When testing commands like get_profile_info, enable_profile,
disable_profile or the commands to manage notifications, we
should ensure that the correct profile is enabled before
executing the actual testcase.
Change-Id: Ie57b0305876bc5001ab3a9c3a3b5711408161b74
The class Iccid uses a BcdAdapter to encoded/decode the ICCID. This
works fine for ICCIDs that have an even (20) number of digits. In case
the digit count is odd (19), the ICCID the last digit requires padding.
Let's switch to PaddedBcdAdapter for encoding/decoding, to ensure that
odd-length ICCIDs are padded automatically.
Change-Id: I527a44ba454656a0d682ceb590eec6d9d0ac883a
Related: OS#6868
We have two test_enable_disable_profile method, the second one should
be called test_set_nickname.
Change-Id: I5ff79218fdafc8c42c8b58cc00be3e56e09d808b
There are more files where trailing digits are indicated using 'f' and
should be stripped during decode, including EF.MSISDN and EF.VGCS
This is not just a presentation issue, but actually rendered wrong data
before, see the modified test output where our "read_record_uicc.ok"
file contained "bcd_len: 7" but then only 6 BCD digits due to this bug.
Change-Id: I4571482da924a3d645caa297108279d182448d21
GPD_SPE_013 Table 6-3 defines two types of AID-REF-DO objects (both
are fully independed TLV IEs with the same name). The version with
tag '4F' identifies an SE application. It may contain an AID prefix
or even be of length 0 in case the rule should apply to all SE
applications. Then there is the version with tag 'C0', which must
always have length 0 and serves a flag to apply the rule to the
implicitly selected SE application. Technically both are completely
different things, so we must also treat them separately in the
pySim-shell code.
Related: OS#6681
Change-Id: I771d5e860b12215280e3d0a8c314ce843fe0d6a2
The card initialization normally takes place automatically. Nearly all
testcases implicitly cover this code-path. However, it is also possible
to skip the card initialization and do it at some later point. This is
commonly the case for unprovisioned card that require some custom APDUs
in a basic initialization step. When this step is done one would use
the "equip" command to level up to the full featured mode. This patch
adds a testcase for this scenario
Related: OS#6367
Change-Id: I01a03fa07d8c62164453bd707c5943288ff1a972
ETSI TS 102 221, section 7.3 specifies that UICCs (and eUICCs) may support two
different transport protocols: T=0 or T=1 or both. The spec also says that the
terminal must support both protocols.
This patch adds the necessary functionality to support the T=1 protocol
alongside the T=0 protocol. However, this also means that we have to sharpen
the lines between APDUs and TPDUs.
As this patch also touches the low level interface to readers it was also
manually tested with a classic serial reader. Calypso and AT command readers
were not tested.
Change-Id: I8b56d7804a2b4c392f43f8540e0b6e70001a8970
Related: OS#6367
When a pySim-shell command is not recognized, cmd2 prints "xyz is not a
recognized command, alias, or macro." This string is a normal print out
and not an exception, but during tests, it may point out a severe problem
and therefore it should be tread like an exception.
Related: OS#6367
Change-Id: I17be6af1547b31170622e17b9cfb9c492597670d
by default pySim-shell does all kinds of probing and file selection
on startup. This is to determine the card type and to find a suitable
card profile. However, in case the card is non yet provisioned this
probing may cause a error messages and even might upset the cards
internal state. So let's have a commandline option thrugh which we
can instruct pySim-shell to skip any initialization and to give us
a prompt immediately, so that we can enter custom APDUs
Related: OS#6367
Change-Id: I1d8a57de201fe7ad7cbcbc6f72969ea8521e821d
When pySim-shell has problems starting up, it exits with an error
code. This is detected by the testsuite, but it also causes an
early exit, so that the log file content are not printed.
Change-Id: Ic0f34eda32a7c557810abcb05a84e343741fdb8a
The tests that check the establishment of a secure channel currently only test
security level 3. Also the get_data command after it only tests data reception
from the card.
Let's extend the test coverage and test the SCP establishment for security
level 1 as well. Let's also add a get_status command to make sure sending data
to the card also works (without exceptions).
Related: OS#6367
Change-Id: Idff40b414a249e532df1bdce2a8deb9b0cb9718f
When we configure the tests to display file content, we only display files that
we compare, let's also display log file contents from pySim-shell. This will
be useful in situations where we only have log output from the tests, but no
access to the file system of the test host.
Related: OS#6601
Change-Id: Ibf6f78d7e71c213c7ca1caaf21c4c890e892261e
When pySim-shell is called by a testcase, a logfile is createted. The logfile
filename contains the testcase name. However, a testcase may run pySim-shell
multiple times. In this case we overwrite the log from previous run. Let's use a
counter to generate unique file names for each run, so that we won't lose logs
from previous runs.
Related: OS#6601
Change-Id: Ib2195d9b2231f74d0a6c4fb28f4889b6c45efb1e
When we get rid of temporary files, we delete those using a wildcard,
but for the logs from pySim-shell we explicitly memorize the name
of the pySim-shell logfile and delete it later by this explicit
name. This is not necessary, let's just delete all log files present
using a wildcard.
Related: OS#6601
Change-Id: I09dc7e59d1a3dcb68f54e3a8dccb86a1bc6c9ee6
This adds a construct + pyosmocore.tlv based declarative encoder/decoder
for the EF.EARFCNList file used in the context of NB-IoT in later
release USIMs.
Change-Id: I16797ca58c3ad6ebaf588d04fec011a0cbcfcef3
The problems with test_list_and_rm_notif (see also change id
I7d0b6a998499d84f0eb4e24592ad43210ac54806) are now resolved, so
we can re-enable the testcase now.
Closes: SYS#7094
Change-Id: I95eb3b9c02a69653797851197e882ea9316805fc
In our construct models we frequently use a context parameter "total_len",
we also pass this parameter to construct when we decode files, but we
do not pass it when we generate files. This is a problem, because when
total_len is used in the construct model, this parameter must be known
also when decoding the file.
Let's make sure that the total_len is properly determined and and passed
to construct (via pyosmocom).
Related: OS#5714
Change-Id: I1b7a51594fbc5d9fe01132c39354a2fa88d53f9b
The testcase euicc.test_list_and_rm_notif fails due to a problem
with the eUICC. The eUICC reports the following error when a
delete notification attempt is made:
"delete_notification_status": "undefinedError"
Let's temporarily disable this testcase until the problem is resolved.
Change-Id: I7d0b6a998499d84f0eb4e24592ad43210ac54806
This patch adds a comprehensive testsuite for pySim-shell. The testsuite
is based on python's unittest framework in combination with pySim-shell
scripts.
Related: OS#6531
Change-Id: Ieae1330767a6e55e62437f5f988a0d33b727b5de
