TERMINAL PROFILE form (Phone simulator):
- The compact block no longer shows the hex value (no room); Send +
Configure + status remain. Preset selector sits above the hex field.
- Bits are never spread horizontally: each byte is one vertical list.
Byte blocks are placed by the fixed TP_LAYOUT groups - bytes 1-12 in
2 columns, 13-16 in 4, 17-18 in 2, 19-21 in 3, 22-25 in 2, 26-28 in 3,
29-30 in 2, 31+ one per row - in strict byte order.
Bit descriptions audited against the pinned specs:
- Table regenerated from ETSI TS 102 223 V18.3.0 5.2 (bytes 1-39) with
the 3GPP-defined bits named per ETSI TS 131 111 V18.12.0 5.2; the
"reserved by 3GPP" placeholders are gone (tests guard this).
- Fixes found in the audit: byte 7 b6 PERFORM CARD APDU (pySim had
RESET), MO short message control by USIM, USSD string DO support in
Call Control by USIM, the earlier "Data available" typo.
- Presets: project default + Quectel example + Samsung S21+ 5G, Samsung
A55 5G, Xiaomi Redmi Note 10 LTE, Sony Xperia Z5c LTE, Huawei
E5573c/M150 (LTE), Huawei E173 3G modem, Nokia 7210 2G (9 total).
Also fixes a page-load TDZ regression: the custom-files init (which
calls t()) now runs after the language init (guard test added).
SW cache otaman-v174; help EN/RU updated; tests 236 Python + 374 frontend.
TERMINAL PROFILE:
- GET /api/terminal-profile returns the profile in effect + the CLI default;
POST /api/terminal-profile validates ({profile}, hex, even, 1-255 bytes),
stores it in memory and re-sends it, resetting the STK session like
/api/rescue (the shared _resend_terminal_profile helper; rescue now
delegates to it). __main__ keeps server.cli_terminal_profile.
- Phone tab: a TERMINAL PROFILE block next to STATUS and Polling with the
current hex/byte count, Send (re-send) and Configure. The Configure
dialog has a device-model preset selector, a hex field and a per-bit
form generated from a 264-entry table for TS 102 223 V18.3.0 5.2 bytes
1-33 (pySim's table as scaffold, later bytes/3GPP bits added from the
spec; beyond the table generic RFU labels). Form <-> hex sync both
ways, hex authoritative, bits preserved. Apply posts the new value.
- Presets: Xiaomi Mi A1 (project default), Quectel GSM module example.
In-memory only, no persistence.
Custom files:
- Canonical paths rooted at MF / ADF.USIM / ADF.ISIM; entries are
{path, name, kind}. The editor now uses root + parent-DF selector +
4-hex FID + alias, requires the parent DF to be defined first, rejects
duplicates, rewrites descendants when a DF's path changes and cascades
deletes after a confirmation.
- Legacy forms are normalized on load/import (3F00/... -> MF/..., relative
a153/4954 resolved against the custom DFs); unresolvable entries are
dropped and reported in the list.
- Tree injection matches by exact parent path via the new pysimFsNodePath
(same-FID DFs under different parents no longer collide);
profilerCustomNameForPath uses the same normalization.
SW cache otaman-v167; help EN/RU + docs/api.md + AGENTS updated.
Tests: 236 Python + 371 frontend.
SCP81:
- New listener mode "passthru": no local listener - the card's BIP
channels connect straight to a configured external platform
(host/port required), which terminates TLS and runs the dialog.
The status API reports mode/target (_SCP81_MODE/_SCP81_TARGET) and
clears them on stop. PWA mode select, hint, Start validation; TLS PSK
stays the default.
Proactive command decoding (Phone tab log):
- SEND SHORT MESSAGE (0x13) is now decoded: alpha, address (TON/NPI +
number), 3GPP-SMS TPDU (type, TP-MR, TP-DA, TP-PID 0x7F flagged as
SIM data download, TP-DCS, TP-VP, TP-UDL), UDH concatenation IEs, and
the TP-UD as text (GSM-7 with a septet unpacker, UCS2, 8-bit) or as a
TS 31.115 secured packet for PID 0x7F; malformed TPDUs fall back to
the raw hex line.
- PROVIDE LOCAL INFORMATION qualifier names completed per TS 102 223
V18.3.0: ESN (07), MEID (0B), Supported RATs (1A); 05 relabelled
"Reserved for GSM (Timing Advance)". Fixed in the server dict and
both frontend tables.
Header:
- Compact ADM badge next to the card indicator: "ADM ✓" green when
pySim's adm_verified is set, "ADM ✗" red otherwise, hidden without a
card session or when the server is down; updated ahead of the card
state-key early return so it never disturbs the connect/reset flow.
File manager:
- Sort pills (FID/Name), Probe all files button and progress line are
pinned above the tree instead of scrolling with it; the tree box cap
grows from 420px to 65vh.
SW cache otaman-v165; help EN/RU updated; tests 234 Python + 361 frontend.
Cards / SCP81:
- Cards is a top-level tab; presets gain PSK identity + key, HTTP-OTA
column, Edit/Update and a live PSK-map push into a running listener.
- SCP81 has Listener/Scripts pills; scripts are named local APDU lists
(Empty / Explore / Install from .cap / Delete templates), sent to the
server explicitly at start. The listener takes mode/host/port/script
only; PSK inputs and the .cap row are gone.
- Multi-PSK TLS listener: identity -> key lookup from the card presets
(POST /api/scp81/psk-map updates a running listener), unknown
identities log tls-psk-unknown and fail; handshake logs carry psk_match.
- Script engine: execution tracking (next/done/pending/results), a
resumed dialog sends only the unexecuted tail (unreported APDU is
resent), a fresh dialog restarts, listing continuation pages are
tracked separately (pending.pages/complete). Restart script button.
- POST /api/scp81/gen-install replaces the SCP81 ram-install queueing
(generation only; the .cap is never stored).
Profiler / snapshots:
- Snapshot comparison is always exact (mask checkboxes removed; the
first-4-bytes mask remains a profile-creation option).
- "matching records" line shows count + #record numbers.
- New Clone action: copy named "Copy of <profile>", opened in the editor.
- Matched-record count/numbers fix ("1 из 8 (#8)").
SCP80:
- Configurable / auto-fitted LOAD block size: each LOAD APDU encodes into
one SMS (pySim rejects secured packets above 140 octets, so a 240-byte
block could never be sent). Response reports the effective size and
clamps; encode failures are reported per step with the pySim message.
SW cache otaman-v161; docs/api.md, scp81-findings and help EN/RU updated.
Tests: 226 Python + 356 frontend.
- scp81.py: PSK TLS listener (stdlib ssl PSK callbacks) speaking the GP
HTTP administration dialog; configurable framing (chunked/Content-Length,
TLS record split, Apache-style/compact headers, Connection header,
keep-alive, Next-URI template with %d, TLS version/cipher, answer delay,
keylog for capture decryption)
- server.py: script responder + Response Scripting parsing (AF/AB, 80/23
TLVs), memory decoder, SCP81 start options, terminal-side timer
management, background-mode BIP events, permissive OPEN CHANNEL
- BIP fix: the RECEIVE DATA channel-data TLV length is BER long form
(36 81 <len>) above 127 bytes; a raw length byte is mis-parsed on the
card, so the large TLS records never reached its stack (a live card
fetched the script response and silently never processed it - endless
resume). The card now executes scripts and returns R-APDUs: memory
(13 applets, 50646 B NV free, 2402 B volatile), ISD, stored HTTP OTA
parameters, ELF and application registries
- frontend: SCP81 tab (listener, script selection, HTTP OTA log), phone
event forms, i18n; service worker v141
- docs: api.md, scp81-findings.md (attempt matrix + root cause analysis);
tools/scp81_decrypt.py decrypts listener captures via the keylog
- tests: 187 python + 337 frontend
- new 'Profile from snapshot' button in the Profiles toolbar: reuses the
snapshot picker (profilerSnapshotPickListHtml refactor) and then opens
the same scan form as Profile from card (profilerScanOpenForm), with
the profile name prefilled from the snapshot
- new profiler-build target 'profile-snapshot': the form's ignore list,
mask options and FCP/FCI mode apply to profilerScanSnapshot(), which
walks the snapshot's captured files instead of the card; uncaptured
contents produce rules without a content check, record files map to
exact record content, transparent files honor the masks
- profilerScanStart() pushes the generated profile and opens the editor
like the live scan; _scanSnapshot is cleared in the finally block
- RU entry 'Профиль из снимка'; tests for the snapshot rule builder
(exact/mask/ignore/uncaptured/record), the snapshot scan progress, the
picker wiring and the form title, plus a structural button check;
help EN/RU and READMEs updated; SW cache v130 -> v131.
The File: EF.DIR [LF] line doubled as the selection store: pysimFsClickFile
wrote a formatted display string there and pysimFsRead/Save parsed it back
(stripping '✗ ' and ' [TYPE]'). The pane now keeps the name in
pysimFsSelected, the redundant title is gone (FID/type/size/FCI remain in
the info block), and the dead pysimFsSelect() plus the unused 'File:' RU
entry are removed. Read/Save still re-select on the server first: pySim's
current selection is a shared cursor that tree expansion, scans and
commands move, so it cannot identify the file shown in the pane.
SW cache v121 -> v122; structural test updated.
- selecting an EF now renders an info block between the File: title and
the contents: FID, file type, size, record length/count (nulls skipped)
followed by the decoded FCI via the existing profilerFciPreviewItems()
decoder (no raw hex), matching the snapshot detail view
- pysimFsInfoHtml() is pure and reused by pysimFsClickFile(); the [LF]
shorthand stays in the title; custom files get the same metadata from
the temporary select probe
- tests: pysimFsInfoHtml in profiler.test.js (full response, missing
fci_hex, skipped nulls) and a structural check for #pysim-fs-info;
help EN/RU and READMEs updated; SW cache v119 -> v120.
- pysimFsLoadChildren now treats {success:false,error} (and any error
payload) as a failed listing: absent DFs/ADFs render as a red cross
without an expand arrow instead of silently opening empty; the
/api/tree 500 body also carries exists:false for shape consistency
with /api/select
- an expanded directory with zero children shows a gray (empty)
placeholder
- new Probe all files button (data-needs=card) in the tree header:
walks the whole model tree from MF, verifies every DF/ADF via
/api/tree and every file (incl. custom entries) via /api/select,
skips subtrees of absent dirs, shows N/total progress, toggles to
Stop, and reports present/absent counts with elapsed time; results
colour the current tree only
- tests: fs_load (error/retry/empty), fs_render (red cross, (empty)),
fs_probe (flags, absent-dir skip, custom files, stop, summary);
html structural check; help EN/RU, READMEs, AGENTS updated;
SW cache v115 -> v116.
- each row now shows Edit and Delete buttons (same styling as the
profiler list buttons) instead of the red X glyph
- Edit reloads the entry into the top form: the Add button becomes
Save (data-l10n updated too) and a Cancel button appears; submit
updates the entry in place, recomputing fid/parentFid and excluding
the edited row from the duplicate-path check
- Delete removes without confirmation; deleting the row being edited
cancels the edit and an earlier deletion shifts the edit index
- pysimCustomAdd renamed to pysimCustomSubmit; tests for the whole
flow; SW cache v114 -> v115.
- top-level tab order is now Remote APDU, SCP80, Profiler, Card reader,
Phone simulator; the profiler view moved with its button so the DOM
order matches the tab strip
- docs (help EN/RU, READMEs) and the tab-order test updated; SW cache
v113 -> v114.
- pysimFsSortChildren() groups DFs above EFs, then sorts each group by
FID (default) or case-insensitive symbolic name; missing names fall
back to the FID as the sort key; deterministic tie-break; the input
array is not mutated
- render uses the sorted copy, so lazily loaded directories and custom
file injections are sorted too
- FID / Name pills above the tree (pysimFsSetSort) persist the choice in
localStorage (otaman_fs_sort) and re-render without refetching
- tests for the comparator (DF priority, both keys, fallbacks, custom
entries, no mutation) and the pill wiring; help/README updated;
SW cache v108 -> v109.
Availability model: server-down / server-up-no-card / card-equipped.
- header shows a symbolic indicator dot (red/yellow/green, tooltip)
- a 5s probe tracks /api/version+/api/status while not fully ready; the
2s status poll takes over once connected
- controls declare data-needs='server' or 'card'; disabled + tooltip when
the state does not satisfy them: equip (server), status/reset, file
manager read/save/edit, raw APDU, profile-from-card, new snapshot,
profiler list Check card, event Send, RAM install/explore delete,
STK menu, Send STATUS, Verify vs pySim (server), pySim execute (server),
PLI save/poll toggle (server)
- pysimConnect no longer conflates server and card: it records both and
Connect stays usable without a card
- ramSendOta/ramInstallCap now use pysimFetch instead of raw fetch
(relative /api URLs broke custom server URLs)
Custom files moved from the Card reader sub-tabs to the Profiler list
tabs (Profiles / Card snapshots / Custom files); help/README/AGENTS
updated. Tests: availability gating, indicator structure, moved tab.
SW cache v103 -> v104.
Server measures every classified APDU (A4 select, B0 read binary, B2 read
record) from command to response: _collect_apdu_times() enables the tracer
(reattaching it if pySim nulled it) and /api/select + /api/read return
'apdu_times': [{type, ms}]. Collection is safe: handlers hold _CARD_LOCK.
Snapshots store per-file {select_ms, read_ms}, a ms value per record and
snapshot-level stats {select, read_binary, read_record}: {min, max, avg,
count} plus total_ms (wall time of the scan). The snapshot view gets a
summary under the title (files/records counts, scan time, min/avg/max per
command type) and shows select/read per file and read time per record.
Timings are display-only: checks, snapshots comparison and imports ignore
them (old snapshots simply show 'No timing data').
Tests: Python classifier/collection (tests/test_apdu_timing.py) and
frontend stats/accumulator/format/build-file/summary. SW cache v99 ->
v100; help, README and docs/api.md updated.
'Profile from card' and 'New snapshot' now focus the name field when the
dialog opens, and Enter in that field starts the scan
(profilerScanNameKeydown, ignored while the Scan button is disabled).
Tests for the key handler and the input wiring; SW cache v98 -> v99.
- Phone pill: STK menu, STATUS and polling and the subscribed-events list
in one row, proactive command log full-width below (room for more
elements)
- TR Config pill: response data injected into TERMINAL RESPONSEs;
currently the PROVIDE LOCAL INFORMATION dictionary, structured as
heading + body blocks for future proactive-command responses
- phoneSwitchSubtab() mirrors the other sub-tab switchers and sets help
anchors stk-menu / pli-dict; switchTab('phone') always opens Phone
- refreshDynamicI18n renders only the visible phone panel
- help EN/RU section 6 regrouped (6.4 STATUS polling under Phone, 6.5
TR Config response data), READMEs and AGENTS.md updated
- structural and behavioral tests (html.test.js, phone_tabs.test.js);
SW cache v93 -> v94
- C-APDU tab renamed Remote APDU (label untranslated EN/RU); Response
parser moved from a top-level tab to a pill under it
- Profiler moved from the Card reader sub-tabs to a top-level tab
- Proactive UICC moved to a top-level tab and renamed Phone simulator
- Card reader keeps File manager, Custom files, pySim command line,
Raw APDU
- modals (event send, profiler scan/snapshot, STK menu) moved outside
the tab containers so they can open from any tab
- STK overlay disables the top-level tabs while waiting for user input
- OTA PoR jump now goes to Remote APDU > Response parser
- help EN/RU restructured (2.8 Response parser, 5 Profiler, 6 Phone
simulator, subsequent sections renumbered, anchors kept); READMEs and
AGENTS.md updated
- html.test.js asserts the new tab/pill structure; SW cache v92 -> v93
catarrh