d9824887c9
At the momemnt pysim takes the supplied ADM pin number and interprets it as ascii string. This ascii string (max 8 digitis) is then padded with 0xff bytes if necessary and sent to the card. This limits the range of possible ADM keys and it is not possible to deal with situataions where the ADM pin consists of arbitrary bytes. At the momemnt pysim-prog forbis anything that is longer than 8 digits. Lets also check if there are 16 digits and if yes interpret them as raw bytes. - when the adm pin is 16 digits long, interpret the string as raw bytes (hex). Change-Id: If0ac0d328c64b57bc4d45d985a4a516930053344 Related: SYS#4245
pySim-prog - Utility for programmable SIM/USIM-Cards
This repository contains a Python-language program that can be used to program (write) certain fields/parameters on so-called programmable SIM/USIM cards.
Such SIM/USIM cards are special cards, which - unlike those issued by regular commercial operators - come with the kind of keys that allow you to write the files/fields that normally only an operator can program.
This is useful particularly if you are running your own cellular network, and want to issue your own SIM/USIM cards for that network.
Homepage
The official homepage of the project is http://osmocom.org/projects/pysim/wiki
GIT Repository
You can clone from the official libosmocore.git repository using
git clone git://git.osmocom.org/pysim.git
There is a cgit interface at http://git.osmocom.org/pysim/
Mailing List
There is no separate mailing list for this project. However, discussions related to pysim-prog are happening on the openbsc@lists.osmocom.org mailing list, please see https://lists.osmocom.org/mailman/listinfo/openbsc for subscription options and the list archive.
Please observe the Osmocom Mailing List Rules when posting.
Contributing
Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards
We are currently accepting patches by e-mail to the above-mentioned mailing list.
Usage
- Program customizable SIMs. Two modes are possible:
- one where you specify every parameter manually :
./pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -i -s
- one where they are generated from some minimal set :
./pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z <random_string_of_choice> -j <card_num>
With <random_string_of_choice> and <card_num>, the soft will generate
'predictable' IMSI and ICCID, so make sure you choose them so as not to
conflict with anyone. (for eg. your name as <random_string_of_choice> and
0 1 2 ... for <card num>).
You also need to enter some parameters to select the device : -t TYPE : type of card (supersim, magicsim, fakemagicsim or try 'auto') -d DEV : Serial port device (default /dev/ttyUSB0) -b BAUD : Baudrate (default 9600)
- Interact with SIMs from a python interactive shell (ipython for eg :)
from pySim.transport.serial import SerialSimLink from pySim.commands import SimCardCommands
sl = SerialSimLink(device='/dev/ttyUSB0', baudrate=9600) sc = SimCardCommands(sl)
sl.wait_for_card()
# Print IMSI
print sc.read_binary(['3f00', '7f20', '6f07'])
# Run A3/A8
print sc.run_gsm('00112233445566778899aabbccddeeff')