniffer uses phone endpoints for communication and the ringbuffer
routines the phone communication uses
* Most times the Usart1 interrupt is not triggered, and therefore
no values are recorded
2015-04-12 09:31:36 +02:00
5c6a299c71
phone.c: Sniffer bus config make switch
2015-04-11 20:03:14 +02:00
611bea8b4b
tc_etu: Corrected compiler warning
2015-04-11 18:15:51 +02:00
4db82e092f
ringbuffer implementation
2015-04-11 18:15:27 +02:00
2ee3ec73f4
tc_etu.c: Fixed PIN initialisation compiler waring
2015-04-11 12:27:46 +02:00
542f9183bb
basic ringbuffer implementation
2015-04-11 09:31:15 +02:00
87ddfa8c23
phone.c: Bug fix: USB err format string interchanged
2015-04-11 08:44:40 +02:00
e24b9ace89
ISO7816_Init: Initialized with USART
...
* ISO7816_Init: Takes Usart_info and CLK_SLAVE/CLK_MASTER as param
* ISO7816_SendChar, ISO7816_GetChar: Usart_info is passed
* ISO7816_Set_Reset_Pin function for CCID part
* iso7816_4.c: BOARD_ISO7816_BASE_USART replaced by USART_SIM
* Redundant _ISO7816_Init, _ISO7816_SendChar, _ISO7816_GetChar
functions removed
* All simtrace modes use iso7816_4.c functions instead of redefined
_ISO7816_xxx functions
2015-04-10 17:44:49 +02:00
3eab56e079
ISO7816_Init with more parameters, slave/master clock
2015-04-10 15:38:49 +02:00
95d6616ba1
Split init into configure and init
...
* Implemented configure, init, exit functions:
When a configuration is changed, interrupts for reset pins
should be disabled
* Moved variables shared between code files to simtrace.h
2015-04-09 22:38:47 +02:00
bf464ae566
Moved ccid related files to bord related folders
2015-04-09 19:47:45 +02:00
6b02775638
phone.c: Check return values of USB_Write
2015-04-09 19:47:27 +02:00
e2dddd5885
Renamed simtrace_src to src_simtrace
2015-04-09 17:40:48 +02:00
Christina Quast