Robert Falkenberg d0505bdb55 WIP: Add option to set UE operation mode in EF_AD (Administrative Data) ...

Use ``--opmode=OPMODE`` in cmdline mode or column ``OPMODE`` in csv mode
to specify OPMODE as listed below.

Details:
The ``EF_AD`` field contains administrative data (AD).
It consists of four bytes ``B1``, ``B2``, ``B3``, ``B4``,
and optionally further bytes for future use.

Previous implementation only sets the MNC field appropriately
(located in `B4`) and sets all other bits/bytes to 0.

However, `B1` also defines the *UE operation mode* (see below).
For type approval operations, such as testing with a test uSIM,
this value could be set to `0x80` rather than `0x00`(= normal operation).
This may unlock some UE capabilities that are restricted in
normal operation mode.

Excerpt from [ETSI TS 131 102, 4.2.18](https://www.etsi.org/deliver/etsi_ts/131100_131199/131102/04.15.00_60/ts_131102v041500p.pdf):

```
B1 - UE operation mode:
	Coding:
	Initial value
	- '00' normal operation.
	- '80' type approval operations.
	- '01' normal operation + specific facilities.
	- '81' type approval operations + specific facilities.
	- '02' maintenance (off line).
	- '04' cell test operation.

B2 - Additional information:
	Coding:
	Reserved for future use

B3 - Additional information:
	Coding:
	- B3.b1: OFM setting (Ciphering Indicator)
	- B3.others: Reserved for future use

B4 - Length of MNC in the IMSI:
	Coding:
	- B4.b4..B4.b1: length:  '0010' (= 2) or '0011' (=3)
	- B4.others: Reserved for future use
```

**Legend:** Byte X, bit Y: BX.bY

Further reading: https://nickvsnetworking.com/usim-basics/

Change-Id: Ie9040c6b127c268878a0845ed73d0918ec6bbb08

2021-04-11 09:35:36 +00:00

21 KiB

Executable File

Raw Blame History

View Raw